Today's Message Index:
----------------------
1. 07:29 PM - outboard wing panel (Gary Vogt)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | outboard wing panel |
We got the wing panel off Saturday. -=0A=0ATotal (working) time from movi
ng the plane into the hangar, removing wing-tip, removing aileron and flap,
and until the outboard wing panel was placed on saw horses: 7.25-hours.
=0A=0AWing removed and packed into a crate to and ready to send to Fletcher
; another 3 hours.=0A=0ATIme bidded and charged the customer: 4 hours.=0A
=0AI'll see if all the pics will load. -If not, I'll post to the AuCountr
y Aviation Facebook page.=0A=0A-----------------=0A=0AOK. -It wouldn't po
st with 10 pics. -Here are two. -=0A=0AIt looked like the corrosion pai
nt ran into the gap between the spars. -It was really stuck.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|