----------------------------------------------------------
                           TeamGrumman-List Digest Archive
                                      ---
                     Total Messages Posted Thu 02/16/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:16 AM - Re: My 2 cents (or .02 cents if you are from CA)  (flyv35b)
     2. 07:28 PM - Re: My 2 cents (or .02 cents if you are from CA)  (jetinc@comcast.net)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:16:20 AM PST US
From: "flyv35b" <flyv35b@ashcreekwireless.com>
Subject: Re: TeamGrumman-List: My 2 cents (or .02 cents if you are from CA)

--> TeamGrumman-List message posted by: "flyv35b" <flyv35b@ashcreekwireless.com>

I doubt if you would sell very many to Bonanza owners, Gary, since the later 
models, at least, came from the factory with a nice fiberglass glareshield 
that is leather covered and has panel flood lighting all the way across. 
Mine still looks nearly like new after 35 years.  It also comes off with 
just 2 screws in a couple of minutes.

Cliff
----- Original Message ----- 
From: <TeamGrumman@aol.com>
Sent: Wednesday, February 15, 2006 10:00 PM
Subject: Re: TeamGrumman-List: My 2 cents (or .02 cents if you are from CA)


> --> TeamGrumman-List message posted by: TeamGrumman@aol.com
>
>
> In a message dated 2/15/06 11:00:44 AM, tscott165@cableone.net writes:
>
>
>>
>> My apologies. I thought from the name that it was Grumman 
>> specific.=A0BTW, are
>> you the Gary that=A0 sells Grumman-specific eyebrows? I need one. Whom do
>> I=A0contact?
>>
>> Scott
>> tscott165@cableone.net
>>
>
> Yep, that's me.   Oddly enough I have the tooling for Piper Arrow and
> Cherokee eyebrows as well.   If Mike Crissafolli would get off his butt, 
> I'd make one
> for the Bonanza as well.
>
> That aside, send me an email, to TeamGrumman@aol.com, requesting one and 
> I'll
> follow up with more instructions.
>
> Gary
>
>
> 







 
 
 



________________________________  Message 2  _____________________________________


Time: 07:28:10 PM PST US
From: jetinc@comcast.net
Cc: TeamGrumman@aol.com
Subject: Re: TeamGrumman-List: My 2 cents (or .02 cents if you are from CA)

--> TeamGrumman-List message posted by: jetinc@comcast.net

Howdy All,

Just wanted to say that Gary installed one of his eyebrows in my Tiger a couple
of years ago.  It's beautiful and I still get compliments on it when I take a
new flyer up.  Really a nice looking eyebrow that should have been installed
from the factory.

Clear Skys,
Eddie

-------------- Original message -------------- 
From: TeamGrumman@aol.com 

> --> TeamGrumman-List message posted by: TeamGrumman@aol.com 
> 
> 
> In a message dated 2/15/06 11:00:44 AM, tscott165@cableone.net writes: 
> 
> 
> > 
> > My apologies. I thought from the name that it was Grumman specific.=A0BTW,
are 
> > you the Gary that=A0 sells Grumman-specific eyebrows? I need one. Whom do 
> > I=A0contact? 
> > 
> > Scott 
> > tscott165@cableone.net 
> > 
> 
> Yep, that's me. Oddly enough I have the tooling for Piper Arrow and 
> Cherokee eyebrows as well. If Mike Crissafolli would get off his butt, I'd 
> make one 
> for the Bonanza as well. 
> 
> That aside, send me an email, to TeamGrumman@aol.com, requesting one and I'll

> follow up with more instructions. 
> 
> Gary 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 

Howdy All,

Just wanted to say that Gary installed one of his eyebrows in my Tiger a couple
of years ago. It's beautiful and I still get compliments on it when I take a
new flyer up. Really a nice looking eyebrow that should have been installed from
the factory.

Clear Skys,
Eddie

-------------- Original message -------------- 
From: TeamGrumman@aol.com 

 -- TeamGrumman-List message posted by: TeamGrumman@aol.com 
 
 
 In a message dated 2/15/06 11:00:44 AM, tscott165@cableone.net writes: 
 
 
  
  My apologies. I thought from the name that it was Grumman specific.=A0BTW, are

  you the Gary that=A0 sells Grumman-specific eyebrows? I need one. Whom do 
  I=A0contact? 
  
  Scott 
  tscott165@cableone.net 
  
 
 Yep, that's me. Oddly enough I have the tooling for Piper Arrow and 
 Cherokee eyebrows as well. If Mike Crissafolli would get off his butt, I'd 
 make one 
 for the Bonanza as well. 
 
 That aside, send me an email, to TeamGrumman@aol.com, requesting one and I'll


  follow up with more instructions. 
 
 Gary 
 
 
 
 
 
 
 
 
 
 
 
 
 </ht
 ml>