Today's Message Index:
----------------------
1. 05:34 AM - Oil Cooler UpGrade INFO needed (FLYaDIVE@AOL.COM)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Oil Cooler UpGrade INFO needed |
--> TeamGrumman-List message posted by: FLYaDIVE@aol.com
Hi Gang:
I'm looking for information on the oil cooler upgrade.
My questions are:
1 - Who is the Manufacture and what is the part number for the original oil
cooler for BOTH the O-320 and O-360 engines?
2 - Who is the Manufacture and what is the part number for the Upgrade oil
cooler for BOTH the O-320 and O-360 engines?
3 - Am I correct in that that the upgrade increases the number of vanes from
5 to 6?
4 - Are there any issues in fitting the upgrade cooler into the location of
the original?
5 - What kind of improvement can be expected, are there any numbers available?
6 - I have seen on many installation that a reducer is used on the oil cooler
to reduce the thread size from 3/8" NPT to 1/4" NPT is there any reason WHY
ALL the associated hosing and fittings are not 3/8" NPT?
6a - I ask the above question because when looking at some data I have found
on the Internet it would only seem logical to collect the data with the least
amount of restriction to the cooler. What are your thoughts?
Thanks for being there Gang and thanks for the help.
Barry
"Chop'd Liver"
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|