Today's Message Index:
----------------------
1. 12:17 AM - Re: Question about sony changers (Randy Visentine)
2. 12:23 AM - Re: Question about sony changers (Hyo68@aol.com)
3. 12:41 AM - Re: Question about sony changers (Randy Visentine)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question about sony changers |
--> XDP4000X-List message posted by: Randy Visentine <jvisentine@yahoo.com>
True,
You won't need to use the XA-C30 adaptor for the audio
lines if you have 1 analog and 1 digital, but the
Unilink buss will still need an XA-C30 or simular to
recognize and plug up the 2 unilink changers and in
order for the HU to recognize them as 2 distinct
changers (CD2 and CD3).
This is how I currently have my stsem configured, with
a CDX-805 running analog to the XDP's RCA changer in,
a CDX-828 running Optical in to the XDP's changer in,
and both changer's Unilink's go through the XA-C30
then to the XDP's changer Unilink port. I actually
ran the 805's analog RCA's through the XA-C30 in case
I add another analog Unilink device (so I won't have
to re-wire later if I add an XT-40 or 757MX MP3
changer).
The "y" adaptor would work for 2 analog changers
AUDIO, but you STILL NEED something to handle the
Unilink switching (like the XA-C30 which already has
analog RCA switching built in).
To be completely honest, I can't tell a difference
between the 805's analog interface and the 828's
optical interface. They are both very clean. The
XDP's A/D converters are top notch and the ES CD
changers have pretty good D/A converters as well.
Later,
Randy Visentine
Audiophile/Musician/Crazy Guy
C90/XDP4K
C910/XDP210EQ
--- NOTGSXR@aol.com wrote:
> --> XDP4000X-List message posted by: NOTGSXR@aol.com
>
> In a message dated 6/4/03 6:38:05 PM Eastern
> Daylight Time,
> mdx400@hotmail.com writes:
>
> > As for connecting more than
> > one changer to UniLink you have to have an XA-U20,
> XA-U40 (older models) or
> > XA-C30 (current model) Multi-Changer Adapter to
> connect more than one
> > changer via UniLink...
> >
> > Roland M.
> >
>
>
> If you have either an XDP-210EQ, XDP-U50D, or
> XDP-4000X can you not connect
> one analog changer as well as one digital? I could
> be wrong, but i thought you
> could and you wouldn't need the adapter....
>
> Dan
>
__________________________________
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question about sony changers |
--> XDP4000X-List message posted by: Hyo68@aol.com
a little off topic, but close...Is it possible to run a portable mp3 player
straight in the analog input for the changer while having a changer hooked up
to the digital? Or do you need something else?
In a message dated 6/5/2003 12:17:41 AM Pacific Daylight Time,
jvisentine@yahoo.com writes:
>
> --> XDP4000X-List message posted by: Randy Visentine <jvisentine@yahoo.com>
>
> True,
>
> You won't need to use the XA-C30 adaptor for the audio
> lines if you have 1 analog and 1 digital, but the
> Unilink buss will still need an XA-C30 or simular to
> recognize and plug up the 2 unilink changers and in
> order for the HU to recognize them as 2 distinct
> changers (CD2 and CD3).
>
> This is how I currently have my stsem configured, with
> a CDX-805 running analog to the XDP's RCA changer in,
> a CDX-828 running Optical in to the XDP's changer in,
> and both changer's Unilink's go through the XA-C30
> then to the XDP's changer Unilink port. I actually
> ran the 805's analog RCA's through the XA-C30 in case
> I add another analog Unilink device (so I won't have
> to re-wire later if I add an XT-40 or 757MX MP3
> changer).
>
> The "y" adaptor would work for 2 analog changers
> AUDIO, but you STILL NEED something to handle the
> Unilink switching (like the XA-C30 which already has
> analog RCA switching built in).
>
> To be completely honest, I can't tell a difference
> between the 805's analog interface and the 828's
> optical interface. They are both very clean. The
> XDP's A/D converters are top notch and the ES CD
> changers have pretty good D/A converters as well.
>
> Later,
>
> Randy Visentine
> Audiophile/Musician/Crazy Guy
> C90/XDP4K
> C910/XDP210EQ
>
> --- NOTGSXR@aol.com wrote:
> >--> XDP4000X-List message posted by: NOTGSXR@aol.com
> >
> >In a message dated 6/4/03 6:38:05 PM Eastern
> >Daylight Time,
> >mdx400@hotmail.com writes:
> >
> >>As for connecting more than
> >>one changer to UniLink you have to have an XA-U20,
> >XA-U40 (older models) or
> >>XA-C30 (current model) Multi-Changer Adapter to
> >connect more than one
> >>changer via UniLink...
