Today's Message Index:
----------------------
1. 10:37 AM - XA-D211 or XA-D210 and.......... (NOTGSXR@aol.com)
2. 11:42 AM - Anyne have a dead C90 rotary controller (joystick)? (Mike Piccin)
3. 05:27 PM - Re: Anyne have a dead C90 rotary controller (joystick)? (David Kennedy)
4. 07:19 PM - Re: Anyne have a dead C90 rotary controller (joystick)? (Roland M)
5. 07:35 PM - Re: XA-D211 or XA-D210 and.......... (Roland M)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | XA-D211 or XA-D210 and.......... |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
Does anyone know where i can get one of these? Also, any wireless remote
that goes with the C910..... thanks.......
Also, while i know alot of you guys are audiophile types.... whats a great
midrange that can go somewhere form 400 to 4k...... I have already an older
Focal 4k and ordered a pair of Vifa PL 4.5"..... i have looked at the CDT
eurosports and they are intriguing..... also, there is a new Morel speker that
has my
interest..
http://www.morelusa.com/renaissance/wr-4.htm
I am going with a Ribbon Tweeter.......... oh, and a 4 way setup up
front..... 8, 6 1/2 (or 165mm), 4-4 1/2, and tweet........
any info would be appreciated....
Thanks...
Dan
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Anyne have a dead C90 rotary controller (joystick)? |
--> XDP4000X-List message posted by: "Mike Piccin" <mpiccin2@hotmail.com>
I would like to try and hok up my steering wheel contorls, howver, to make
them work I need the plug for the rotary controller (i.e. joystick). Does
anyone have a plug for the joystick they are ready to throw out or is not in
need of? ... or anyone know where I can get just the plug?
Please email me at mpiccin2@hotmail.com and let me know.
Thanks, Mike
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Anyne have a dead C90 rotary controller (joystick)? |
--> XDP4000X-List message posted by: "David Kennedy" <dkenned1@hotmail.com>
Good luck finding this plug, someone in the forum gave me the mfgr's number
and they'll only sell qty of 10000 or more :(
I just went into the C-90 and de-soldered the plug and soldered my own wires
on. (I had lost the rotary remote plug after cutting it off!)
Just cut the cable! If you cant get the steering wheel controls working then
re-splice the cable together w/ RJ 45 cable ends & connectors that are used
for Ethernet wiring, or terminal strips from radio shack w/ the screws on
them & then tape it up or put it in a project box.
David Kennedy
-----Original Message-----
From: owner-xdp4000x-list-server@matronics.com
[mailto:owner-xdp4000x-list-server@matronics.com] On Behalf Of Mike Piccin
Subject: XDP4000X-List: Anyne have a dead C90 rotary controller (joystick)?
--> XDP4000X-List message posted by: "Mike Piccin" <mpiccin2@hotmail.com>
I would like to try and hok up my steering wheel contorls, howver, to make
them work I need the plug for the rotary controller (i.e. joystick). Does
anyone have a plug for the joystick they are ready to throw out or is not in
need of? ... or anyone know where I can get just the plug?
Please email me at mpiccin2@hotmail.com and let me know.
Thanks, Mike
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Anyne have a dead C90 rotary controller (joystick)? |
--> XDP4000X-List message posted by: "Roland M" <mdx400@hotmail.com>
>--> XDP4000X-List message posted by: "Mike Piccin" <mpiccin2@hotmail.com>
>
>I would like to try and hok up my steering wheel contorls, howver, to make
>them work I need the plug for the rotary controller (i.e. joystick). Does
>anyone have a plug for the joystick they are ready to throw out or is not
>in
>need of? ... or anyone know where I can get just the plug?
>
>Please email me at mpiccin2@hotmail.com and let me know.
>
>Thanks, Mike
I agree with David... While you might somehow be able to find a broken C90
remote somewhere the probability is not that high I don't think... It would
be far easier just to splice into the existing remote wires--I'm assuming
you have the original wired remote though, is that correct? It won't ruin
the remote if you just splice in. In fact if you cut the cord entirely it
wouldn't ruin the remote--it could always be re-attached afterwards. I'd
give a try to splicing into the wire though, you may be able to then utilise
both the C90 wired remote and the steering wheel controls...
Roland M.
overload! http://click.atdmt.com/AVE/go/onm00200362ave/direct/01/
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | XA-D211 or XA-D210 and.......... |
--> XDP4000X-List message posted by: "Roland M" <mdx400@hotmail.com>
>--> XDP4000X-List message posted by: NOTGSXR@aol.com
>
>Does anyone know where i can get one of these? Also, any wireless remote
>that goes with the C910..... thanks.......
>
>any info would be appreciated....
>
>Thanks...
>
>Dan
>
Well I was gonna say Sony DAPC (
http://servicesales.sel.sony.com/web/index.jsp ) for getting the D211
adapter in the US but apparently they don't have them in stock right now! :(
I wonder if that is it for the adapter, as in they might not re-stock
them?! You could call them/email them and ask them if they will be getting
more of them.
Otherwise try Partsolver (www.partsolver.com), Tritronics
(www.tritronicsinc.com), or a local Sony parts dealer to see if any of them
have it in stock.
Other than that there is eBay... However unfortunately on eBay usually they
are bundled with either a C90, C910 or XDP unit that someone is selling;
though you might be able to get the seller to sell it to you separately.
You could also check out the classifieds on places like SoundDomain (careful
who you're buying from on SD though, a lot of scams seem to go on there so
make sure you buy from someone reputable if you find one there)...
As for the wireless remote any of the RM-X40, X41, X47 will work fine (they
are all pretty much the same exact remote with only VERY subtle
differences). Its funny because these older bulky remotes used to be on
eBay in numbers before but it seems now mostly the newer, thinner Xplod
variety remotes are available. In any case the older ones do still pop up
on eBay just not as cheap/plentiful as they used to be :(
Sony DAPC does sell the X47 remote but it is $30.00 from there.
The newer remotes made for the Xplod series will work with the older units
but the buttons on the cross-key control will NOT work. IIRC, "MENU" will
not work either. The new remotes actually have keys not on the older ones
that will work with the older units, like the "LIST" button though. So
you'll be able to use SOURCE, LIST, SOUND, MODE, ATT, VOL, and OFF; but the
other buttons won't work. The cross-key includes the track FWD/BACK and
REW/FWD keys as well as DISC +/-. Those keys will not work on the older
units, so if you used one of them you'd be unable to change tracks/stations.
The newer ones with the number buttons on them, those buttons won't do
anything either.
Also there are some wireless remotes that bear the mark "HiR" on them.
These will not work AT ALL with any unit that does not have HiR capability,
which includes any of the old school units (and even many of the new ones as
well). Some examples of the HiR remotes are the RM-X5S, X6S, X110, and
others.
Roland M.
Get some great ideas here for your sweetheart on Valentine's Day - and
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|