---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Fri 09/10/10: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:56 AM - Re: Power Flow. This fills the old hole. (grumpyparts) 2. 06:36 AM - Re: Power Flow. This fills the old hole. (Scott Trejo) 3. 11:29 AM - Picture size. (Gary Vogt) 4. 11:36 AM - Re: Power Flow. This fills the old hole. (Gary Vogt) 5. 02:46 PM - Re: Picture size. (Bruce Smith) ________________________________ Message 1 _____________________________________ Time: 03:56:43 AM PST US Subject: TeamGrumman-List: Re: Power Flow. This fills the old hole. From: "grumpyparts" Thanks Cliff, glad I'm not the only one having that problem. Wanted to mention it before but thought may be I'm the only one viewing these posts on the forum site. Tip if using IE go to View, zoom, and reduce to about 25%, don't forget to put it back to 100% or you won't be able to read anything. When I post pictures on the forum I go to the trouble to ensure the picture size stays within the normal viewing area without having to scroll. Whilst I'm on my shop box could we try and keep the topic title the same, any slight change in the title causes another topic to be raised on the forum which makes following a subject some what tiresome. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=312007#312007 ________________________________ Message 2 _____________________________________ Time: 06:36:28 AM PST US From: Scott Trejo Subject: Re: TeamGrumman-List: Power Flow. This fills the old hole. Gary, I see that this is a picture of the old cowling ( original ) but with the exhaust exiting out the exhaust ramp and not the hole in the cowling. Is this an exhaust STC? Scott Trejo On Sep 9, 2010, at 1:19 PM, Gary Vogt wrote: > I see a lot of scabbed on pieces of aluminum to fill in the hole where the old tail pipe came out. Very amateur. These are fiberglass hole covers that are contoured to the shape of the cowling. > > > > ________________________________ Message 3 _____________________________________ Time: 11:29:39 AM PST US From: Gary Vogt Subject: TeamGrumman-List: Picture size. The pics were taken with my iPhone. Then, iPhoto imports them. Then I attach them to the email. They show up as roughly 1 meg files. I have a 24 inch iMac. The pics fit my screen just fine. Pic of worlds most expensive Cheetah panel. ________________________________ From: grumpyparts Sent: Fri, September 10, 2010 3:54:21 AM Subject: TeamGrumman-List: Re: Power Flow. This fills the old hole. Thanks Cliff, glad I'm not the only one having that problem. Wanted to mention it before but thought may be I'm the only one viewing these posts on the forum site. Tip if using IE go to View, zoom, and reduce to about 25%, don't forget to put it back to 100% or you won't be able to read anything. When I post pictures on the forum I go to the trouble to ensure the picture size stays within the normal viewing area without having to scroll. Whilst I'm on my shop box could we try and keep the topic title the same, any slight change in the title causes another topic to be raised on the forum which makes following a subject some what tiresome. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=312007#312007 ________________________________ Message 4 _____________________________________ Time: 11:36:33 AM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Power Flow. This fills the old hole. Both are Tigers with the internal Power Flow Exhaust system. ________________________________ From: Scott Trejo Sent: Thu, September 9, 2010 6:38:28 PM Subject: Re: TeamGrumman-List: Power Flow. This fills the old hole. Gary, I see that this is a picture of the old cowling ( original ) but with the exhaust exiting out the exhaust ramp and not the hole in the cowling. Is this an exhaust STC? Scott Trejo On Sep 9, 2010, at 1:19 PM, Gary Vogt wrote: I see a lot of scabbed on pieces of aluminum to fill in the hole where the old tail pipe came out. Very amateur. These are fiberglass hole covers that are contoured to the shape of the cowling. > > > ________________________________ Message 5 _____________________________________ Time: 02:46:28 PM PST US From: Bruce Smith Subject: Re: TeamGrumman-List: Picture size. Gary, iPhone 4 photo? Awesome panel, by the way! I've never looked behind the panel, so I'm guessing that the higher position of the AI and the DG are due to the control column running below. Is this correct? Bruce On Sep 10, 2010, at 2:25 PM, Gary Vogt wrote: > The pics were taken with my iPhone. Then, iPhoto imports them. Then I attach them to the email. They show up as roughly 1 meg files. I have a 24 inch iMac. The pics fit my screen just fine. > > Pic of worlds most expensive Cheetah panel. > > From: grumpyparts > To: teamgrumman-list@matronics.com > Sent: Fri, September 10, 2010 3:54:21 AM > Subject: TeamGrumman-List: Re: Power Flow. This fills the old hole. > > > Thanks Cliff, glad I'm not the only one having that problem. Wanted to mention it before but thought may be I'm the only one viewing these posts on the forum site. Tip if using IE go to View, zoom, and reduce to about 25%, don't forget to put it back to 100% or you won't be able to read anything. > > When I post pictures on the forum I go to the trouble to ensure the picture size stays within the normal viewing area without having to scroll. > > Whilst I'm on my shop box could we try and keep the topic title the same, any slight change in the title causes another topic to be raised on the forum which makes following a subject some what tiresome. > > > > > Read this topic online here: > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.