---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Tue 04/29/03: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:04 PM - Re: XDP-4000X Tweeter crossover poll (Tom Beall) 2. 04:46 PM - Re: XDP-4000X Tweeter crossover poll (Randy Visentine) 3. 04:50 PM - Re: XDP-4000X Tweeter crossover poll (Sqxpert@aol.com) 4. 06:05 PM - Re: XDP-4000X Tweeter crossover poll (NOTGSXR@aol.com) 5. 06:39 PM - Re: XDP-4000X Tweeter crossover poll (Randy Visentine) 6. 08:47 PM - Re: XDP-4000X Tweeter crossover poll (NOTGSXR@aol.com) 7. 09:44 PM - Re: XDP-4000X Tweeter crossover poll (Randy Visentine) ________________________________ Message 1 _____________________________________ Time: 04:04:38 PM PST US From: "Tom Beall" Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: "Tom Beall" If you want to use horn-loaded compression drivers you would want a highpass as low as 500-800Hz with 24 to 72dB slope. I would like to see that kind of flexibility. I just finally sold all my USD processors from my old HLCD system. I would consider going back to HLCD's if the 4000x had crossover points in that range. ----- Original Message ----- From: "William Ko" Subject: XDP4000X-List: XDP-4000X Tweeter crossover poll > --> XDP4000X-List message posted by: "William Ko" > > > Hi guys and gals! Just wanted to take a quick poll to see where everyone has their tweeters crossed over at using their 4000X's, as well as the slopes. Thanks! > > > William Ko > > > From: "JACQUES CLAUDETTE" > To: > Subject: Re: XDP4000X-List: Sony DSC Software > Date: Mon, 28 Apr 2003 10:44:05 -0400 (Eastern Daylight Time) > > -- XDP4000X-List message posted by: "JACQUES CLAUDETTE" > > OK I WILL APPRECIATE .THK YOU =0D > =0D > -------Original Message-------=0D > =0D > From: xdp4000x-list@matronics.com=0D > Date: Sunday, April 27, 2003 09:35:55=0D > To: xdp4000x-list@matronics.com=0D > Subject: Re: XDP4000X-List: Sony DSC Software=0D > =0D > -- XDP4000X-List message posted by: "Christopher J. N. Kolaitis" > =0D > =0D > Hello,=0D > =0D > I can send you a copy via an email attachment, about an 8.10mb file.=0D > =0D > Let me know if that will work for you?=0D > =0D > Chris=0D > ----- Original Message -----=0D > From: JACQUES CLAUDETTE=0D > To: xdp4000x-list@matronics.com=0D > Subject: Re: XDP4000X-List: Sony DSC Software=0D > =0D > =0D > -- XDP4000X-List message posted by: "JACQUES CLAUDETTE" > =0D > =0D > I NEED TO HAVE A ORIGINAL SONY DSC SOFTWARE IT IS POSSIBLE TO HAVE=0D > ----- Original Message -----=0D > From: "Colin (DP Motorsport)" =0D > To: =0D > Subject: XDP4000X-List: Sony DSC Software=0D > =0D > =0D > -- XDP4000X-List message posted by: "Colin (DP Motorsport)"=0D > =0D > =0D > How professional is this software, i just used the 'Plot' feature and from=0D > a=0D > installers point of view how professional is the print out. I wish more of=0D > the stuff we installed had features like this, as if i was a customer and=0D > was given that print out after an install it would very good for customer=0D > satisfaction.=0D > =0D > Colin=0D > =0D > =0D > =0D > =0D > =0D > =2E > > ________________________________ Message 2 _____________________________________ Time: 04:46:36 PM PST US From: Randy Visentine Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: Randy Visentine You can use the 2nd mid out set to 500Hz @ 72dB with the "low pass" set to 0dB/octave (bypassed) and then you have a 500Hz high-pass. This will yeild the tweeter output useless (unless you bypass it and have use for a full range output for rear fill), but a 3 way system is still possible with 78Hz, and 500Hz points. I am looking for a small tweet that will go down to 1000Hz and use this same methood with 8.75" Vifa's in my doors from 78-1000Hz and the tweets on the A-Pillars from 1000Hz and up to raise the soundstage. For now, I am using the 4KHz crossover on the tweet channel with 6.5" quarts in the doors - BUT I plan on getting these 8.75" Vifa's installed as midbass/midrange so I will end up using the analog crossover on my Sony XM-7547 amp set to approx 2.5Khz. I really don't want to bypass such a nice feature on this processor, but the crossover point is as important as EQ and placement, so the analog X-Over processing is a worthwhile trade-off. These 8.75" Vifa's are the same ones out of the Mackie Studio Monitors and are critically acclaimed and are crossed-over at 2K in these reference monitors, so 2.5Khz is not much of a