Today's Message Index:
----------------------
1. 11:45 PM - screws for mag wires (TeamGrumman@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | screws for mag wires |
--> TeamGrumman-List message posted by: TeamGrumman@aol.com
I removed the mag leads (harness) for replacement about 6 weeks ago when I
started taking things apart. Tonight when I went to install the new harness,
I
can't find the screws that hold them onto the mags. I have the harness,
just no screws. Any ideas where I can get some new ones?
I have the new (new Lycoming) cylinders, ported, polished, and bored 0.010
over, installed, the JPI EDM 800 is installed and all probes installed, new
hoses installed, new engine mounts (isolators), new air filter, oil filter adaptor
and oil filter installed, baffles installed, and the prop is ready to be
installed (I had it overhauled and repitched).
The Garmin 340/430 combo and the SL-60 is ready to be installed.
Gary
I need a GPS antenna for the SL-60, just in case you have one lying around.
Dave gets back Monday and the new cowling will be finished up and a new set
of tooling made within a couple of weeks.
Next step is to finish the interior and install the comm antennas in the
dorsil fin.
just a reminder, I need screws for the mags and a GPS antenna for an SL-60
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|