---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Sat 03/01/03: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:58 AM - Re: XDP4000X-List Digest: 5 Msgs - 02/28/03 (Freebird6512@aol.com) 2. 10:30 AM - Re: Re: XDP4000X-List Digest: 5 Msgs - 02/28/03 (Henry Faison) 3. 10:55 AM - 4K control (Henry Faison) 4. 11:03 AM - Re: 4K control (Matt Dralle) 5. 12:23 PM - Re: 4K control (NOTGSXR@aol.com) 6. 10:25 PM - Re: 4K control (owner-xdp4000x-list-server@matronics.com) ________________________________ Message 1 _____________________________________ Time: 08:58:56 AM PST US From: Freebird6512@aol.com Subject: XDP4000X-List: Re: XDP4000X-List Digest: 5 Msgs - 02/28/03 --> XDP4000X-List message posted by: Freebird6512@aol.com i have a major question- well 2 of them- i ve been on this list for a little bit but question #1 do i use regular rcs type to run all of my signal bacvk to the processor(myne is on order from a great source!) #2 how do i get on this e-mail forum, when i have switched screen names on aol? thanks for everyones time!!!! tim koehle toledo ohio ________________________________ Message 2 _____________________________________ Time: 10:30:45 AM PST US From: "Henry Faison" Subject: RE: XDP4000X-List: Re: XDP4000X-List Digest: 5 Msgs - 02/28/03 --> XDP4000X-List message posted by: "Henry Faison" How to I post to the list, Help. Thank you, Henry -----Original Message----- From: owner-xdp4000x-list-server@matronics.com [mailto:owner-xdp4000x-list-server@matronics.com]On Behalf Of Freebird6512@aol.com Subject: XDP4000X-List: Re: XDP4000X-List Digest: 5 Msgs - 02/28/03 --> XDP4000X-List message posted by: Freebird6512@aol.com i have a major question- well 2 of them- i ve been on this list for a little bit but question #1 do i use regular rcs type to run all of my signal bacvk to the processor(myne is on order from a great source!) #2 how do i get on this e-mail forum, when i have switched screen names on aol? thanks for everyones time!!!! tim koehle toledo ohio ________________________________ Message 3 _____________________________________ Time: 10:55:59 AM PST US From: "Henry Faison" Subject: XDP4000X-List: 4K control --> XDP4000X-List message posted by: "Henry Faison" Is anyone using the 4k control, if so how to you set the crossover points. Thank you, Henry ________________________________ Message 4 _____________________________________ Time: 11:03:36 AM PST US From: Matt Dralle Subject: Re: XDP4000X-List: 4K control --> XDP4000X-List message posted by: Matt Dralle At 10:55 AM 3/1/2003 Saturday, you wrote: >--> XDP4000X-List message posted by: "Henry Faison" > >Is anyone using the 4k control, if so how to you set the crossover points. >Thank you, Henry Hi Henry, 4kControl doesn't currently support Xover control, only EQ control. The next version will support Xover control, but development is currently on the back burner. Matt Dralle Matronics Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft There's three sides to every story, babe. There's your's; there's mine; and there's the cold, hard truth... Don Henley Long Way Home, 1982 ________________________________ Message 5 _____________________________________ Time: 12:23:25 PM PST US From: NOTGSXR@aol.com Subject: Re: XDP4000X-List: 4K control --> XDP4000X-List message posted by: NOTGSXR@aol.com In a message dated 3/1/03 2:04:10 PM Eastern Standard Time, dralle@matronics.com writes: > 4kControl doesn't currently support Xover control, only EQ control. The > next version will support Xover control, but development is currently on > the back burner. > > Matt Dralle > Matronics Matt, did i read somewhere where you were trying to change the Xover points also? Kind of "Reverse Engineer" the unit to see all possibilities..... If memory serves me you mentioned there could be something like 256 possibilities of Xover points or soemthing along those lines..... The # is probably off, but didn't you get into a little research about this? Thanks Dan ________________________________ Message 6 _____________________________________ Time: 10:25:25 PM PST US From: owner-xdp4000x-list-server@matronics.com Subject: Re: XDP4000X-List: 4K control --> XDP4000X-List message posted by: So is it posible to make the EQ settings through the 4kControl and the Xovers though the DSC? -Edu ----- Original Message ----- From: "Matt Dralle" Subject: Re: XDP4000X-List: 4K control --> XDP4000X-List message posted by: Matt Dralle At 10:55 AM 3/1/2003 Saturday, you wrote: >--> XDP4000X-List message posted by: "Henry Faison" > >Is anyone using the 4k control, if so how to you set the crossover points. >Thank you, Henry Hi Henry, 4kControl doesn't currently support Xover control, only EQ control. The next version will support Xover control, but development is currently on the back burner. Matt Dralle Matronics Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft There's three sides to every story, babe. There's your's; there's mine; and there's the cold, hard truth... Don Henley Long Way Home, 1982