----------------------------------------------------------
                           TeamGrumman-List Digest Archive
                                      ---
                     Total Messages Posted Sat 05/29/04: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:45 PM - screws for mag wires  (TeamGrumman@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:45:41 PM PST US
From: TeamGrumman@aol.com
Subject: TeamGrumman-List: screws for mag wires

--> TeamGrumman-List message posted by: TeamGrumman@aol.com

I removed the mag leads (harness) for replacement about 6 weeks ago when I 
started taking things apart.   Tonight when I went to install the new harness,
I 
can't find the screws that hold them onto the mags.   I have the harness, 
just no screws.   Any ideas where I can get some new ones?

I have the new (new Lycoming) cylinders, ported, polished, and bored 0.010 
over, installed, the JPI EDM 800 is installed and all probes installed, new 
hoses installed, new engine mounts (isolators), new air filter, oil filter adaptor

and oil filter installed, baffles installed, and the prop is ready to be 
installed (I had it overhauled and repitched).   

The Garmin 340/430 combo and the SL-60 is ready to be installed.   

Gary

I need a GPS antenna for the SL-60, just in case you have one lying around.

Dave gets back Monday and the new cowling will be finished up and a new set 
of tooling made within a couple of weeks.   

Next step is to finish the interior and install the comm antennas in the 
dorsil fin.   
just a reminder, I need screws for the mags and a GPS antenna for an SL-60