---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Fri 01/23/04: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:48 AM - San Diego - Fresno, shared costs (James Courtney) 2. 02:12 PM - Fuel Cap Engraving, Labeling, Indentifying (Wayne Cahoon @ Aircraft Engravers) 3. 06:21 PM - Subject: Wheel LPants (GOLDPILOT@aol.com) 4. 07:46 PM - Re: Fuel Cap Engraving, Labeling, Indentifying (FLYaDIVE@aol.com) 5. 07:53 PM - Re: Fuel Cap Engraving, Labeling, Indentifying (bob milligan) 6. 08:04 PM - Re: Fuel Cap Engraving, Labeling, Indentifying (FLYaDIVE@aol.com) 7. 08:53 PM - Re: Fuel Cap Engraving, Labeling, (Gil Alexander) 8. 09:30 PM - Re: Re: Fuel Cap Engraving, Labeling, Indentifying (Charles Adams) 9. 09:37 PM - Re: Re: Fuel Cap Engraving, Labeling, (Gil Alexander) ________________________________ Message 1 _____________________________________ Time: 12:48:11 AM PST US From: "James Courtney" Subject: TeamGrumman-List: San Diego - Fresno, shared costs --> TeamGrumman-List message posted by: "James Courtney" Hey Team, I've got a friend who lives near Carlsbad and is looking for a way to make a couple of trips to Fresno (I believe for business) over the next little while (he hasn't clarified what that means with me either) without having to make the drive. If anyone's based in that area and looking for an excuse to get out and fly either for hire or on a shared cost basis my friend might be interested. He's a good guy and would be willing to pay reasonably for the convienience but we're not talking a Gulfstream here either;) Please let me know if you'd be interested. Thanks and happy flying. Jamey AA5B N72T @ KSQL (okay, still @ KWJF getting my left tank leak fixed :-( ) ________________________________ Message 2 _____________________________________ Time: 02:12:25 PM PST US From: "Wayne Cahoon @ Aircraft Engravers" , , , , , , , , , , , , , , , , , , , , , , , , , , , Subject: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: "Wayne Cahoon @ Aircraft Engravers" Have your Fuel Caps engraved, it's permanent and easy to read. Aircraft Engravers has been engraving fuel caps for over 14 years. You can see our web page at http://engravers.net/aircraft/fuel_caps.htm Other types of engraving jobs can be viewed at http://engravers.net/main/ac_products.htm There are a few sets of loaner fuel caps for the more common styles if your tanks are wet. FREE shipping by USPS Priority mail for all fuel cap engraving orders in the month of February. Wayne Cahoon Aircraft Engravers (860) 653-2780 (860) 653-7324 Fax http://engravers.net/ ________________________________ Message 3 _____________________________________ Time: 06:21:01 PM PST US From: GOLDPILOT@aol.com Subject: Subject: TeamGrumman-List: Wheel LPants --> TeamGrumman-List message posted by: GOLDPILOT@aol.com Call Fletchair, talk to Garner. They have wheel pants stc'd and not stc'd. They will even paint them for you. The problem is they might not have the hardware to mount then. I have heard that the hardware is hard to come by. I bought a set of mains from them six months ago however I supplied the hardware. David ________________________________ Message 4 _____________________________________ Time: 07:46:18 PM PST US From: FLYaDIVE@aol.com Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: FLYaDIVE@aol.com In a message dated 1/23/04 5:15:39 PM Eastern Standard Time, wayne@engravers.net writes: > --> TeamGrumman-List message posted by: "Wayne Cahoon @ Aircraft Engravers" < > wayne@engravers.net> > > Have your Fuel Caps engraved, it's permanent and easy to read. Aircraft > Engravers has been engraving fuel caps for over 14 years. > You can see our web page at http://engravers.net/aircraft/fuel_caps.htm > Other types of engraving jobs can be viewed at http://engravers.net/main/ac_ > products.htm > There are a few sets of loaner fuel caps for the more common styles if your > tanks are wet. > > FREE shipping by USPS Priority mail for all fuel cap engraving orders in the > month of February. > > Wayne Cahoon > Aircraft Engravers > (860) 653-2780 > (860) 653-7324 Fax > http://engravers.net/ ================== Interesting.. And what is engraved on the fuel caps? Barry "Chop'd Liver" ________________________________ Message 5 _____________________________________ Time: 07:53:06 PM PST US Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying From: bob milligan --> TeamGrumman-List message posted by: bob milligan on 1/23/04 7:46 PM, FLYaDIVE@aol.com at FLYaDIVE@aol.com wrote: > Interesting.. And what is engraved on the fuel caps? > > Barry > "Chop'd Liver" "GAS" Bob Milligan ________________________________ Message 6 _____________________________________ Time: 08:04:26 PM PST US From: FLYaDIVE@aol.com Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: FLYaDIVE@aol.com In a message dated 1/23/04 10:53:55 PM Eastern Standard Time, flyer.bob@verizon.net writes: > > "GAS" > > > > Bob Milligan ====== Burp! GAS Burp! As if the Line Boys would put in water... well maybe JP5/5? Barry ________________________________ Message 7 _____________________________________ Time: 08:53:01 PM PST US From: Gil Alexander Indentifying Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: Gil Alexander Indentifying Barry, I would suggest this as a minimum... from FAR 23.1157 (b) Powerplant fluid filler openings. The following apply: (1) Fuel filler openings must be marked at or near the filler cover with -- (i) The word "fuel"; (ii) For reciprocating engine powered airplanes, the minimum fuel grade; And though I can't find a FAR for it, why not the capacity.... for the line personnel who want to sell more than the tank can take.... Apparently capacity is Legally marked inside the cockpit... (2) For fuel systems having selector controls, the usable fuel capacity available at each selector control position must be indicated near the selector control. If it's engraved, then the stupid sticky label would never peel off.....: ) gil in rainy Tucson... but Tiger in L80....: ( -- the valley fog will end sometime soon.... At 08:46 PM 1/23/2004, you wrote: >--> TeamGrumman-List message posted by: FLYaDIVE@aol.com > >In a message dated 1/23/04 5:15:39 PM Eastern Standard Time, >wayne@engravers.net writes: > > > --> TeamGrumman-List message posted by: "Wayne Cahoon @ Aircraft > Engravers" >< > > wayne@engravers.net> > > > > Have your Fuel Caps engraved, it's permanent and easy to read. Aircraft > > Engravers has been engraving fuel caps for over 14 years. > > You can see our web page at http://engravers.net/aircraft/fuel_caps.htm > > Other types of engraving jobs can be viewed at >http://engravers.net/main/ac_ > > products.htm > > There are a few sets of loaner fuel caps for the more common styles if >your > > tanks are wet. > > > > FREE shipping by USPS Priority mail for all fuel cap engraving orders in >the > > month of February. > > > > Wayne Cahoon > > Aircraft Engravers > > (860) 653-2780 > > (860) 653-7324 Fax > > http://engravers.net/ >================== >Interesting.. And what is engraved on the fuel caps? > >Barry >"Chop'd Liver" > > ________________________________ Message 8 _____________________________________ Time: 09:30:44 PM PST US From: Charles Adams Subject: Re: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: Charles Adams Capicity is in the form of a placard or engraving which is listed in the TCDS and as such required for airworthiness. Charlie Adams > > From: Gil Alexander Indentifying > Date: 2004/01/23 Fri PM 08:52:36 PST > To: teamgrumman-list@matronics.com > Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, > Indentifying > > ________________________________ Message 9 _____________________________________ Time: 09:37:47 PM PST US From: Gil Alexander Indentifying Subject: Re: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, Indentifying --> TeamGrumman-List message posted by: Gil Alexander Indentifying Charlie... missed that one... from the TCDS (f) Near fuel caps: Model AA-5 and Model AA-5A with Standard Fuel Tanks: * "FUEL MINIMUM 80/87 OCTANE 19 U.S. GAL. CAP" * Model AA-5A with Optional Fuel Tanks: * "FUEL MINIMUM 80/87 OCTANE 26.3 U.S. GAL. CAP" * Model AA-5B and Model AG-5B: * "FUEL MINIMUM 100/100 OCTANE 26.3 U.S. GAL. CAP" But the TCDS only says "placard" ... It doesn't give a manufacture's part number, or say it has to be the original placard...... Isn't engraving an equivalent to a placard?? To answer the original question from Barry....this is what should be engraved..... for a Tiger... FUEL MINIMUM 80/87 OCTANE 26.3 U.S. GAL. CAP ...gil A At 10:30 PM 1/23/2004, you wrote: >--> TeamGrumman-List message posted by: Charles Adams > >Capicity is in the form of a placard or engraving which is listed in the >TCDS and as such required for airworthiness. > >Charlie Adams > > > > From: Gil Alexander Indentifying > > Date: 2004/01/23 Fri PM 08:52:36 PST > > To: teamgrumman-list@matronics.com > > Subject: Re: TeamGrumman-List: Fuel Cap Engraving, Labeling, > > Indentifying > > > > > >