---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sat 12/15/07: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:09 AM - Re: Cowling update (WILLIAM KELLY) 2. 11:41 AM - Re: Cowling update (flyv35b) ________________________________ Message 1 _____________________________________ Time: 12:09:39 AM PST US From: "WILLIAM KELLY" Subject: Re: TeamGrumman-List: Cowling update Coincidentally, I've been thinking along the same lines the last couple of days. A few months ago I took a less radical step and opened up the ash tray cutout to about two and a half times its original size, threw away the ash tray, and fashioned an aluminum plate that snaps in to cover the new opening. Now I can at least reach in there with a rag or a vacuum attachment and clean out all the crud that collects under the console. However, it WOULD be nice to be able to easily remove the upper half of the console to access the fuel selector valve. I don't think it would be hard to split it just like Cliff describes. Bill Kelly Absolutely! The center console plastic on the 2 seater is a PITA. I've threatened to cut it in two pieces near the spar, rivet in a doubler and attach the two pieces with screws. Would make taking it out much much easier. Another example that engineers should be made to work on the products they design and you might see some improvements in serviceability. Cliff ________________________________ Message 2 _____________________________________ Time: 11:41:29 AM PST US From: "flyv35b" Subject: Re: TeamGrumman-List: Cowling update Bill, what I had in mind was splitting the console plastic pretty much over the spar all the way up both sides and across the top. This would allow t he forward piece to be removed upward and forward to eliminate the excess b ending of the sides that is now required to remove the one piece part. Thi s results is cracking and damage to the old plastic. There are probably ot her ways to make the split that would work just as well. Cliff ----- Original Message ----- From: WILLIAM KELLY To: teamgrumman-list@matronics.com Sent: Friday, December 14, 2007 11:55 PM Subject: Re: TeamGrumman-List: Cowling update Coincidentally, I've been thinking along the same lines the last couple o f days. A few months ago I took a less radical step and opened up the ash tray cutout to about two and a half times its original size, threw away the ash tray, and fashioned an aluminum plate that snaps in to cover the new o pening. Now I can at least reach in there with a rag or a vacuum attachmen t and clean out all the crud that collects under the console. However, it WOULD be nice to be able to easily remove the upper half of the console to access the fuel selector valve. I don't think it would be hard to split it just like Cliff describes. Bill Kelly Absolutely! The center console plastic on the 2 seater is a PITA. I'v e threatened to cut it in two pieces near the spar, rivet in a doubler and attach the two pieces with screws. Would make taking it out much much easi er. Another example that engineers should be made to work on the products they design and you might see some improvements in serviceability. Cliff =5F-=========================================================== =5F- =5F-= -- Please Support Your Lists This Month -- =5F-= (And Get Some AWESOME FREE Gifts!) =5F- =5F-= November is the Annual List Fund Raiser. Click on =5F-= the Contribution link below to find out more about =5F-= this year's Terrific Free Incentive Gifts! =5F- =5F-= List Contribution Web Site: =5F- =5F-= --> http://www.matronics.com/contribution =5F- =5F-= Thank you for your generous support! =5F- =5F-= -Matt Dralle, List Admin. =5F- =5F-=========================================================== =5F-= - The TeamGrumman-List Email Forum - =5F-= Use the Matronics List Features Navigator to browse =5F-= the many List utilities such as List Un/Subscription, =5F-= Archive Search & Download, 7-Day Browse, Chat, FAQ, =5F-= Photoshare, and much much more: =5F-= --> http://www.matronics.com/Navigator=3FTeamGrumman-List =5F-=========================================================== =5F-= - MATRONICS WEB FORUMS - =5F-= Same great content also available via the Web Forums! =5F-= --> http://forums.matronics.com =5F-=========================================================== --------------------------------------------------------------------------- --- 07 11:29 AM -- ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.