---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sun 06/24/12: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:36 AM - AAiB parts for sale (Gary Vogt) 2. 06:03 PM - Spar diameter (Gary Vogt) 3. 06:03 PM - What's wrong with this picture? (Gary Vogt) 4. 06:30 PM - Re: What's wrong with this picture? (FLYaDIVE) 5. 06:30 PM - Re: Spar diameter (FLYaDIVE) 6. 07:41 PM - Re: What's wrong with this picture? (Gary Vogt) 7. 07:49 PM - Re: Spar diameter (Bob Hodo) 8. 08:06 PM - Re: Spar diameter (Gary Vogt) 9. 08:07 PM - Re: Spar diameter (Gary Vogt) 10. 08:11 PM - Re: Spar diameter (Gary Vogt) ________________________________ Message 1 _____________________________________ Time: 11:36:17 AM PST US From: Gary Vogt Subject: TeamGrumman-List: AAiB parts for sale Lots of parts. -Call or write if you're looking for something. ________________________________ Message 2 _____________________________________ Time: 06:03:45 PM PST US From: Gary Vogt Subject: TeamGrumman-List: Spar diameter What the diameter of the spar is at the wing attach point? ________________________________ Message 3 _____________________________________ Time: 06:03:45 PM PST US From: Gary Vogt Subject: TeamGrumman-List: What's wrong with this picture? ________________________________ Message 4 _____________________________________ Time: 06:30:07 PM PST US Subject: Re: TeamGrumman-List: What's wrong with this picture? From: FLYaDIVE Gee, could it be that the battery box is up-side down? Must have been one hell of a lot of turbulence. Barry On Sun, Jun 24, 2012 at 9:02 PM, Gary Vogt wrote: > ________________________________ Message 5 _____________________________________ Time: 06:30:48 PM PST US Subject: Re: TeamGrumman-List: Spar diameter From: FLYaDIVE Gary: I can give you that number tomorrow... From an AA5. Barry On Sun, Jun 24, 2012 at 9:03 PM, Gary Vogt wrote: > What the diameter of the spar is at the wing attach point? > > * > > * > > ________________________________ Message 6 _____________________________________ Time: 07:41:38 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: What's wrong with this picture? Right mag was timed at 20 and left mag was timed at 30. -I guess on the a verage it was 25.=0A=0A=0A________________________________=0A From: FLYaDIV E =0ATo: teamgrumman-list@matronics.com =0ASent: Sunday , June 24, 2012 6:28 PM=0ASubject: Re: TeamGrumman-List: What's wrong with this picture?=0A =0A=0AGee, could it be that the battery box is up-side dow n?=0A=0AMust have been one hell of a lot of-turbulence.=0A=0ABarry=0A=0A =0AOn Sun, Jun 24, 2012 at 9:02 PM, Gary Vogt wrote ===================== ________________________________ Message 7 _____________________________________ Time: 07:49:39 PM PST US From: Bob Hodo Subject: Re: TeamGrumman-List: Spar diameter Gary, it looked to be between 6.6" and 6.7" so I measured the circumference and got exactly 20.9 inches.- Divided by pi you get 6.65267662".- My c alipers only go to 6.25" so this measurement was done with a tape with mark ings in tenths of an inch instead of fractions.=0A=0AIf you like I can get the inside diameter with the calipers, then add the wall thickness twice, b ut I am thinking the above method is at least as accurate.=0A=0A=0AThat is the outer circumference of a cheetah center spar.- Since the wings on che etahs and tigers are interchangeable, the OD should be the same number.- =0A=0A=0ABob Hodo=0A=0A=0A________________________________=0A From: Gary Vo gt =0ATo: Teamgrumman List =0ASent: Sunday, June 24, 2012 8:03 PM=0ASubject: TeamGrumman-List: Spar diameter=0A =0A=0AWhat the diameter of the spar is at the wing attach ===================== ________________________________ Message 8 _____________________________________ Time: 08:06:32 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Spar diameter Barry, or ?