Today's Message Index:
----------------------
1. 08:52 AM - Re: Jaguar Cowling update (BILL9725@AOL.COM)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Jaguar Cowling update |
Hi Gary
Thanks for the update. After we checked the clearance are you going to
put a heat shield on the Power Flow where it come close to the cowling? Also
wanted to mention that if there is any way, still would like the front fork
painted, even flat black works for me, but it is such a mess it needs your
TLC.
Thanks
Bill
In a message dated 12/2/2013 9:09:06 P.M. Pacific Standard Time,
teamgrumman@yahoo.com writes:
I spent Saturday and Sunday fine tuning the fit of the upper cowling and
drilling the 38 holes for the rivets and installing said rivets and then
filling the holes with filler and then block sanding the entire upper cowling.
Today I painted the primer on the inside and outside of the upper cowling.
First two coats: self etching primer; followed by 2 coats of an epoxy
filler primer. Tomorrow the inside gets painted white Imron. Prepping to
paint is a lot of work. Painting is easy. The only part I don't like is
cleaning the gun.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|