----------------------------------------------------------
                           TeamGrumman-List Digest Archive
                                      ---
                     Total Messages Posted Thu 02/19/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 01:47 AM - Re: TeamGrumman-List Digest: 15 Msgs - 02/17/04  (GOLDPILOT@aol.com)
     2. 05:44 AM - Re: Mixture Cable  (Garner Rice)
     3. 09:32 AM - Re: Mixture Cable  (TeamGrumman@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 01:47:36 AM PST US
From: GOLDPILOT@aol.com
Subject: TeamGrumman-List: Re: TeamGrumman-List Digest: 15 Msgs - 02/17/04

--> TeamGrumman-List message posted by: GOLDPILOT@aol.com

Time: 02:36:41 PM PST US
From: Mark Miller <mark@edenfx.com>
Subject: TeamGrumman-List: Paint shop
I think it was at Elk Grove arpt, Q40, on the 092 radial from Sac, 10.8 NM 
and the guy's name is Mark Morgan.  He did a terriffic job, sanded the wings and

body, no stripper.  Painted the same scheme, ala 1976, Red/Whit/Blue. 
(Centennial colors).
I'll look for his phone # and pass it on.  This was done around 1998 so info 
is not current.  He also did the Tiger I have now also around 1998.
David






________________________________  Message 2  _____________________________________


Time: 05:44:52 AM PST US
From: "Garner Rice" <dmir700751sw@hotmail.com>
Subject: Re: TeamGrumman-List: Mixture Cable

--> TeamGrumman-List message posted by: "Garner Rice" <dmir700751sw@hotmail.com>

For which aircraft. I will pull the drawinga nd get the exact length
Garner


>From: "flyv35b" <flyv35b@ashcreekwireless.com>
>Reply-To: teamgrumman-list@matronics.com
>To: <teamgrumman-list@matronics.com>
>Subject: Re: TeamGrumman-List: Mixture Cable
>Date: Wed, 18 Feb 2004 06:10:14 -0800
>
>--> TeamGrumman-List message posted by: "flyv35b" 
><flyv35b@ashcreekwireless.com>
>
>I don't know.  I doubt that there is anyplace you will find the length
>listed.  Ask Fletchair if they know.
>
>Cliff
>----- Original Message -----
>From: <TeamGrumman@aol.com>
>To: <teamgrumman-list@matronics.com>
>Subject: TeamGrumman-List: Mixture Cable
>
>
> > --> TeamGrumman-List message posted by: TeamGrumman@aol.com
> >
> > off the top of your heads, Cliff?, what is the length of the mixture
>cable.
> >
> > otherwise, where can I look it up without taking one out and measuring 
>it?
> >
>






________________________________  Message 3  _____________________________________


Time: 09:32:42 AM PST US
From: TeamGrumman@aol.com
Subject: Re: TeamGrumman-List: Mixture Cable

--> TeamGrumman-List message posted by: TeamGrumman@aol.com


In a message dated 02/19/04 05:45:36 AM, dmir700751sw@hotmail.com writes:


> For which aircraft. I will pull the drawinga nd get the exact length
> Garner
> 

Hi Garner, I have a new 4 foot mixture cable.   I was wondering if it would 
fit an AA5x.
Gary