---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Thu 01/16/03: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:30 AM - Who wanted a replacement face for their C90? (Dremgragen .) ________________________________ Message 1 _____________________________________ Time: 05:30:30 AM PST US From: "Dremgragen ." Subject: XDP4000X-List: Who wanted a replacement face for their C90? --> XDP4000X-List message posted by: "Dremgragen ." I went to Sony parts and found the list of available pieces for the CDX-C90 http://servicesales.sel.sony.com/cgi-bin/service/showitems.cgi You'll have to decipher which of those is what you want... or just call 'em up and talk to a rep, they're pretty easy to deal with. I bought manuals for my C90 and 4000X through them. -Brody From: Randy Visentine Subject: XDP4000X-List: Anyone know of a tweet with a 500Hz resonance? -- XDP4000X-List message posted by: Randy Visentine Hello. I am frustrated with the crossover points on the XDP (Just like EVERYONE!). I want to get my soundstage up higher. Does anyone know of a tweeter that can handle a crossover point of 1KHz? This would require an f3 of around 500-800Hz. I would use the mid out set to 1K high-pass and bypass the low-pass slope. I would also have to ditch my rear-fill and use those channels to feed my front mids, but it would be worth it! I am also contemplating going to a true "Quad-Amped" front stage and add some 2" dome mids to come in at 500Hz on their own channels. I would want to make a pod to hold a mid and a tweet on my a-pillars. Anyone have any suggestions on some components that are small, stealthy, and a mid response of at least 500-5K. I am thinking even a good 3" cone driver will work for this application - as long as it is "stelthy". Thanks for any input... Randy Visentine Audio Engineer/Audiophile/Musician C90/4000X/7547/5026/BD1500.1