Today's Message Index:
----------------------
1. 02:28 AM - Re: ok guys.... what are your thoughts??? (Pete)
2. 02:45 AM - Re: ok guys.... what are your thoughts??? (Pete)
3. 05:17 AM - Re: ok guys.... what are your thoughts??? (NOTGSXR@aol.com)
4. 06:26 AM - CDX-C910 Volume issues (NOTGSXR@aol.com)
5. 07:06 AM - Re: ok guys.... what are your thoughts??? (Pete)
6. 05:11 PM - Re: CDX-C910 Volume issues (Roland M)
7. 05:53 PM - Re: CDX-C910 Volume issues (NOTGSXR@aol.com)
8. 05:58 PM - Re: CDX-C910 Volume issues (NOTGSXR@aol.com)
9. 07:49 PM - [PLEASE READ] Virus Laden Spam Purports To Be From Matronics... (dralle@matronics.com (Matt Dralle))
10. 08:45 PM - Re: CDX-C910 Volume issues (DB)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | ok guys.... what are your thoughts??? |
--> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
http://www.morelusa.com/renaissance/prestige/triumph/triumph.html - made
for one reason, to beat the supremos, it does too!
http://www.morelusa.com/renaissance/mr-56.htm - Fits the 500hz xdp
god choice 85hz-7khz! Don't confuse it with the DLS design, DLS tried to
copy it but the dls is rather poor in comparison.
http://www.morelusa.com/renaissance/wr-6.htm or (these look gay but they
are awesome ... http://www.morelusa.com/renaissance/wr-8.htm
The above actually match the sony crossover limitations very well. The
are big however!
Just some ideas into the pot :)
-----Original Message-----
From: owner-xdp4000x-list-server@matronics.com
[mailto:owner-xdp4000x-list-server@matronics.com] On Behalf Of One Park
Subject: RE: XDP4000X-List: ok guys.... what are your thoughts???
--> XDP4000X-List message posted by: "One Park" <paikiah@hotmail.com>
>2 A/D/S P4100 amps.... 100 watts to each driver
>
>2 Neo3Pdr Tweets
>
>2 DLS Iridium 3" Soft Dome Midrange
>
>2 Focal 6k 4402 drivers (from Mistral 165EX set)
>
>2 Vifa 8" OEM drivers (from Mackie studio monitors)
>
>
>Is that TOO much of a front stage???? One of these days i'll finish
it.....
>have most of it... rest is otw.....
>
>
>All Processed via Sony XDP-4000X
>
>First crossover thoughts.......
>
>Tweets 6.3k up
>Iridium 3's 500hz to 6.3k
>Focal 6k's 200hz to 500hz
>Vifa 8's from 78hz to 200hz or 50hz to 200hz
>Sub (still Single Audiomobile MASS 2012, but contemplating Brahma 15")
>Sub Amp PPI PC 2600.2
>
>
>should be interesting... cannot wait to play
>
>Please share your thoughts...
>
>
>Dan
I think that's overkill... tweet, soft dome mids and a 6" should be more
than enough, if you ask me.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | ok guys.... what are your thoughts??? |
--> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
Quick EDIT: mr-56 is a good choice, the wr4 is the 85-7khz I was
referring too.
-----Original Message-----
From: owner-xdp4000x-list-server@matronics.com
[mailto:owner-xdp4000x-list-server@matronics.com] On Behalf Of Pete
Subject: RE: XDP4000X-List: ok guys.... what are your thoughts???
--> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
http://www.morelusa.com/renaissance/prestige/triumph/triumph.html - made
for one reason, to beat the supremos, it does too!
http://www.morelusa.com/renaissance/mr-56.htm - Fits the 500hz xdp
god choice 85hz-7khz! Don't confuse it with the DLS design, DLS tried to
copy it but the dls is rather poor in comparison.
http://www.morelusa.com/renaissance/wr-6.htm or (these look gay but they
are awesome ... http://www.morelusa.com/renaissance/wr-8.htm
The above actually match the sony crossover limitations very well. The
are big however!
Just some ideas into the pot :)
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: ok guys.... what are your thoughts??? |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
In a message dated 3/3/2004 5:27:54 AM Eastern Standard Time, dabrow@orange.net
writes:
> --> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
>
> http://www.morelusa.com/renaissance/prestige/triumph/triumph.html - made
> for one reason, to beat the supremos, it does too!
>
> http://www.morelusa.com/renaissance/mr-56.htm - Fits the 500hz xdp
> god choice 85hz-7khz! Don't confuse it with the DLS design, DLS tried to
> copy it but the dls is rather poor in comparison.
>
> http://www.morelusa.com/renaissance/wr-6.htm or (these look gay but they
> are awesome ... http://www.morelusa.com/renaissance/wr-8.htm
>
> The above actually match the sony crossover limitations
> very well. The
> are big however!
>
> Just some ideas into the pot :)
Actually7, i was looking at the WR-4 as well...... these all look to be great drivers
as well :) As far as DLS being a poor copy, tell that to Scott Buwalda......
The IASCA Expert world champ ;) The DLS speakers may indeed be a copy
but they seem to do the job well..... or so i've heard and read... :)
Dan
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | CDX-C910 Volume issues |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
Hey guys....... Sony actually got it right this time and sent me the rotary
encoder for my volume control.............. I soldered it on the board to the
faceplate, and to my surprise..... the same problem..... The volume has a mind
of its own, rotate the button and it goes up and down at its own
will............Any other ideas? Thanks in advance..
Dan
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | ok guys.... what are your thoughts??? |
--> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
Interesting you mention about Buwalda, according to his posts on
carsound morel Israel are the real Morel! Now this is clearly untrue
(that's after hours of digging around and a personal conclusion), it's
what DLS have told him to say ;) (wink). The chap (Meir) calling the
strings at Morel (IL) actually registered the morel logo while in a
position at more acoustics USA against there knowledge! It's a pretty
nasty feud as result. The Israel story does not hold up anywhere near as
well, it is no coincidence the real morel although deprived of the
trademark due to a legal argument have named there new products under
the name Renaissance! Quite fitting actually, when you find out the
facts.
Anyway the point being the morel acoustics USA drivers especially the
soft dome mid fit the crossover points of the XDP-4000x very well in a 3
way setup. The mr56 is there best mid they currently make, it also
features in a $64,000 home speaker, I forget the name. One problem
really is the size of the triumph tweeter, if you stack them on top of
each other they are taller than a coke can! But then at 250wrms and
housing triple stacked magnet its not surprising.
Other than that the rainbow 3 ways have always matched the xdp-4k, the
mid at 500hz on the pro and vandi is a good match. They also have a few
new lines out soon so bargains will be around.
-----Original Message-----
From: owner-xdp4000x-list-server@matronics.com
[mailto:owner-xdp4000x-list-server@matronics.com] On Behalf Of
NOTGSXR@aol.com
Subject: Re: XDP4000X-List: ok guys.... what are your thoughts???
--> XDP4000X-List message posted by: NOTGSXR@aol.com
In a message dated 3/3/2004 5:27:54 AM Eastern Standard Time,
dabrow@orange.net writes:
> --> XDP4000X-List message posted by: "Pete" <dabrow@orange.net>
>
> http://www.morelusa.com/renaissance/prestige/triumph/triumph.html -
made
> for one reason, to beat the supremos, it does too!
>
> http://www.morelusa.com/renaissance/mr-56.htm - Fits the 500hz xdp
> god choice 85hz-7khz! Don't confuse it with the DLS design, DLS tried
to
> copy it but the dls is rather poor in comparison.
>
> http://www.morelusa.com/renaissance/wr-6.htm or (these look gay but
they
> are awesome ... http://www.morelusa.com/renaissance/wr-8.htm
>
> The above actually match the sony crossover limitations
> very well. The
> are big however!
>
> Just some ideas into the pot :)
Actually7, i was looking at the WR-4 as well...... these all look to be
great drivers as well :) As far as DLS being a poor copy, tell that to
Scott Buwalda...... The IASCA Expert world champ ;) The DLS
speakers may indeed be a copy but they seem to do the job well..... or
so i've heard and read... :)
Dan
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | CDX-C910 Volume issues |
--> XDP4000X-List message posted by: "Roland M" <mdx400@hotmail.com>
>--> XDP4000X-List message posted by: NOTGSXR@aol.com
>
>Hey guys....... Sony actually got it right this time and sent me the rotary
>encoder for my volume control.............. I soldered it on the board to
>the
>faceplate, and to my surprise..... the same problem.....
>
>Dan
Hmm, very strange indeed! What about any other mechanicals or electronics
right near the volume control in the HU? If it is still doing that then
there might be a problem with the IC or electronics interpreting the
commands from the encoder, this could be either in the FP or in the HU
itself. Apart from having it professionally serviced I'm at a loss. If the
control and everything to do with that has been replaced, the problem would
probably lie elsewhere. I would have definitely thought it was just the
encoder that had gone bad, but perhaps not :(
I'm at a loss for what could be wrong. I'm thinking it has to be something
electronic then (and not mechanical) but I have no clue what it would be,
specifically.
Anyone else have ideas or know about the problem?
Roland M.
Find things fast with the new MSN Toolbar includes FREE pop-up blocking!
http://clk.atdmt.com/AVE/go/onm00200414ave/direct/01/
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: CDX-C910 Volume issues |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
In a message dated 3/3/04 8:12:17 PM Eastern Standard Time,
mdx400@hotmail.com writes:
Hmm, very strange indeed! What about any other mechanicals or electronics
right near the volume control in the HU? If it is still doing that then
there might be a problem with the IC or electronics interpreting the
commands from the encoder, this could be either in the FP or in the HU
itself. Apart from having it professionally serviced I'm at a loss. If the
control and everything to do with that has been replaced, the problem would
probably lie elsewhere. I would have definitely thought it was just the
encoder that had gone bad, but perhaps not :(
I'm at a loss for what could be wrong. I'm thinking it has to be something
electronic then (and not mechanical) but I have no clue what it would be,
specifically.
Anyone else have ideas or know about the problem?
Roland M.
I'm pretty sure it was the encoder..... Actually, the new one works worse
than the old one... I ended up putting the old one back in..... It must be
somehow related to the encoder versus the rest of the face plate as the remote
works fine. Actually, after inserting the old encoder back, it seems to be
working better than it has in a long long time... I'm going to "baby" it and
perhaps somehow removing it and putting it back in worked??? I'm at a loss here
really....... so i dunno.......... lol I'm just keeping my fingers
crossed....
Thanks......
Dan
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: CDX-C910 Volume issues |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
In a message dated 3/3/04 8:55:59 PM Eastern Standard Time, NOTGSXR@aol.com
writes:
I'm pretty sure it was the encoder..... Actually, the new one works worse
than the old one... I ended up putting the old one back in..... It must be
somehow related to the encoder versus the rest of the face plate as the
remote
works fine. Actually, after inserting the old encoder back, it seems to be
working better than it has in a long long time... I'm going to "baby" it and
perhaps somehow removing it and putting it back in worked??? I'm at a loss
here
really....... so i dunno.......... lol I'm just keeping my fingers
crossed....
Thanks......
Dan
Maybe its somehow a bad connection on the board with the encoder itself......
from what i can tell there are only 3 contact points on the bottom of it.....
then 2 "clips" on the sides of the encoder that are also solderd, but i don't
think have any function other than stabilizing the encoder itself. Someone
did mention awhile back to resolder the encoder and that may help.... Perhaps
they were right????
Dan
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
DNA: not not archive
Subject: | [PLEASE READ] Virus Laden Spam Purports To Be From Matronics... |
--> XDP4000X-List message posted by: dralle@matronics.com (Matt Dralle)
Dear Listers,
First let me say that I normally don't condone the sharing of warnings
about Internet viruses on the Matronics Email Lists. I don't want to
start a storm of discussion regarding computer viruses on the Lists, so
please just note the information below and refrain from commenting to
the List. The circumstances I describe below are disturbing enough
that I felt an explanation is necessary. That being said...
There is a new email-bourne virus running rampant on the Internet that
is cleverly disguising itself as legitimate email warning of such
things as:
"your email account is disabled because of unauthorized access"
"Some of our clients complained about the spam (negative e-mail
content) outgoing from your e-mail account"
"Probably, you have been infected by a proxy-relay trojan server. In
order to keep your computer safe, follow the instructions."
"Our main mailing server will be temporary unavailable for next two
days, to continue receiving mail in these days you have to
configure our free auto-forwarding service."
All of these messages include an attachment that you are instructed to
click upon to "Get more information", "clean the virus from your
system", or "check your system for infections".
These enclosures all contain a virus that will infect your system and
propagate even more copies of the original message.
The disturbing part of these messages is that they appear to be coming
from very legitimate addresses and have very legitimate, convincing
dialog. For example, I have received a number of them today that
appear to be from "support@matronics.com", "management@matronics.com",
"administration@matronics.com", and "staff@matronics.com".
The text of the messages seems believable enough, and given the forged
source address, seem even more legitimate.
Please be assured that no one at Matronics.com will be sending you
these kinds of messages. If you receive one, it is a spam/virus that
has forged headers and was sent to you from someone other than
Matronics. Delete the message and the attachment promptly. Invest in
a copy of Norton Antivirus and keep the definitions up dated on a daily
basis.
Again, I want to stress that I *DO NOT* want a big discussion of
viruses on the Matronics Email Lists. Please do not reply to this
email with any comments. You may write to me directly at
dralle@matronics.com if you wish, but do not include the List.
Since many of these appear to come from matronics.com, I wanted to
assure everyone that Matronics wasn't the real source of these messages.
Let's be careful out there and keep those virus definitions up to date!
Today alone, the Matronics spam filter and virus blocking appliance
has filtered out 11,550 spam messages and 375 viruses! That's just in
an 18 hour period!
Best regards,
Matt Dralle
Matronics Email List Administrator
--
Matt G. Dralle | Matronics | P.O. Box 347 | Livermore | CA | 94551
925-606-1001 Voice | 925-606-6281 FAX | dralle@matronics.com Email
http://www.matronics.com/ W.W.W. | Featuring Products For Aircraft
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: CDX-C910 Volume issues |
--> XDP4000X-List message posted by: DB <dbotel6500@rogers.com>
Dan,
Are you sure the soldering job was okay?
I had the same problem with mine a few years back.
I took a used deck with a working encoder, and swapped it for mine, and
it worked fine!
The kicker? When I put my old encoder onto the used deck and tried
using it, it also worked
great! Seems like re-working the solder connections on the board did
the trick.
I'd check the soldering and make sure that the contacts are good and
secure...
Good luck!
Daniel
NOTGSXR@aol.com wrote:
>--> XDP4000X-List message posted by: NOTGSXR@aol.com
>
>Hey guys....... Sony actually got it right this time and sent me the rotary
>encoder for my volume control.............. I soldered it on the board to the
>faceplate, and to my surprise..... the same problem..... The volume has a mind
>of its own, rotate the button and it goes up and down at its own
>will............Any other ideas? Thanks in advance..
>
>
>Dan
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|