---------------------------------------------------------- XDP4000X-List Digest Archive --- Total Messages Posted Sun 05/29/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:55 PM - Re: XT-63V (Roland M) ________________________________ Message 1 _____________________________________ Time: 09:55:01 PM PST US From: "Roland M" Subject: RE: XDP4000X-List: XT-63V --> XDP4000X-List message posted by: "Roland M" >From: Scott Thibault >Reply-To: xdp4000x-list@matronics.com >To: xdp4000x-list@matronics.com >Subject: XDP4000X-List: XT-63V >Date: Tue, 17 May 2005 22:29:19 -0700 (PDT) > >--> XDP4000X-List message posted by: Scott Thibault > >Will this work with the CDX-C90?? I think the answer was no but cant >remeber I have been noticing on Ebay that a lot of sellers claim that it >works with unilink decks? I am looking to get the xav-7w to use as a >monitor and cant seem to find a XT-40v Tv tuner. I see a ton of the XT-63V. > I thought the sole purpose of the XT-63V was that it was to be used with the XAV-7W. The 63V was designed to work with the 7W but with the 7W controlling it. The C90 was not meant to control the 63V. In fact Sony even specifially stated with the 63V that it was only to be used with the 7W at that time and not other UniLink decks. However it might well work despite this, perhaps inperfectly (similar to how XDP units behave when connected to HUs with built-in DSP or HX-DSP which were not meant to control an XDP because of the built-in DSP unit). If you have both a C90 and a 7W I can't see how it could hurt to try. Because even if it didn't work with the C90 controlling it, the 7W would definitely control it. Roland M.