---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Mon 03/14/11: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:08 AM - Re: Cont: annual on Tiger --- these are all different. (flyv35b) 2. 06:13 AM - Re: Cont: annual on Tiger (flyv35b) 3. 09:50 AM - Re: Cont: annual on Tiger (Gary Vogt) 4. 11:12 AM - Re: Cont: annual on Tiger (James Courtney) 5. 12:40 PM - Re: Cont: annual on Tiger (flyv35b) 6. 06:23 PM - Re: Cont: annual on Tiger (Gary Vogt) 7. 06:36 PM - Re: Cont: annual on Tiger (allenc3@bellsouth.net) ________________________________ Message 1 _____________________________________ Time: 06:08:55 AM PST US From: flyv35b Subject: Re: TeamGrumman-List: Cont: annual on Tiger --- these are all different. On 3/13/2011 12:37 PM, Gary Vogt wrote: > First pic: heat riser clamp broken. > > Next pics: Look closely. These are pics of the inner cylinder baffle. I > first noticed that it had been installed with the plate on the outside > between the fins. Then, I looked inside. It's an inner cylinder baffle > for an O320. It's 1/2 inch too short. > > Between this, the missing baffle straps, poorly installed baffle seals, > and baffles so bent and worn through, it's a wonder there are no signs > of excess heat on the cylinders. > Also, the exhaust riser clamp is broken. Good luck getting the nut off the bolt. Hopefully it will break easily or you will have to cut it off. Looks like a lot of deferred maintenance for a long time! Cliff ________________________________ Message 2 _____________________________________ Time: 06:13:07 AM PST US From: flyv35b Subject: Re: TeamGrumman-List: Cont: annual on Tiger On 3/13/2011 12:29 PM, Gary Vogt wrote: > A home made nose gear boot with a zipper down the back side. > The idea has some merit. Even splitting the boot part way back from the strut, enough so you could easily pull it down to the fairing and around the strut V-fairing would help getting the cowl on and off. You could glue and sew two pieces of Velcro on to the rubber possibly, or maybe a couple of snaps. Cliff ________________________________ Message 3 _____________________________________ Time: 09:50:22 AM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Cont: annual on Tiger How about replacing the boot with an STCd fiberglass piece that resembles . . . . ________________________________ From: flyv35b Sent: Mon, March 14, 2011 6:10:36 AM Subject: Re: TeamGrumman-List: Cont: annual on Tiger On 3/13/2011 12:29 PM, Gary Vogt wrote: > A home made nose gear boot with a zipper down the back side. > The idea has some merit. Even splitting the boot part way back from the strut, enough so you could easily pull it down to the fairing and around the strut V-fairing would help getting the cowl on and off. You could glue and sew two pieces of Velcro on to the rubber possibly, or maybe a couple of snaps. Cliff ________________________________ Message 4 _____________________________________ Time: 11:12:00 AM PST US From: "James Courtney" Subject: RE: TeamGrumman-List: Cont: annual on Tiger But that won't catch all your loose parts and bits of safety wireL Jamey From: owner-teamgrumman-list-server@matronics.com [mailto:owner-teamgrumman-list-server@matronics.com] On Behalf Of Gary Vogt Sent: Monday, March 14, 2011 9:45 AM Subject: Re: TeamGrumman-List: Cont: annual on Tiger How about replacing the boot with an STCd fiberglass piece that resembles . . . . _____ From: flyv35b Sent: Mon, March 14, 2011 6:10:36 AM Subject: Re: TeamGrumman-List: Cont: annual on Tiger _____ No virus found in this message. Checked by AVG - www.avg.com ________________________________ Message 5 _____________________________________ Time: 12:40:38 PM PST US From: flyv35b Subject: Re: TeamGrumman-List: Cont: annual on Tiger On 3/14/2011 9:44 AM, Gary Vogt wrote: > How about replacing the boot with an STCd fiberglass piece that > resembles . . . . > > > ------------------------------------------------------------------------ > *From:* flyv35b > *To:* teamgrumman-list@matronics.com > *Sent:* Mon, March 14, 2011 6:10:36 AM > *Subject:* Re: TeamGrumman-List: Cont: annual on Tiger > You talking about a separate fairing what would attach to the bottom of the cowling via a flange and nutplcates inside the cowling? ________________________________ Message 6 _____________________________________ Time: 06:23:43 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Cont: annual on Tiger You talking about a separate fairing what would attach to the bottom of the cowling via a flange and nutplates inside the cowling? Yes. But, it won't need to come off. ________________________________ From: flyv35b Sent: Mon, March 14, 2011 12:37:21 PM Subject: Re: TeamGrumman-List: Cont: annual on Tiger On 3/14/2011 9:44 AM, Gary Vogt wrote: > How about replacing the boot with an STCd fiberglass piece that > resembles . . . . > > > ------------------------------------------------------------------------ > *From:* flyv35b > *To:* teamgrumman-list@matronics.com > *Sent:* Mon, March 14, 2011 6:10:36 AM > *Subject:* Re: TeamGrumman-List: Cont: annual on Tiger > You talking about a separate fairing what would attach to the bottom of the cowling via a flange and nutplcates inside the cowling? ________________________________ Message 7 _____________________________________ Time: 06:36:53 PM PST US From: "allenc3@bellsouth.net" Subject: Re: TeamGrumman-List: Cont: annual on Tiger Claude Allen Sent from my iPad On Mar 14, 2011, at 9:18 PM, Gary Vogt wrote: > You talking about a separate fairing what would attach to the bottom of > the cowling via a flange and nutplates inside the cowling? > > Yes. But, it won't need to come off. > > From: flyv35b > To: teamgrumman-list@matronics.com > Sent: Mon, March 14, 2011 12:37:21 PM > Subject: Re: TeamGrumman-List: Cont: annual on Tiger > > > On 3/14/2011 9:44 AM, Gary Vogt wrote: > > How about replacing the boot with an STCd fiberglass piece that > > resembles . . . . > > > > > > > > ------------------------------------------------------------------------ > > *From:* flyv35b > > *To:* teamgrumman-list@matronics.com > > *Sent:* Mon, March 14, 2011 6:10:36 AM > > *Subject:* Re: TeamGrumman-List: Cont: annual on Tiger > > > You talking about a separate fairing what would attach to the bottom of > the cowling via a flange and nutplcates inside the > > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.