XDP4000X-List Digest Archive

Fri 04/09/04


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 04:51 AM - Re: Re: Any C90 + XT40v users? (Drem Z)
     2. 07:03 AM - Re: Re: alternative SQ affordable amps for tweet and (Scott Walters)
     3. 03:15 PM - Re: Re: alternative SQ affordable amps for tweet and mid (NOTGSXR@aol.com)
     4. 03:53 PM - Re: Re: alternative SQ affordable amps for tweet and mid (JSujo@aol.com)
     5. 11:08 PM - Re: Re: Any C90 + XT40v users? (Roland M)
     6. 11:17 PM - Re: Any C90 + XT40v users? (Roland M)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:51:35 AM PST US
    From: "Drem Z" <dremgragen@hotmail.com>
    Subject: RE: Any C90 + XT40v users?
    --> XDP4000X-List message posted by: "Drem Z" <dremgragen@hotmail.com> I have a C90, 4kX, and XT40V in my setup with a PS2 and mine is very buggy. The list function while playing a CD in the C90 only displays CDTEXT on the C90 screen, not my LCD. My the audio source select doesn't work correctly. When I press my Source button to move to Auxilary, the sound from my PS2 doesn't work. Then when Ichange the audio source(while watching auxilary video) to CD for dual-source, it pulls audio from the CD Changer input (I don't have a CD Changer), so NOW I get my audio from my PS2 -because I input the audio output from PS2 into the changer input. Then when I press Source again to move back to the Auxilary sound, the PS2 sound works, still, on the CD Changer input (on the 4kX). I have to bypass the XT40V for audio because it adds terrible hiss and signal loss to the stream; it is incredibly bad. I'm wondering if I was sold a maintenence-needy XT40V... :/ I HATE having to have my remote with me to listen to my auxilary sound (by having to change the audio source a few times to get the signal), because my tiny Civic honestly doesn't have anywhere to set the remote while not in use . -Brody ----Original Message Follows---- From: "Woudsma, Mark" Mark.Woudsma@am.sony.com Subject: XDP4000X-List: RE: Any C90 + XT40v users? -- XDP4000X-List message posted by: "Woudsma, Mark" Mark.Woudsma@am.sony.com Hello 4000x'ers, Recently I added an XT-40V tv tuner to my system consisting of a CDX-C90, 4000x and CDX-805. The XT-40v was installed in the unilink bus between the changer and the 4000x. Everything works fine except one thing- The LIST function. It seems that its backwards. Heres my dilema: I wish to hide my c90 from view and only use its remote, along with the GUI generated by the 40V and an in-dash LCD screen. With my c90 connected, and a cd from the changer playing, the 40v displays the list of all 10 discs in the changer. When I push LIST, the c90 faceplate screen displays the list, but the 40v output screen switches from the list to the display with the "spinning disc" graphic, plus the CD#, track # and track time. The output of the 40v is reversed from what the c90 displays on its screen. To me this seems backwards. Does anyone else here have this same configuration???? Im wondering if this is supposed to function this way, or is it a problem with the c90. For comparison sake, I tested the c90 without the 4000x in the loop and the same results were obtained. Also, I have an older XR-U800 decklaying around (from the same era as the 40v) and hooked it up to test. The XR-U800 is the older style, and does not have a source or sound or list buttons, but rather a "file" button that calls up the list on the 40v's output. With this desk it works the right way. I also tested this with a CDX-C7850, a ES deck that is a few years old, with a source, list and sound button. It also was able to control the 40v, and it also worked correctly. (when playing a cd from the changer, the 40v displays the CD#, Track # and Track time, and so does the C7850's screen.When pushing LIST, the 40v displays the LIST of the 10 CD's in the changer. Thanks, Mark W


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:03:08 AM PST US
    From: Scott Walters <scott@packetpushers.com>
    Subject: Re: RE: alternative SQ affordable amps for tweet and
    mid --> XDP4000X-List message posted by: Scott Walters <scott@packetpushers.com> On Thu, 8 Apr 2004 NOTGSXR@aol.com wrote: > Honestly, to me the A/D/S PQ 20 is one of the best amps you can get hands > down...... do you run it bridged? what are you driving with it? -- Scott Walters -PacketPusher


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:15:50 PM PST US
    From: NOTGSXR@aol.com
    Subject: Re: RE: alternative SQ affordable amps for tweet and mid
    --> XDP4000X-List message posted by: NOTGSXR@aol.com In a message dated 4/9/04 10:03:31 AM Eastern Daylight Time, scott@packetpushers.com writes: On Thu, 8 Apr 2004 NOTGSXR@aol.com wrote: > Honestly, to me the A/D/S PQ 20 is one of the best amps you can get hands > down...... do you run it bridged? what are you driving with it? I didn't run it bridged..... Last i used it for a pair of Focal TN-51 tweets and a pair of Focal 4k 3202 mids........ never ran into any trouble or was never dissatisfied with it...... Dan


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:53:15 PM PST US
    From: JSujo@aol.com
    Subject: Re: RE: alternative SQ affordable amps for tweet and mid
    --> XDP4000X-List message posted by: JSujo@aol.com try to find some ADCOM amps,,,very very good sound.