stretch. Finally incredible mid-bass I have missed since I used to have two 8" punch's in each door years and years ago. I will probaby venture into some kind of dome mid/tweeter A-Pillar pod and run a quad amp system with 78Hz, 500Hz, and 4KHz points. Enjoy... Randy Visentine C90/XDP4K + 2150Watts --- Tom Beall wrote: > --> XDP4000X-List message posted by: "Tom Beall" > > > If you want to use horn-loaded compression drivers > you would want a highpass > as low as 500-800Hz with 24 to 72dB slope. I would > like to see that kind of > flexibility. I just finally sold all my USD > processors from my old HLCD > system. I would consider going back to HLCD's if > the 4000x had crossover > points in that range. > > > ----- Original Message ----- > From: "William Ko" > To: > Subject: XDP4000X-List: XDP-4000X Tweeter crossover > poll > > > > --> XDP4000X-List message posted by: "William Ko" > > > > > > > Hi guys and gals! Just wanted to take a quick poll > to see where everyone > has their tweeters crossed over at using their > 4000X's, as well as the > slopes. Thanks! > > > > > > William Ko > > > > > > From: "JACQUES CLAUDETTE" > > > To: > > Subject: Re: XDP4000X-List: Sony DSC Software > > Date: Mon, 28 Apr 2003 10:44:05 -0400 (Eastern > Daylight Time) > > > > -- XDP4000X-List message posted by: "JACQUES > CLAUDETTE" > > > > > OK I WILL APPRECIATE .THK YOU =0D > > =0D > > -------Original Message-------=0D > > =0D > > From: xdp4000x-list@matronics.com=0D > > Date: Sunday, April 27, 2003 09:35:55=0D > > To: xdp4000x-list@matronics.com=0D > > Subject: Re: XDP4000X-List: Sony DSC Software=0D > > =0D > > -- XDP4000X-List message posted by: "Christopher > J. N. Kolaitis" > > =0D > > =0D > > Hello,=0D > > =0D > > I can send you a copy via an email attachment, > about an 8.10mb file.=0D > > =0D > > Let me know if that will work for you?=0D > > =0D > > Chris=0D > > ----- Original Message -----=0D > > From: JACQUES CLAUDETTE=0D > > To: xdp4000x-list@matronics.com=0D > > Subject: Re: XDP4000X-List: Sony DSC Software=0D > > =0D > > =0D > > -- XDP4000X-List message posted by: "JACQUES > CLAUDETTE" > > =0D > > =0D > > I NEED TO HAVE A ORIGINAL SONY DSC SOFTWARE IT IS > POSSIBLE TO HAVE=0D > > ----- Original Message -----=0D > > From: "Colin (DP Motorsport)" > =0D > > To: =0D > > Subject: XDP4000X-List: Sony DSC Software=0D > > =0D > > =0D > > -- XDP4000X-List message posted by: "Colin (DP > Motorsport)"=0D > > =0D > > =0D > > How professional is this software, i just used > the 'Plot' feature and > from=0D > > a=0D > > installers point of view how professional is the > print out. I wish more > of=0D > > the stuff we installed had features like this, > as if i was a customer > and=0D > > was given that print out after an install it > would very good for > customer=0D > > satisfaction.=0D > > =0D > > Colin=0D > > =0D > > =0D > > =0D > > =0D > > =0D > > =2E > > > > > > > > http://www.matronics.com/archives > > __________________________________ http://search.yahoo.com ________________________________ Message 3 _____________________________________ Time: 04:50:52 PM PST US From: Sqxpert@aol.com Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: Sqxpert@aol.com im getting ready to wire my system, do you guys know what rca out puts are for high pass, and whitch ones are for lowpass? thanks tim 419-514-5837 ________________________________ Message 4 _____________________________________ Time: 06:05:09 PM PST US From: NOTGSXR@aol.com Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: NOTGSXR@aol.com In a message dated 4/29/03 7:47:17 PM Eastern Daylight Time, jvisentine@yahoo.com writes: > I will probaby venture into some kind of dome > mid/tweeter A-Pillar pod and run a quad amp system > with 78Hz, 500Hz, and 4KHz points. This is almost exactly what i am doing. Right now, i have the tweets at 4k. Midbass at 500hz and midrange um.... somewhere in between (can't remember now). Focal speakers, old school A/D/S amps...... and a MMATS D300HC for sub amp.... Also looking for a nice set of 8's that will go up to 500hz.....need lots of time to play :) Dan ________________________________ Message 5 _____________________________________ Time: 06:39:58 PM PST US From: Randy Visentine Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: Randy Visentine Dynaudio, Vifa, and Morel make some FINE woofers that play to 2K and up. Like I said, the 8.75" Vifa woofers I have roll off