---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Sat 03/12/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:50 AM - Help! C-90 faceplate emitting continuous tone? (Paul Chambers) 2. 11:38 AM - Re: Help! C-90 faceplate emitting continuous tone? (Randy Visentine) ________________________________ Message 1 _____________________________________ Time: 10:50:16 AM PST US From: "Paul Chambers" Subject: XDP4000X-List: Help! C-90 faceplate emitting continuous tone? 0.51 PLING_QUERY Subject has exclamation mark and question mark --> XDP4000X-List message posted by: "Paul Chambers" My car has been sitting awhile, and the battery ran flat. I fully recharged it, but now when I turn on the ignition, the C-90's faceplate just emits a continuous tone and does not turn on the display. It's not inverter whine, but some sort of error signal. When I turn off the ignition, the tone stops, and after a few seconds I get the 'remove faceplace' two-tone reminder beeps, as normal. I pushed several of the faceplate buttons to see if that had any effect. The eject did, the faceplate dropped as normal. But it won't retract... Anyone know what's going on? How do I get it to behave itself again? Just when I'm about to sell the car too, darn it... Paul ________________________________ Message 2 _____________________________________ Time: 11:38:42 AM PST US From: Randy Visentine Subject: Re: XDP4000X-List: Help! C-90 faceplate emitting continuous tone? --> XDP4000X-List message posted by: Randy Visentine Have you "reset" the C90 w/ the Reset button? Randy V. Houston, TX Audio-Dude/Musician/Crazy Guy