Today's Message Index:
----------------------
1. 12:44 PM - Midbass drivers and general questions. (NOTGSXR@aol.com)
2. 06:53 PM - Re: Dark lines in C90 display (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Midbass drivers and general questions. |
--> XDP4000X-List message posted by: NOTGSXR@aol.com
Hey all........ The system is changing again once and for all!!! (famous
last words)
Some of this relates to around april of last year where Randy and i kinda
talked a bit about these Vifa drivers.....
They are 8.75" Drivers out of the Mackie HR824 studio monitors..... He
turned me onto the eBay seller i think and anyway, i have 4 of these drivers......
The OEM Vifa Part # is 490-001-00. My installer friend tells me there's no
way to get one in each door let alone both...... But i can be determined at
times..... (no comments from you Pete!!) and i must find a way!!!
Basically my setup will be like this:
Tweets B&G Neo3PDR Planar Ribbon tweets from 6.3k up.......
Mids: DLS IR3" Dome Midrange i would like to play from 315hz up or worst
case 500hz up...
Midbass: still up in the air, but i would love to make a pair of these 8's
in each door :) playing from i guess 78hz up to either 300hz or 500hz........
Sub: Well, this is probably not too appropriate here, but it is a Prototype
15" i got from TC Sounds...... (again, no comments Pete!!!!) It was supposed
to be the next Audiomobile MASS 3000 series sub before Matt Overpeck ruined
his shortlived company....... I still have the MASS 2012's though..... Home
Theater duty... incredible driver.... Needless to say, it is a huge sub.....
and of course it will be sealed and playing from 78hz down...... i hope it is
very tight and has some extreme low frequency extension...... I know it will
already be too loud.... but that can be fixed :)
Amps i have for use on the front stage are either my A/D/S PQ 20's or my
P4100's.... I have 2 of each...... I love the PQ 20's which are 80 X 4 and the
P4100's are 100 X 4..... the PQ 20's have no xovers, the P4100's do....... I
may get my hands on an older A/D/S Crossover also to help with the 315hz
crossover points or i can just use the 500hz off of the XDP.. The sub amp......
Well, that'll be a JBL BPX2200.1 (you know, one of the Crown enginneerd ones
that probably again, isn't appropriate here (right Pete??) lol.......
Basically, my installer friend says it would be best to use a pair of 6.5's
in each door which would be alot easier to only mold the bottom half of the
door panel...... I have looked, but don't think there are any 6.5's that can
do this job....... I was wondering what you guys think on this......
Any help or thoughts would be greatly appreciated..........
Thanks.
Dan
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Dark lines in C90 display |
--> XDP4000X-List message posted by: Matt Dralle <dralle@matronics.com>
Yeah, mine started doing that a month or so ago. The problem is the
interface strip between the PC board and the LCD display. Its this little,
wiggly, strip made up of alternating
carbon/insulator/carbon/insulator/... I carefully disassembled my display
unit and used some isopropyl alcohol on a quetip to clean the four contact
areas (PC, LCD, two sides of the wiggly thing). Worked good.
Matt
At 12:24 PM 8/11/2004 Wednesday, you wrote:
>--> XDP4000X-List message posted by: "Jim Hunton" <Jimh@ntgi.com>
>
>I have several vertical dark lines in the display of my C90.
>Is there a fix for this or is my display dying?
>
>Thanks,
>
>Jim
>
>Jim Hunton
>The Network Technology Group, Inc.
>San Jose, San Francisco
>(408)494-0301
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|