----------------------------------------------------------
                           XDP4000X-List Digest Archive
                                      ---
                     Total Messages Posted Sun 03/13/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:06 AM - Re: Help! C-90 faceplate emitting continuous tone?  (Carl Renaghan)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:06:52 AM PST US
From: Carl Renaghan <orudus@yahoo.com>
Subject: Re: XDP4000X-List: Help! C-90 faceplate emitting continuous tone?

--> XDP4000X-List message posted by: Carl Renaghan <orudus@yahoo.com>

I had this problem when I plugged in a dead XDP-210 to
my C90. If I unplugged the EQ, and reset teh C90, it
went away.

--- Paul Chambers <xdp4000x@lists.bod.org> wrote:
> --> XDP4000X-List message posted by: "Paul Chambers"
> <xdp4000x@lists.bod.org>
> 
> My car has been sitting awhile, and the battery ran
> flat. I fully recharged
> it, but now when I turn on the ignition, the C-90's
> faceplate just emits a
> continuous tone and does not turn on the display.
> It's not inverter whine,
> but some sort of error signal. When I turn off the
> ignition, the tone stops,
> and after a few seconds I get the 'remove faceplace'
> two-tone reminder
> beeps, as normal.
> 
> I pushed several of the faceplate buttons to see if
> that had any effect. The
> eject did, the faceplate dropped as normal. But it
> won't retract...
> 
> Anyone know what's going on? How do I get it to
> behave itself again? Just
> when I'm about to sell the car too, darn it...
> 
> Paul
> 
>
>
> http://www.matronics.com/archives
>
> 
>