Today's Message Index:
----------------------
1. 05:08 AM - Re: Phatnoise Connection Success!! (bobbybraun@comcast.net)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Phatnoise Connection Success!! |
--> XDP4000X-List message posted by: bobbybraun@comcast.net
I currently have no scrolling on any source, in dash CD, Changer, or Phatbox.
Auto Scroll is set to on, and when pressing the 'scrl' button on the remote all
I get is a beep with no response. When I hooked up the PB for the first time
scrolling actually worked a few times, but now it's back to normal. This was
the first time since I can remember that scrolling has functioned on my deck,
so the addition of the PB is not the problem. I burn all my cd's I listen to
in my car, and in doing so I add CD text to them during the process. The text
always functions properly as far as the information that can be seen without
scrolling, but I get nothing more. I've just gotten used to it being this way,
but I wonder what the problem is? I have tried factory pressed cd's that
are CD Text encoded as well, and they function the same way, so I guess that mostly
rules out problems during the burning process. Maybe a bad master uni-link
cable? Maybe I should try the scrolling feature
with m
y processor and all it's accessories unplugged to see what happens?
-------------- Original message --------------
From: "Roland M" <mdx400@hotmail.com>
> --> XDP4000X-List message posted by: "Roland M"
>
> >--> XDP4000X-List message posted by: bobbybraun@comcast.net
> >
> Have any of you had any odd reactions to the scrolling text ability of the
> C90 and it's CD-Text capabilities? I've noticed that ever since I've owned
> my C90 that it's scrolling capabilities have rarely worked and I always
> figured it was because of the software I was using to burn CD-Text CD's and
> not the fault of the hardware. However I also noticed the other day when I
> first hooked up my PB that the scrolling feature did work, albeit for one
> song, and since then has gone back to normal, with the text frozen at the
> maximum viewable characters shown on the on screen display.
> >
>
> Hmm, while Matt has pointed out some very specific details about the Phatbox
> scrolling problems, I'm curious as to what problems you're encountering with
> CD-Text encoded CDs which should work fine.
>
> Keep in mind you have to have the A.Scrl feature enabled on the HU (I'm sure
> you do) and then the C90's normal behavoiur is this:
>
> Track titles scroll once whenever the track changes, automatically. After
> scrolling once, the scrolling stops. Why Sony didn't do continuous
> scrolling is a mystery but that's the way it is on Sony mobile gear. This
> is the same for CD-Text changers as well as a CD-Text disc in the HU's CD
> drive. With a changer you can also use the LIST up feature to see CD-Text
> disc titles from a changer, BUT they will never scroll using the LIST
> feature. Furthermore assigning a CustomFile disc title eliminates the
> CD-Text disc title (not on the disc of course, just in the UniLink system).
> The reason you would want to assign a CustomFile title, however, is because
> without doing that you cannot assign disc-specific sound customisations (DSP
> File).
>
> CD-Text titles will also scroll if you cycle through the DISP modes and land
> back at a scrollable text title. Additionally you can scroll by activating
> scroll in the menu (not sure how this works on the C90) or on newer units by
> using the dedicated/discrete "SCROLL" button located on the HU or remote.
>
> Usually CD-Text problems on CD-Rs, caused by the disc being improperly
> burned somehow, will result in no text being read at all and not scrolling
> problems. I.e. if the text on a particular CD works, the scrolling should
> be unaffected.
>
> Roland M.
>
>
>
<html><body>
<DIV>I currently have no scrolling on any source, in dash CD, Changer, or Phatbox.
Auto Scroll is set to on, and when pressing the 'scrl' button on the
remote all I get is a beep with no response. When I hooked up the PB for
the first time scrolling actually worked a few times, but now it's back
to normal. This was the first time since I can remember that scrolling
has functioned on my deck, so the addition of the PB is not the problem. I
burn all my cd's I listen to in my car, and in doing so I add
CD text to them during the process. The text always functions properly
as far as the information that can be seen without scrolling, but I get
nothing more. I've just gotten used to it being this way, but I wonder what
the problem is? I have tried factory pressed cd's that are CD Text encoded
as well, and they function the same way, so I guess that mostly rules
out problems during the burning process. Ma
ybe a
bad master uni-link cable? Maybe I should try the scrolling feature with
my processor and all it's accessories unplugged to see what happens?</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px
solid">-------------- Original message -------------- <BR>From: "Roland M" <mdx400@hotmail.com>
<BR><BR>> --> XDP4000X-List message posted by:
"Roland M" <MDX400@HOTMAIL.COM><BR>> <BR>> >--> XDP4000X-List message
posted by: bobbybraun@comcast.net <BR>> > <BR>> Have any of you
had any odd reactions to the scrolling text ability of the <BR>> C90 and it's
CD-Text capabilities? I've noticed that ever since I've owned <BR>> my C90
that it's scrolling capabilities have rarely worked and I always <BR>> figured
it was because of the software I was using to burn CD-Text CD's and <BR>>
not the fault of the hardware. However I also noticed the other day when
I <BR>> first hooked up my PB that the scrolling feature did work, albeit
for one <BR>> song, and since then has gone back to normal, with the text frozen
at the <BR>> maximum viewable characters sho
wn on
the on screen display. <BR>> > <BR>> <BR>> Hmm, while Matt has pointed
out some very specific details about the Phatbox <BR>> scrolling problems,
I'm curious as to what problems you're encountering with <BR>> CD-Text
encoded CDs which should work fine. <BR>> <BR>> Keep in mind you have to
have the A.Scrl feature enabled on the HU (I'm sure <BR>> you do) and then
the C90's normal behavoiur is this: <BR>> <BR>> Track titles scroll once
whenever the track changes, automatically. After <BR>> scrolling once, the
scrolling stops. Why Sony didn't do continuous <BR>> scrolling is a mystery
but that's the way it is on Sony mobile gear. This <BR>> is the same for
CD-Text changers as well as a CD-Text disc in the HU's CD <BR>> drive. With
a changer you can also use the LIST up feature to see CD-Text <BR>> disc
titles from a changer, BUT they will never scroll using the LIST <BR>> feature.
Furthermore assigning a CustomFile disc title el
iminat
======
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|