---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Fri 04/25/03: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:22 AM - Re: New Software (Winkler.TV@t-online.de (winklerTV)) 2. 07:36 AM - Re: New Software (Roland M) 3. 08:32 AM - Sony DSC Software (Colin (DP Motorsport)) ________________________________ Message 1 _____________________________________ Time: 12:22:14 AM PST US From: Winkler.TV@t-online.de (winklerTV) Subject: Re: XDP4000X-List: New Software --> XDP4000X-List message posted by: Winkler.TV@t-online.de (winklerTV) Ive written a small windows app that is able to select the full range of crossover poinst the XDP-4000X RS232 Interface Protocol (THANKS MATT) seems to offer. But actually it does not work. You can select all the crossover points the DSC can but all other are ignored by the XDP. The processor stays in the last selected "valid" xo point. The app is rather limited because furhter developement seem to be nonsense. In its current state all slopes are hardcoded to 72 dB/oct and only the xo points of filter D, C and A can be adjusted, the app will not check for a connected XDP and only COM1 is supported. If you wand to try by yourself- send me a mail and ill send you the software via email. Sorry for this bad news. ________________________________ Message 2 _____________________________________ Time: 07:36:10 AM PST US From: "Roland M" Subject: Re: XDP4000X-List: New Software --> XDP4000X-List message posted by: "Roland M" >From: Hyo68@aol.com >Reply-To: xdp4000x-list@matronics.com >To: xdp4000x-list@matronics.com >Subject: Re: XDP4000X-List: New Software >Date: Wed, 23 Apr 2003 20:37:42 EDT > >--> XDP4000X-List message posted by: Hyo68@aol.com > >while we're at it, why not just design a way so that we can adjust these >things from our head unit!! Uhh, not to discourage, but that would require essentially re-engineering the whole HU or making one from scratch. "While you're at" doing that you might as well make a C95 or something and fix all the small flaws the C90 has... This is obviously a lot harder than it sounds! Roland M. ________________________________ Message 3 _____________________________________ Time: 08:32:52 AM PST US From: "Colin (DP Motorsport)" Subject: XDP4000X-List: Sony DSC Software --> XDP4000X-List message posted by: "Colin (DP Motorsport)" How professional is this software, i just used the 'Plot' feature and from a installers point of view how professional is the print out. I wish more of the stuff we installed had features like this, as if i was a customer and was given that print out after an install it would very good for customer satisfaction. Colin