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:08:18 PM PST US
    From: "Roland M" <mdx400@hotmail.com>
    Subject: RE: Any C90 + XT40v users?
    --> XDP4000X-List message posted by: "Roland M" <mdx400@hotmail.com> >From: "Drem Z" <dremgragen@hotmail.com> >Reply-To: xdp4000x-list@matronics.com >To: xdp4000x-list@matronics.com >Subject: RE: XDP4000X-List: RE: Any C90 + XT40v users? >Date: Fri, 09 Apr 2004 11:51:24 +0000 > >--> XDP4000X-List message posted by: "Drem Z" <dremgragen@hotmail.com> > > >I have a C90, 4kX, and XT40V in my setup with a PS2 and mine is very buggy. > > >The list function while playing a CD in the C90 only displays CDTEXT on the >C90 screen, not my LCD. > Well that's an easy one. The 40V isn't capable of displaying CD-TEXT. It is capable of displaying only CustomFile and MD Text information. It may just be the C90 but I'm pretty sure the 40V cannot do CD-TEXT. The only difference betweent the U400V and the 40V was the ability to display MD-Text (the older U400V and U500V could not). > >My the audio source select doesn't work correctly. When I press my Source >button to move to Auxilary, the sound from my PS2 doesn't work. Then when >Ichange the audio source(while watching auxilary video) to CD for >dual-source, it pulls audio from the CD Changer input (I don't have a CD >Changer), so NOW I get my audio from my PS2 -because I input the audio >output from PS2 into the changer input. Then when I press Source again to >move back to the Auxilary sound, the PS2 sound works, still, on the CD >Changer input (on the 4kX). I have to bypass the XT40V for audio because it >adds terrible hiss and signal loss to the stream; it is incredibly bad. I'm >wondering if I was sold a maintenence-needy XT40V... :/ I HATE having to >have my remote with me to listen to my auxilary sound (by having to change >the audio source a few times to get the signal), because my tiny Civic >honestly doesn't have anywhere to set the remote while not in use > . You are talking about the AUX input on the 40V, correct? And not on an XA-107 or XA-300? In that case it sounds to me like the AUX input is working correctly. There should be analog RCAs going from the TV tuner to the XDPs SLAVE analog input. But wouldn't you have to have it setup that way to get audio from the TV tuner? Maybe I'm misunderstanding something? Do you mean that when you have analog RCAs connected from the TV tuners output to the XDP's Slave input you get no audio when inputting something to the AUX input on the TV tuner? If that is the case then yes it isn't working correctly. As for the hiss/signal loss, I'm thinking you might have some sort of a ground loop issue between the TV tuner and the PS2. This often occurs when you use inverters (probably how you're powering the PS2?). Why it doesn't happen with the XDP but does happen with the TV tuner, well that's as mysterious as why you get ground loops in the first place, lol. Perhaps your TV tuner has a defect though, I'm not sure. Because if you did have a TV tuner and an analog CD changer and you needed to get audio from the TV tuner, the changer would have to go through the TV tuner no matter what. (Unless you had a source selector and wired it "downstream" of the TV tuner instead of using the 40Vs UniLink "pass-thru" and/or wiring the MCA before the tuner.) Roland M. Tax headache? MSN Money provides relief with tax tips, tools, IRS forms and more! http://moneycentral.msn.com/tax/workshop/welcome.asp


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:17:39 PM PST US
    From: "Roland M" <mdx400@hotmail.com>
    Subject: Any C90 + XT40v users?
    --> XDP4000X-List message posted by: "Roland M" <mdx400@hotmail.com> >--> XDP4000X-List message posted by: "Woudsma, Mark" ><Mark.Woudsma@am.sony.com> > > >The LIST function. It seems that its backwards. Heres my dilema: > >I wish to hide my c90 from view and only use its remote, along with the GUI >generated by the 40V and an in-dash LCD screen. > >With my c90 connected, and a cd from the changer playing, the 40v displays >the list of all 10 discs in the changer. When I push LIST, the c90 >faceplate >screen displays the list, but the 40v output screen then displays the >"spinning disc" graphic, plus the CD#, track # and track time. The output >of >the 40v is reversed from what the c90 displays on its screen. To me this >seems backwards. > >Does anyone else here have this same configuration???? Im wondering if this >is supposed to function this way, or is it a problem with the c90. > >I also tested this with a CDX-C7850, a ES deck that is a few years old, >with >a source, list and sound button. It also was able to control the 40v, and >it >also worked correctly. (when playing a cd from the changer, the 40v >displays >the CD#, Track # and Track time, and so does the C7850's screen. When >pushing LIST, the 40v displays the LIST of the 10 CD's in the changer. > >Thanks, > >Mark W Funny that you say it works backwards, because personally I wish it worked that way with all units! LOL! Your TV tuner is functioning correctly... Apparently that is how the C90 and TV tuner work together. And yes it is opposite to pretty much every other unit with TV Control. I was kind of upset that if the TV tuner is connected and you press LIST you don't get anything on the display of the HU--it ONLY goes to the monitor(s). On the C90 the LIST function remains on the C90 but doesn't go the monitor(s). Really I don't understand why Sony didn't make it go on BOTH. It makes a lot more sense like that. I've tried it with both my C7850 and [XR-]C9100 and both do the same thing--LIST on the TV tuner but nothing on the HU :( Anyway it seems to be a C90 only thing because the C7850 is actually a year or two newer than the C90 (eventhough the C7850 difffers only slightly fromt the C780 which was the same year as the C90 I believe). I don't know how the (few) Xplod units that have TV Control handle the tuner but I think it is just like every other unit. This is one of the few things I found counter-intuitive about UniLink. Why Sony didn't let you have LIST-up on both the HU and the monitor is beyond me. Just doesn't make sense, especially since in some locales (actually probably most) you aren't [legally] allowed to have a video screen in sight of the driver while the vehicle is in motion. So if you have any other unit than a C90 and you have the TV tuner, and you can't see the screen(s) you also can't what is in the changer via LIST-up :( Roland M.




    Other Matronics Email List Services

  • Post A New Message
  •   xdp4000x-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/XDP4000X-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/xdp4000x-list
  • Browse XDP4000X-List Digests
  •   http://www.matronics.com/digest/xdp4000x-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --