---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Thu 08/18/11: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:04 PM - instrument panel overlay liquidation (Gary Vogt) 2. 03:14 PM - Re: instrument panel overlay liquidation (Michael W. Meyer) 3. 03:48 PM - Re: instrument panel overlay liquidation (Deems Herring) 4. 04:41 PM - Re: instrument panel overlay liquidation (Brock Windsor) 5. 06:55 PM - Re: instrument panel overlay liquidation (Mel Beckman) 6. 06:55 PM - Re: instrument panel overlay liquidation (Mel Beckman) 7. 07:01 PM - Re: instrument panel overlay liquidation (matt drahz) 8. 08:45 PM - Re: instrument panel overlay liquidation (Gary Vogt) 9. 08:51 PM - Re: instrument panel overlay liquidation (Gary Vogt) 10. 08:51 PM - Re: instrument panel overlay liquidation (Gary Vogt) 11. 09:03 PM - Re: instrument panel overlay liquidation (BILL9725@AOL.COM) ________________________________ Message 1 _____________________________________ Time: 03:04:35 PM PST US From: Gary Vogt Subject: TeamGrumman-List: instrument panel overlay liquidation I'm in the final steps of getting the instrument panel overlays FAA-PMA app roved as a direct replacement. -Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance. -That means the 20 sets I have left can't be used.=0A=0ABuy up as many as you want for $100/each including shipping. -That's about $50 savings on each one. -S tock them and sell them yourself. -Not sure how much the PMAd parts will be. ________________________________ Message 2 _____________________________________ Time: 03:14:15 PM PST US From: "Michael W. Meyer" Subject: Re: TeamGrumman-List: instrument panel overlay liquidation Hi Gary, I'll take one. Thanks, Michael Michael W. Meyer Tiger N74086 San Francisco, CA michael@flightsked.com On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote: > I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement. Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance. That means the 20 sets I have left can't be used. > > Buy up as many as you want for $100/each including shipping. That's about $50 savings on each one. Stock them and sell them yourself. Not sure how much the PMAd parts will be. > > > ________________________________ Message 3 _____________________________________ Time: 03:48:48 PM PST US From: Deems Herring Subject: RE: TeamGrumman-List: instrument panel overlay liquidation I'll take one Deems Herring mailto:dsleepy47@hotmail.com From: teamgrumman@yahoo.com Subject: TeamGrumman-List: instrument panel overlay liquidation I'm in the final steps of getting the instrument panel overlays FAA-PMA app roved as a direct replacement. Problem is=2C the FAA requires they go out with a chem film plating (alodine) for corrosion resistance. That means th e 20 sets I have left can't be used. Buy up as many as you want for $100/each including shipping. That's about $50 savings on each one. Stock them and sell them yourself. Not sure how much the PMAd parts will be. ________________________________ Message 4 _____________________________________ Time: 04:41:32 PM PST US From: Brock Windsor Subject: Re: TeamGrumman-List: instrument panel overlay liquidation what do they look like? --- On Thu, 8/18/11, Gary Vogt wrote: From: Gary Vogt Subject: TeamGrumman-List: instrument panel overlay liquidation I'm in the final steps of getting the instrument panel overlays FAA-PMA app roved as a direct replacement. -Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance. -That means the 20 sets I have left can't be used. Buy up as many as you want for $100/each including shipping. -That's abou t $50 savings on each one. -Stock them and sell them yourself. -Not sur e how much the PMAd parts will be. ________________________________ Message 5 _____________________________________ Time: 06:55:03 PM PST US From: Mel Beckman Subject: Re: TeamGrumman-List: instrument panel overlay liquidation Do I need a 337 to install one? What do they look like? (I'm an A&P but not f amiliar with these overlays). -mel via cell On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote: > I'm in the final steps of getting the instrument panel overlays FAA-PMA ap proved as a direct replacement. Problem is, the FAA requires they go out wi th a chem film plating (alodine) for corrosion resistance. That means the 2 0 sets I have left can't be used. > > Buy up as many as you want for $100/each including shipping. That's about $50 savings on each one. Stock them and sell them yourself. Not sure how m uch the PMAd parts will be. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 6 _____________________________________ Time: 06:55:03 PM PST US From: Mel Beckman Subject: Re: TeamGrumman-List: instrument panel overlay liquidation Do I need a 337 to install one? What do they look like? (I'm an A&P but not f amiliar with these overlays). -mel via cell On Aug 18, 2011, at 3:01 PM, Gary Vogt wrote: > I'm in the final steps of getting the instrument panel overlays FAA-PMA ap proved as a direct replacement. Problem is, the FAA requires they go out wi th a chem film plating (alodine) for corrosion resistance. That means the 2 0 sets I have left can't be used. > > Buy up as many as you want for $100/each including shipping. That's about $50 savings on each one. Stock them and sell them yourself. Not sure how m uch the PMAd parts will be. > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 7 _____________________________________ Time: 07:01:21 PM PST US From: matt drahz Subject: Re: TeamGrumman-List: instrument panel overlay liquidation As I was looking at my panel this week - with a F. Kokaska overlay - I thought to myself how happy I was to buy that years before I needed it - and how the one thing I would miss on my plane is that overlay should anything bad happen to the plane. This is my subtle way of encouraging you to pick up this overlay today. Don't wait. I may need to buy another just in case - its that cool. mattd / do not archive ** ________________________________ Message 8 _____________________________________ Time: 08:45:39 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: instrument panel overlay liquidation To all interested,=0A=0ASend a check for $100 (campaign contribution?) made payable to-=0A=0AGary L Vogt=0A2945 Bell Road #150=0AAuburn, CA -95603 =0A=0A=0A________________________________=0AFrom: Michael W. Meyer =0ATo: teamgrumman-list@matronics.com=0ASent: Thursday, Aug ust 18, 2011 3:11 PM=0ASubject: Re: TeamGrumman-List: instrument panel over lay liquidation=0A=0A=0AHi Gary,=0A=0AI'll take one.=0A=0A=0A=0A=0AThanks, =0AMichael=0A=0A=0AMichael W. Meyer=0A=0ATiger N74086=0ASan Francisco, CA =0A=0Amichael@flightsked.com =0A=0AOn Aug 18, 2011, at 3:01 PM, Gary Vogt w rote:=0A=0AI'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement. -Problem is, the FAA requires t hey go out with a chem film plating (alodine) for corrosion resistance. - That means the 20 sets I have left can't be used.=0A>=0A>=0A>Buy up as many as you want for $100/each including shipping. -That's about $50 savings on each one. -Stock them and sell them yourself. -Not sure how much the =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ________________________________ Message 9 _____________________________________ Time: 08:51:28 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: instrument panel overlay liquidation Overlays=0A=0A=0A________________________________=0AFrom: Brock Windsor =0ATo: teamgrumman-list@matronics.com=0ASent: Thursday, August 18, 2011 4:39 PM=0ASubject: Re: TeamGrumman-List: instrument panel overlay liquidation=0A=0A=0Awhat do they look like?=0A=0A--- On Thu, 8/18/1 1, Gary Vogt wrote:=0A=0A=0A>From: Gary Vogt =0A>Subject: TeamGrumman-List: instrument panel overlay li quidation=0A>To: "Teamgrumman List" =0A>Dat e: Thursday, August 18, 2011, 5:01 PM=0A>=0A>=0A>I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacem ent. -Problem is, the FAA requires they go out with a chem film plating ( alodine) for corrosion resistance. -That means the 20 sets I have left ca n't be used.=0A>=0A>=0A>Buy up as many as you want for $100/each including shipping. -That's about $50 savings on each one. -Stock them and sell t hem yourself. -Not sure how much the PMAd parts will be.=0A>st" rel=nof ollow target=_blank>http://www.matronics.com/Navigator?TeamGrumman-List =0Aet=_blank>http://forums.matronics.com=0Allow target=_blank>http://ww == ________________________________ Message 10 ____________________________________ Time: 08:51:53 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: instrument panel overlay liquidation It's an owner produced part.=0A=0A=0A________________________________=0AFro m: Mel Beckman =0ATo: "teamgrumman-list@matronics.com" =0ASent: Thursday, August 18, 2011 6:52 PM=0AS ubject: Re: TeamGrumman-List: instrument panel overlay liquidation=0A=0A=0A Do I need a 337 to install one? What do they look like? (I'm an A&P but not familiar with these overlays).-=0A=0A-mel via cell=0A=0AOn Aug 18, 2011, at 3:01 PM, Gary Vogt wrote:=0A=0A=0AI'm in the fi nal steps of getting the instrument panel overlays FAA-PMA approved as a di rect replacement. -Problem is, the FAA requires they go out with a chem f ilm plating (alodine) for corrosion resistance. -That means the 20 sets I have left can't be used.=0A>=0A>=0A>Buy up as many as you want for $100/ea ch including shipping. -That's about $50 savings on each one. -Stock th em and sell them yourself. -Not sure how much the PMAd parts will be.=0A_ -=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D ________________________________ Message 11 ____________________________________ Time: 09:03:47 PM PST US From: BILL9725@AOL.COM Subject: Re: TeamGrumman-List: instrument panel overlay liquidation Hi Gary Will have a check in the mail in the morning. Bill Stigile In a message dated 8/18/2011 8:54:29 P.M. Pacific Daylight Time, teamgrumman@yahoo.com writes: Overlays ____________________________________ From: Brock Windsor Sent: Thursday, August 18, 2011 4:39 PM Subject: Re: TeamGrumman-List: instrument panel overlay liquidation what do they look like? --- On Thu, 8/18/11, Gary Vogt wrote: From: Gary Vogt Subject: TeamGrumman-List: instrument panel overlay liquidation I'm in the final steps of getting the instrument panel overlays FAA-PMA approved as a direct replacement. Problem is, the FAA requires they go out with a chem film plating (alodine) for corrosion resistance. That means the 20 sets I have left can't be used. Buy up as many as you want for $100/each including shipping. That's about $50 savings on each one. Stock them and sell them yourself. Not sure how much the PMAd parts will be. st" rel=nofollow target=_blank>http://www.matronics.com/Navigator?TeamGrumman-List et=_blank>http://forums.matronics.com llow target=_blank>http://www.matronics.com/contribution http://www.matronics.follow" target="_blank" href="http://forums.matronics.com">http://forum========= ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.