at 2.5K and are designed specifically for a studio reference 2-way monitor that retails for $1500 a pair. And they are 4 Ohm and I picked up a pair on closeout for $70.00 brand new! What kind of mids are you running - domes or cones? I am looking for something really small for an A-pillar pod with a response from 500Hz to 4KHz. Later... Randy Visentine C90/XDP4K + 2150 Watts --- NOTGSXR@aol.com wrote: > --> XDP4000X-List message posted by: NOTGSXR@aol.com > > In a message dated 4/29/03 7:47:17 PM Eastern > Daylight Time, > jvisentine@yahoo.com writes: > > > I will probaby venture into some kind of dome > > mid/tweeter A-Pillar pod and run a quad amp system > > with 78Hz, 500Hz, and 4KHz points. > > > This is almost exactly what i am doing. Right now, > i have the tweets at 4k. > Midbass at 500hz and midrange um.... somewhere in > between (can't remember > now). Focal speakers, old school A/D/S amps...... > and a MMATS D300HC for sub > amp.... Also looking for a nice set of 8's that > will go up to 500hz.....need > lots of time to play :) > > Dan > > > > http://www.matronics.com/archives > > __________________________________ http://search.yahoo.com ________________________________ Message 6 _____________________________________ Time: 08:47:02 PM PST US From: NOTGSXR@aol.com Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: NOTGSXR@aol.com In a message dated 4/29/03 9:40:35 PM Eastern Daylight Time, jvisentine@yahoo.com writes: > Dynaudio, Vifa, and Morel make some FINE woofers that > play to 2K and up. Like I said, the 8.75" Vifa > woofers I have roll off at 2.5K and are designed > specifically for a studio reference 2-way monitor that > retails for $1500 a pair. And they are 4 Ohm and I > picked up a pair on closeout for $70.00 brand new! > > What kind of mids are you running - domes or cones? I > am looking for something really small for an A-pillar > pod with a response from 500Hz to 4KHz. > > Later... > Randy Visentine > C90/XDP4K + 2150 Watts > Right now, i have my Focal Mistral 165EX 3 way set. The midrange is a 4" driver. Not at all small. I upgradted the tweets to the TN-51's from the Utopia line before i ever installed them. Much better tweet. I am planning on an 8" midbass, the Focal Audiom 6W midrange and the TN-51 tweets. Could you get me a pair of those 8's? :) Thanks Dan ________________________________ Message 7 _____________________________________ Time: 09:44:00 PM PST US From: Randy Visentine Subject: Re: XDP4000X-List: XDP-4000X Tweeter crossover poll --> XDP4000X-List message posted by: Randy Visentine Dan, I got these on eBay earlier this month. I have yet to install them, as I need to fabricate new door panels first. I just searched for them again, and there were none offered. I sent the seller an e-mail. He showed to have 10 on auction, and I was the only bidder, so he should theoretically have 8 left. These are used in the Mackie HR-824 monitors. The VIFA # is: 490-001-00 They are actually 8.75" OD and 4 Ohm. I think Fs is like 29Hz! 1.5" VC and poly cone w/rubber surround. Magnesium cast frame and made in Denmark. If the seller responds, I will let you know the deal. Later, Randy V. C90+XDP4K & 2150Watts --- NOTGSXR@aol.com wrote: > --> XDP4000X-List message posted by: NOTGSXR@aol.com > > In a message dated 4/29/03 9:40:35 PM Eastern > Daylight Time, > jvisentine@yahoo.com writes: > > > Dynaudio, Vifa, and Morel make some FINE woofers > that > > play to 2K and up. Like I said, the 8.75" Vifa > > woofers I have roll off at 2.5K and are designed > > specifically for a studio reference 2-way monitor > that > > retails for $1500 a pair. And they are 4 Ohm and > I > > picked up a pair on closeout for $70.00 brand new! > > > > What kind of mids are you running - domes or > cones? I > > am looking for something really small for an > A-pillar > > pod with a response from 500Hz to 4KHz. > > > > Later... > > Randy Visentine > > C90/XDP4K + 2150 Watts > > > > > Right now, i have my Focal Mistral 165EX 3 way set. > The midrange is a 4" > driver. Not at all small. I upgradted the tweets > to the TN-51's from the > Utopia line before i ever installed them. Much > better tweet. I am planning > on an 8" midbass, the Focal Audiom 6W midrange and > the TN-51 tweets. Could > you get me a pair of those 8's? :) > > Thanks > > Dan > > > > http://www.matronics.com/archives > > __________________________________ http://search.yahoo.com