> >>
> >>Roland M.
> >>
> >
> >
> >If you have either an XDP-210EQ, XDP-U50D, or
> >XDP-4000X can you not connect
> >one analog changer as well as one digital? I could
> >be wrong, but i thought you
> >could and you wouldn't need the adapter....
> >
> >Dan
> >
>
>
> __________________________________
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Question about sony changers |
--> XDP4000X-List message posted by: Randy Visentine <jvisentine@yahoo.com>
You will still need the Unilink "Aux Input Adaptor".
I forgot the #, but it is something like XXX 300b or
something. It is a current model ans even includes
1/8" TRS stereo ins as well as a USB in for a laptop!
Runs like $99. The analog input will be seen as
another changer (CD3) or an MD changer (MD1), but will
simply switch to the analog input without physically
controlling any Unilink devices.
If you try to hook up the MP3 to the analog input, the
XDP will ALWAYS default to the digital Toslink input
if it is "on" and the carrier sync is present (anytime
the changer is selected, the laser turns on and the
carrier signal is present). You could disconnect the
optical input from the changer (while leaving the
Unilink connected), and then the analog ins would
accept the analog MP3 player as long as the CD changer
is currently selected and still playing. This would
mean un-connecting the Toslink everytime you want to
select your MP3 and re-connecting the Toslink to go
back to the CD changer.
Later
Randy V.
--- Hyo68@aol.com wrote:
> --> XDP4000X-List message posted by: Hyo68@aol.com
>
> a little off topic, but close...Is it possible to
> run a portable mp3 player
> straight in the analog input for the changer while
> having a changer hooked up
> to the digital? Or do you need something else?
>
> In a message dated 6/5/2003 12:17:41 AM Pacific
> Daylight Time,
> jvisentine@yahoo.com writes:
>
> >
> > --> XDP4000X-List message posted by: Randy
> Visentine <jvisentine@yahoo.com>
> >
> > True,
> >
> > You won't need to use the XA-C30 adaptor for the
> audio
> > lines if you have 1 analog and 1 digital, but the
> > Unilink buss will still need an XA-C30 or simular
> to
> > recognize and plug up the 2 unilink changers and
> in
> > order for the HU to recognize them as 2 distinct
> > changers (CD2 and CD3).
> >
> > This is how I currently have my stsem configured,
> with
> > a CDX-805 running analog to the XDP's RCA changer
> in,
> > a CDX-828 running Optical in to the XDP's changer
> in,
> > and both changer's Unilink's go through the XA-C30
> > then to the XDP's changer Unilink port. I
> actually
> > ran the 805's analog RCA's through the XA-C30 in
> case
> > I add another analog Unilink device (so I won't
> have
> > to re-wire later if I add an XT-40 or 757MX MP3
> > changer).
> >
> > The "y" adaptor would work for 2 analog changers
> > AUDIO, but you STILL NEED something to handle the
> > Unilink switching (like the XA-C30 which already
> has
> > analog RCA switching built in).
> >
> > To be completely honest, I can't tell a difference
> > between the 805's analog interface and the 828's
> > optical interface. They are both very clean. The
> > XDP's A/D converters are top notch and the ES CD
> > changers have pretty good D/A converters as well.
> >
> > Later,
> >
> > Randy Visentine
> > Audiophile/Musician/Crazy Guy
> > C90/XDP4K
> > C910/XDP210EQ
> >
> > --- NOTGSXR@aol.com wrote:
> > >--> XDP4000X-List message posted by:
> NOTGSXR@aol.com
> > >
> > >In a message dated 6/4/03 6:38:05 PM Eastern
> > >Daylight Time,
> > >mdx400@hotmail.com writes:
> > >
> > >>As for connecting more than
> > >>one changer to UniLink you have to have an
> XA-U20,
> > >XA-U40 (older models) or
> > >>XA-C30 (current model) Multi-Changer Adapter to
> > >connect more than one
> > >>changer via UniLink...
> > >>
> > >>Roland M.
> > >>
> > >
> > >
> > >If you have either an XDP-210EQ, XDP-U50D, or
> > >XDP-4000X can you not connect
> > >one analog changer as well as one digital? I
> could
> > >be wrong, but i thought you
> > >could and you wouldn't need the adapter....
> > >
> > >Dan
> > >
> >
> >
> > __________________________________
> >
> >
>
>
>
>
> http://www.matronics.com/archives
>
>
__________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|