Today's Message Index:
----------------------
1. 08:51 AM - Re: Tiger Wheels (923te)
2. 09:09 AM - Re: Tiger Wheels (Don Curry)
3. 05:27 PM - Tiger Annual (Don Curry)
4. 05:29 PM - Tiger Annual (Don Curry)
5. 05:41 PM - Re: Tiger Annual (linn Walters)
6. 06:02 PM - Re: Tiger Annual (Don Curry)
7. 10:09 PM - Re: Tiger Annual (teamgrumman@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tiger Wheels |
Hi Scott,
While this topic has been covered quite well already, I have uploaded the
Tiger Aircraft LLC Maintenance Manual Chapter 32 which covers the Main
Wheels beginning on page 14 with a nice diagram on page 16 that you may find
useful.
http://members.cox.net/923te/CHAPTER%2032_TEXT%20LANDING%20GEAR.pdf
Regards,
Ned
----- Original Message -----
From: "Scott Boyce" <tscott165@cableone.net>
Sent: Saturday, June 02, 2007 5:38 PM
Subject: TeamGrumman-List: Tiger Wheels
I have a main wheel off to fix a flat and greased the bearings while
I was at it. This is a 1977 Tiger. Have a question about the washers
and felt seals. The pictures on Bondline did not help. On the inner
part the bearing goes in then a washer 153-0400, felt seal, another
153-0400, and snapring just like my old Cherokee. The outer is
different. Seal retainer 153-01500 is C-shaped and holds the felt
ring. I assume felt faces outward and the metal surface of the washer
faces inward, then the 1530300 washer and snapring. Believe me I was
careful taking this apart but the parts were mixed, not at all like
in the parts manual.
Anybody care to share the correct reassembly order. PIctures in the
parts and service manuals are not in fine enough detail.
Scott
AA5B, 28339
Boise, Id
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Wow, that has a lot more detail than the old AA5B version I have! Is the
entire manual available online? What about the Parts Man?
Thanks in advance,
Don/AG5B
-----Original Message-----
From: owner-teamgrumman-list-server@matronics.com
[mailto:owner-teamgrumman-list-server@matronics.com] On Behalf Of 923te
Sent: Monday, June 04, 2007 11:51 AM
Subject: Re: TeamGrumman-List: Tiger Wheels
Hi Scott,
While this topic has been covered quite well already, I have uploaded the
Tiger Aircraft LLC Maintenance Manual Chapter 32 which covers the Main
Wheels beginning on page 14 with a nice diagram on page 16 that you may find
useful.
http://members.cox.net/923te/CHAPTER%2032_TEXT%20LANDING%20GEAR.pdf
Regards,
Ned
----- Original Message -----
From: "Scott Boyce" <tscott165@cableone.net>
Sent: Saturday, June 02, 2007 5:38 PM
Subject: TeamGrumman-List: Tiger Wheels
I have a main wheel off to fix a flat and greased the bearings while
I was at it. This is a 1977 Tiger. Have a question about the washers
and felt seals. The pictures on Bondline did not help. On the inner
part the bearing goes in then a washer 153-0400, felt seal, another
153-0400, and snapring just like my old Cherokee. The outer is
different. Seal retainer 153-01500 is C-shaped and holds the felt
ring. I assume felt faces outward and the metal surface of the washer
faces inward, then the 1530300 washer and snapring. Believe me I was
careful taking this apart but the parts were mixed, not at all like
in the parts manual.
Anybody care to share the correct reassembly order. PIctures in the
parts and service manuals are not in fine enough detail.
Scott
AA5B, 28339
Boise, Id
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Can anyone recommend a good IA to do an annual on a Tiger at the Henderson,
NC airport (about 60mi north of Raleigh)? The annual has expired, so I
can't take it anywhere.
Thanks in advance,
Don
AG5B
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Can anyone recommend a good IA to do an annual on a Tiger at the Henderson,
NC airport (about 60mi north of Raleigh)? The annual has expired, so I
can't take it anywhere.
Thanks in advance,
Don
AG5B
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tiger Annual |
AFAIK, the airplane doesn't give a hoot about the paperwork. ;-)
OK, there's always the ferry permit route for the queasy.
Linn
Don Curry wrote:
>
>Can anyone recommend a good IA to do an annual on a Tiger at the Henderson,
>NC airport (about 60mi north of Raleigh)? The annual has expired, so I
>can't take it anywhere.
>Thanks in advance,
>Don
>AG5B
>
>
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Seems I read somewhere that FSDO would NOT (their emphasis) approve a ferry
permit just to get an annual. If somebody knows different, that would be
wonderful news! Don
-----Original Message-----
From: owner-teamgrumman-list-server@matronics.com
[mailto:owner-teamgrumman-list-server@matronics.com] On Behalf Of linn
Walters
Sent: Monday, June 04, 2007 8:44 PM
Subject: Re: TeamGrumman-List: Tiger Annual
<pitts_pilot@bellsouth.net>
AFAIK, the airplane doesn't give a hoot about the paperwork. ;-)
OK, there's always the ferry permit route for the queasy.
Linn
Don Curry wrote:
<currydon@bellsouth.net>
>
>Can anyone recommend a good IA to do an annual on a Tiger at the Henderson,
>NC airport (about 60mi north of Raleigh)? The annual has expired, so I
>can't take it anywhere.
>Thanks in advance,
>Don
>AG5B
>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Tiger Annual |
Unless something has changed, all an A&P/IA has to do is fill out the
form saying the annual has expired and the plane is airworthy enough
for a flight to a place for the annual. I've done two. I think Cliff
has done several also.
-----Original Message-----
From: Don Curry <currydon@bellsouth.net>
Sent: Mon, 4 Jun 2007 5:27 pm
Subject: TeamGrumman-List: Tiger Annual
<currydon@bellsouth.net>
Can anyone recommend a good IA to do an annual on a Tiger at the
Henderson,
NC airport (about 60mi north of Raleigh)? The annual has expired, so I
can't take it anywhere.
Thanks in advance,
Don
AG5B
________________________________________________________________________
from AOL at AOL.com.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|