---------------------------------------------------------- TeamGrumman-List Digest Archive --- Total Messages Posted Sun 08/24/14: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:08 PM - Re: Sinking float (Gary L Vogt) 2. 02:11 PM - Re: Sinking float (Ian's) 3. 02:29 PM - Re: Sinking float (Claude Allen) 4. 06:31 PM - Re: Sinking float (Gary L Vogt) ________________________________ Message 1 _____________________________________ Time: 12:08:28 PM PST US From: Gary L Vogt Subject: Re: TeamGrumman-List: Sinking float these are the black floats. -all of them sink in fuel.=0A=0A=0AOn Saturda y, August 23, 2014 3:51 PM, Linn Walters wrote:=0A =0A=0A=0AInstall sight gauges? :-D =0AMake your own floats? :-D =0AGo back to the brass floats .... drill a hole and fill with foam.-=0A JB wel d over the hole.=0AOh, wait, you can only do that on experimentals.=0ASorry , I couldn't resist.=0ALinn=0APS- Are the floats the white nylon?- Whic h floats are they???=0A=0A=0AOn 8/23/2014 6:05 PM, Gary L Vogt wrote:=0A=0A Of the 3 fuel senders I have and don't work when installed, they all have f loats that won't float in fuel.=0A>=0A>=0A>I installed 2 overhauled sending units in a Traveler a couple of years ago and they don't work either. -I suspect the floats don't float on those either.=0A>=0A>=0A>Any suggestions ?=0A>=0A>=0A>Gary=0A>No virus found in this message.=0A>Checked by AVG - ww ________________________________ Message 2 _____________________________________ Time: 02:11:46 PM PST US Subject: Re: TeamGrumman-List: Sinking float From: "Ian's" What's Airparts of Lock Haven, the people who overhaul the senders, got to s ay about this. ? Ian Sent from my iPhone > On 24 Aug 2014, at 20:07, Gary L Vogt wrote: > > these are the black floats. all of them sink in fuel. > > > On Saturday, August 23, 2014 3:51 PM, Linn Walters wrote: > > > Install sight gauges? :-D > Make your own floats? :-D > Go back to the brass floats .... drill a hole and fill with foam. JB weld over the hole. > Oh, wait, you can only do that on experimentals. > Sorry, I couldn't resist. > Linn > PS Are the floats the white nylon? Which floats are they??? > > >> On 8/23/2014 6:05 PM, Gary L Vogt wrote: >> Of the 3 fuel senders I have and don't work when installed, they all have floats that won't float in fuel. >> >> I installed 2 overhauled sending units in a Traveler a couple of years ag o and they don't work either. I suspect the floats don't float on those eit her. >> >> Any suggestions? >> >> Gary >> >> >> >> No virus found in this message. >> Checked by AVG - www.avg.com >> 08/23/14 > > http://forums.matronics.com rel="nofollow" shape="rect" target="_bla nk" href="http://www.matro======= > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 3 _____________________________________ Time: 02:29:11 PM PST US Subject: Re: TeamGrumman-List: Sinking float From: Claude Allen I found a set of flouts a number of years ago that work at West Marine. (Boa t parts) Stuck them on there and they worked fine. Did not figure the FAA wa s gonna take my senders out to see if thay were PMAed. They looked just like the ones I took off. I think I paid 5 bucks for the pair. Sent from my iPhone > On Aug 24, 2014, at 5:11 PM, "Ian's" wrote: > > What's Airparts of Lock Haven, the people who overhaul the senders, got to say about this. ? > > Ian > > Sent from my iPhone > >> On 24 Aug 2014, at 20:07, Gary L Vogt wrote: >> >> these are the black floats. all of them sink in fuel. >> >> >> On Saturday, August 23, 2014 3:51 PM, Linn Walters wrote: >> >> >> Install sight gauges? :-D >> Make your own floats? :-D >> Go back to the brass floats .... drill a hole and fill with foam. JB wel d over the hole. >> Oh, wait, you can only do that on experimentals. >> Sorry, I couldn't resist. >> Linn >> PS Are the floats the white nylon? Which floats are they??? >> >> >>> On 8/23/2014 6:05 PM, Gary L Vogt wrote: >>> Of the 3 fuel senders I have and don't work