Today's Message Index:
----------------------
1. 07:42 AM - Re: Changer Options (telmnstr@757.org)
2. 11:14 AM - Brand New XDP-4000x for Sale - Scotland (Colin)
3. 03:44 PM - Re: Changer Options (Scott Thibault)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Changer Options |
--> XDP4000X-List message posted by: telmnstr@757.org
> They had one when the C90 was new :) I will find my brochure and email a pdf.
> jtholley03
I use a Sony XT-40V. As long as the C90 has DSP and TV Tuner controls you
should be good. If you connect the XT-40V to a head unit that does not
specifically say it will drive the XT-40V, then the XT-40V will only
display the data on the unilink bus (song / radio titles and what not),
and you will never be able to source over to the TV/Video input.
I'm installing a "soft modded" XBox with the XBMC (XBoxMediaCenter) for
playback in my car. It supports a wide variet of formats.
I'm getting a bit of noise from the inverter (I really didn't want to use
an inverter). I'd love to use the TOSLink input on the 210EQ, but it's not
going to happen. So I'm thinking about building my own SPDIF to analog
board, and using that for the audio input to the analog inputs on the
XT-40V.
I've heard that the 4000 adds a bit of a delay while it does it's DSP
processing which throws video off a bit. I'm sure there is a way to delay
the video though, to align things back up.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Brand New XDP-4000x for Sale - Scotland |
--> XDP4000X-List message posted by: "Colin" <colin@smithspace.co.uk>
I have one of, if not the best DSP ever made for sale. This unit albeit not
boxed is brand new, 100% perfect condition still with the labels under the
connection screws. This is nicest piece of equipment i have ever owned and
have had it for a number of years just never had the right car to install it
into and it breaks my heart to sell it (sad i know)but the time comes when
other things are more important in your life.
This is a is a fully digital preamplifier with a 20 band par EQ, Time
Alignment, 4 way active cross over with 4 pairs of 24 bit crystal DACs all
programmed from a laptop. An optical cable can be used as link cable from
the HU to this unit. It can do so much i could just write forever about it.
I also have a CDX-C910 which can be linked up to this unit via the optical
cable. The CDX-C910 is not quite as good as the CDX-C90 (which is most
peoples choice of HU to run with this DSP) as a stand alone HU however does
not decrease the sound quality at all when linked up to the XDP-4000x. I
also have a 5 meter optical cable and USB to serial cable which I will
supply.
Anyway looking for offers, if you know what this can do then you know how
much to offer.
I also have everything in my system for sale as listed below.
PS I have been a member on here for a number of years, this is just a new
e-mail address.
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Changer Options |
--> XDP4000X-List message posted by: Scott Thibault <tbone7467@yahoo.com>
No hahahha!! I mean I hope phat noise makes one of those mobile media devices for
the cdx-c90 and the Xt-v40 unit.
telmnstr@757.org wrote: --> XDP4000X-List message posted by: telmnstr@757.org
> They had one when the C90 was new :) I will find my brochure and email a pdf.
> jtholley03
I use a Sony XT-40V. As long as the C90 has DSP and TV Tuner controls you
should be good. If you connect the XT-40V to a head unit that does not
specifically say it will drive the XT-40V, then the XT-40V will only
display the data on the unilink bus (song / radio titles and what not),
and you will never be able to source over to the TV/Video input.
I'm installing a "soft modded" XBox with the XBMC (XBoxMediaCenter) for
playback in my car. It supports a wide variet of formats.
I'm getting a bit of noise from the inverter (I really didn't want to use
an inverter). I'd love to use the TOSLink input on the 210EQ, but it's not
going to happen. So I'm thinking about building my own SPDIF to analog
board, and using that for the audio input to the analog inputs on the
XT-40V.
I've heard that the 4000 adds a bit of a delay while it does it's DSP
processing which throws video off a bit. I'm sure there is a way to delay
the video though, to align things back up.
---------------------------------
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|