Today's Message Index:
----------------------
1. 12:07 AM - Re: screws for mag wires (Bob Milligan)
2. 03:28 PM - Re: screws for mag wires (RICK POLLACK)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: screws for mag wires |
--> TeamGrumman-List message posted by: Bob Milligan <flyer.bob@verizon.net>
Gary, You might get lucky and find that Ron Monson, owner of
Performance Aero Engines at Bracket may have the screws you need. He
overhauls lots of engines and replaces lots of mags.
Performance Aero: 909-593-5008
Bob Milligan
On May 29, 2004, at 11:42 PM, TeamGrumman@aol.com wrote:
> --> TeamGrumman-List message posted by: TeamGrumman@aol.com
>
> I removed the mag leads (harness) for replacement about 6 weeks ago
> when I
> started taking things apart. Tonight when I went to install the new
> harness, I
> can't find the screws that hold them onto the mags. I have the
> harness,
> just no screws. Any ideas where I can get some new ones?
>
> I have the new (new Lycoming) cylinders, ported, polished, and bored
> 0.010
> over, installed, the JPI EDM 800 is installed and all probes
> installed, new
> hoses installed, new engine mounts (isolators), new air filter, oil
> filter adaptor
> and oil filter installed, baffles installed, and the prop is ready to
> be
> installed (I had it overhauled and repitched).
>
> The Garmin 340/430 combo and the SL-60 is ready to be installed.
>
> Gary
>
> I need a GPS antenna for the SL-60, just in case you have one lying
> around.
>
> Dave gets back Monday and the new cowling will be finished up and a
> new set
> of tooling made within a couple of weeks.
>
> Next step is to finish the interior and install the comm antennas in
> the
> dorsil fin.
> just a reminder, I need screws for the mags and a GPS antenna for an
> SL-60
>
>
> _-
> =======================================================================
> _-
> =======================================================================
> _-
> =======================================================================
> _-
> =======================================================================
> >
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: screws for mag wires |
--> TeamGrumman-List message posted by: "RICK POLLACK" <rdp123@verizon.net>
Gary, will you be installing the new cowl on your plane?
Rick
----- Original Message -----
From: TeamGrumman@aol.com
To: teamgrumman-list@matronics.com
Sent: Saturday, May 29, 2004 11:42 PM
Subject: TeamGrumman-List: screws for mag wires
--> TeamGrumman-List message posted by: TeamGrumman@aol.com
I removed the mag leads (harness) for replacement about 6 weeks ago when I
started taking things apart. Tonight when I went to install the new harness,
I
can't find the screws that hold them onto the mags. I have the harness,
just no screws. Any ideas where I can get some new ones?
I have the new (new Lycoming) cylinders, ported, polished, and bored 0.010
over, installed, the JPI EDM 800 is installed and all probes installed, new
hoses installed, new engine mounts (isolators), new air filter, oil filter adaptor
and oil filter installed, baffles installed, and the prop is ready to be
installed (I had it overhauled and repitched).
The Garmin 340/430 combo and the SL-60 is ready to be installed.
Gary
I need a GPS antenna for the SL-60, just in case you have one lying around.
Dave gets back Monday and the new cowling will be finished up and a new set
of tooling made within a couple of weeks.
Next step is to finish the interior and install the comm antennas in the
dorsil fin.
just a reminder, I need screws for the mags and a GPS antenna for an SL-60
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|