when installed, they all hav e floats that won't float in fuel. >>> >>> I installed 2 overhauled sending units in a Traveler a couple of years a go and they don't work either. I suspect the floats don't float on those ei ther. >>> >>> Any suggestions? >>> >>> Gary >>> >>> >>> >>> No virus found in this message. >>> Checked by AVG - www.avg.com >>> 08/23/14 >> >> http://forums.matronics.com rel="nofollow" shape="rect" target="_bl ank" href="http://www.matro======= >> >> >> >> >> >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> rumman-List"">http://www.matronics.com/Navigator?TeamGrumman-List >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> //forums.matronics.com >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> ot;">http://www.matronics.com/contribution >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D >> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3 D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > ________________________________ Message 4 _____________________________________ Time: 06:31:22 PM PST US From: Gary L Vogt Subject: Re: TeamGrumman-List: Sinking float Haven't talked to them yet. -I was planning on going through Garner.=0A =0A=0AOn Sunday, August 24, 2014 2:39 PM, Claude Allen wrote:=0A =0A=0A=0AI found a set of flouts a number of years ago that w ork at West Marine. (Boat parts) Stuck them on there and they worked fine. Did not figure the FAA was gonna take my senders out to see if thay were PM Aed. They looked just like the ones I took off. I think I paid 5 bucks for the pair.=0A=0ASent from my iPhone=0A=0AOn Aug 24, 2014, at 5:11 PM, "Ian's " wrote:=0A=0A=0AWhat's Airparts of Lock Haven, the people who overhaul the senders, got to say about this. ?=0A=0AIan=0A=0ASen t from my iPhone=0A=0AOn 24 Aug 2014, at 20:07, Gary L Vogt wrote:=0A=0A=0Athese are the black floats. -all of them sink in fuel.=0A>=0A>=0A>=0A>On Saturday, August 23, 2014 3:51 PM, Linn Walters wrote:=0A> =0A>=0A>=0A>Install sight gauges? :-D =0A>M ake your own floats? :-D =0A>Go back to the brass floats .... drill a hole and fill with foam.-=0A JB weld over the hole.=0A>Oh, wait, you can only do that on experimentals.=0A>Sorry, I couldn't resist.=0A>Linn=0A>PS - Are the floats the white nylon?- Which floats are they???=0A>=0A>=0A> On 8/23/2014 6:05 PM, Gary L Vogt wrote:=0A>=0A>Of the 3 fuel senders I hav e and don't work when installed, they all have floats that won't float in f uel.=0A>>=0A>>=0A>>I installed 2 overhauled sending units in a Traveler a c ouple of years ago and they don't work either. -I suspect the floats don' t float on those either.=0A>>=0A>>=0A>>Any suggestions?=0A>>=0A>>=0A>>Gary =0A>>No virus found in this message.=0A>>Checked by AVG - www.avg.com=0A>>0 8/23/14=0A>=0A>http://forums.matronics.com rel="nofollow" shape="rect" target="_blank" href="http://www.matro======== =0A>=0A> =0A>D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=0Arumman-List"">http://www.matronics.com/Navigator?TeamGrumman-List D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =0A//forums.matronics.com D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=0Aot;">http://www.matronics.com/contribution D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =0AD=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=0Arumman-List"">http://www.matronics.com/Navigator?TeamGrumman-List =0AD=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=0A//forums.matronics.com=0AD=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=0Aot;">http://www.matronics.com/contrib ution=0AD=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ===================== ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message teamgrumman-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/TeamGrumman-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/teamgrumman-list Browse Digests http://www.matronics.com/digest/teamgrumman-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.