=0A-=0AIf you have a wing, I need:=0A- -1. -the distance from the center of the spar to the leading edge of the airfoil. -=0A- -2. -the distance from the center of the spar to the aft edge of the af t spar (so, the end of the airfoil.) -That would give the overall length plus the spar location. -=0A- -3. -overall height at the widest par t of the airfoil=0A- -4. -approximate distance from the highest point to the center of the spar=0A- -5. -vertical location of the spar wit h respect to the bottom of the spar.=0A=0AIf you have a flap, I need:=0A- -1. -overall height and length of the flap.=0A- -2. -the distanc e from the center of the torque tube to the leading edge.=0A=0AIf you have an aileron, I need:-=0A- -1. -overall height and length of the aile ron.=0A- -2. -the distance from the center of the torque tube to the leading edge.=0A- -3. -approximate location of the beveled trailing e dge and its height and width.=0A=0AThanks in advance.=0AGary=0A=0A=0A=0A___ _____________________________=0A From: FLYaDIVE =0ATo: teamgrumman-list@matronics.com =0ASent: Sunday, June 24, 2012 6:30 PM=0ASub ject: Re: TeamGrumman-List: Spar diameter=0A =0A=0AGary:=0A=0AI can give yo u that number tomorrow... -From an AA5.=0A=0ABarry=0A=0A=0AOn Sun, Jun 24 , 2012 at 9:03 PM, Gary Vogt wrote:=0A=0AWhat the d iameter of the spar is at the wing attach point?=0A>st" target="_blank">h ttp://www.matronics.com/Navigator?TeamGrumman-List=0Atp://forums.matronics. ============ ________________________________ Message 9 _____________________________________ Time: 08:07:37 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Spar diameter Thanks. -I'll use 6.65 inches. -That is close enough for what I'm doing . -=0A=0AGary=0A=0A=0A________________________________=0A From: Bob Hodo =0ATo: "teamgrumman-list@matronics.com" =0ASent: Sunday, June 24, 2012 7:48 PM=0ASubject: Re: Tea mGrumman-List: Spar diameter=0A =0A=0AGary, it looked to be between 6.6" an d 6.7" so I measured the circumference and got exactly 20.9 inches.- Divi ded by pi you get 6.65267662".- My calipers only go to 6.25" so this meas urement was done with a tape with markings in tenths of an inch instead of fractions.=0A=0AIf you like I can get the inside diameter with the calipers , then add the wall thickness twice, but I am thinking the above method is at least as accurate.=0A=0A=0AThat is the outer circumference of a cheetah center spar.- Since the wings on cheetahs and tigers are interchangeable, the OD should be the same number.- =0A=0A=0ABob Hodo=0A=0A=0A___________ _____________________=0A From: Gary Vogt =0ATo: Team grumman List =0ASent: Sunday, June 24, 201 2 8:03 PM=0ASubject: TeamGrumman-List: Spar diameter=0A =0A=0AWhat the diam eter of the spar is at the wing attach point?=0Ah-======== ======================= ________________________________ Message 10 ____________________________________ Time: 08:11:24 PM PST US From: Gary Vogt Subject: Re: TeamGrumman-List: Spar diameter I'll use .300 as the wall thickness using a Tiger as a baseline.=0A=0ASo, i nside diameter is 6.05 inches. -Give or take.=0A=0A=0A___________________ _____________=0A From: Bob Hodo =0ATo: "teamgrumman-lis t@matronics.com" =0ASent: Sunday, June 24, 2012 7:48 PM=0ASubject: Re: TeamGrumman-List: Spar diameter=0A =0A=0AGary, it looked to be between 6.6" and 6.7" so I measured the circumference and got exactly 20.9 inches.- Divided by pi you get 6.65267662".- My calipe rs only go to 6.25" so this measurement was done with a tape with markings in tenths of an inch instead of fractions.=0A=0AIf you like I can get the i nside diameter with the calipers, then add the wall thickness twice, but I am thinking the above method is at least as accurate.=0A=0A=0AThat is the o uter circumference of a cheetah center spar.- Since the wings on cheetahs and tigers are interchangeable, the OD should be the same number.- =0A =0A=0ABob Hodo=0A=0A=0A________________________________=0A From: Gary Vogt =0ATo: Teamgrumman List =0ASent: Sunday, June 24, 2012 8:03 PM=0ASubject: TeamGrumman-List: Sp ar diameter=0A =0A=0AWhat the diameter of the spar is at the wing attach po int?=0Ah-====================== ========= ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.