---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sun 05/30/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:07 AM - Re: screws for mag wires (Bob Milligan) 2. 03:28 PM - Re: screws for mag wires (RICK POLLACK) ________________________________ Message 1 _____________________________________ Time: 12:07:57 AM PST US From: Bob Milligan Subject: Re: TeamGrumman-List: screws for mag wires --> TeamGrumman-List message posted by: Bob Milligan Gary, You might get lucky and find that Ron Monson, owner of Performance Aero Engines at Bracket may have the screws you need. He overhauls lots of engines and replaces lots of mags. Performance Aero: 909-593-5008 Bob Milligan On May 29, 2004, at 11:42 PM, TeamGrumman@aol.com wrote: > --> TeamGrumman-List message posted by: TeamGrumman@aol.com > > I removed the mag leads (harness) for replacement about 6 weeks ago > when I > started taking things apart. Tonight when I went to install the new > harness, I > can't find the screws that hold them onto the mags. I have the > harness, > just no screws. Any ideas where I can get some new ones? > > I have the new (new Lycoming) cylinders, ported, polished, and bored > 0.010 > over, installed, the JPI EDM 800 is installed and all probes > installed, new > hoses installed, new engine mounts (isolators), new air filter, oil > filter adaptor > and oil filter installed, baffles installed, and the prop is ready to > be > installed (I had it overhauled and repitched). > > The Garmin 340/430 combo and the SL-60 is ready to be installed. > > Gary > > I need a GPS antenna for the SL-60, just in case you have one lying > around. > > Dave gets back Monday and the new cowling will be finished up and a > new set > of tooling made within a couple of weeks. > > Next step is to finish the interior and install the comm antennas in > the > dorsil fin. > just a reminder, I need screws for the mags and a GPS antenna for an > SL-60 > > > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > > > > ________________________________ Message 2 _____________________________________ Time: 03:28:55 PM PST US From: "RICK POLLACK" Subject: Re: TeamGrumman-List: screws for mag wires --> TeamGrumman-List message posted by: "RICK POLLACK" Gary, will you be installing the new cowl on your plane? Rick ----- Original Message ----- From: TeamGrumman@aol.com To: teamgrumman-list@matronics.com Sent: Saturday, May 29, 2004 11:42 PM Subject: TeamGrumman-List: screws for mag wires --> TeamGrumman-List message posted by: TeamGrumman@aol.com I removed the mag leads (harness) for replacement about 6 weeks ago when I started taking things apart. Tonight when I went to install the new harness, I can't find the screws that hold them onto the mags. I have the harness, just no screws. Any ideas where I can get some new ones? I have the new (new Lycoming) cylinders, ported, polished, and bored 0.010 over, installed, the JPI EDM 800 is installed and all probes installed, new hoses installed, new engine mounts (isolators), new air filter, oil filter adaptor and oil filter installed, baffles installed, and the prop is ready to be installed (I had it overhauled and repitched). The Garmin 340/430 combo and the SL-60 is ready to be installed. Gary I need a GPS antenna for the SL-60, just in case you have one lying around. Dave gets back Monday and the new cowling will be finished up and a new set of tooling made within a couple of weeks. Next step is to finish the interior and install the comm antennas in the dorsil fin. just a reminder, I need screws for the mags and a GPS antenna for an SL-60