XDP4000X-List Digest Archive

Mon 08/28/06


Total Messages Posted: 1



Today's Message Index:
----------------------
 
     1. 06:17 PM - Re: Display is out on C90, Please help (Shane Sexton)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:17:42 PM PST US
    From: "Shane Sexton" <shnsx@comcast.net>
    Subject: Display is out on C90, Please help
    Well, I will bite the bullet. Rather than waiting for a broken C90 with a good main board to show up on EBay, I will send it into the Loredo Center. I explained what was wrong (disk slot LEDs out, and display out), I clearly stated that bothe these problems were the main board, and advised that I swapped it out with another unit to test and confirm. I even swapped out the faceplate plastics from the new to the old scratched one to avoid any potential problems lol. Wish me luck. Someone else responded a couple weeks ago and had good luck with their refurb, how is it holding up, and was it done at Loredo? -----Original Message----- From: owner-xdp4000x-list-server@matronics.com [mailto:owner-xdp4000x-list-server@matronics.com]On Behalf Of bobbybraun@comcast.net Sent: Thursday, August 10, 2006 1:29 AM To: xdp4000x-list@matronics.com Subject: RE: XDP4000X-List: Display is out on C90, Please help Just a word to the wise, be very wary of the repair quality when going through Sony these days. I had an absolutely horrible experience when dealing with Sony for a repair on a spare C90 of mine... [Shane Sexton Clicky... http://forums.matronics.com/viewtopic.php?t=4946&sid=e4be10d9a9adad3efec59d9 6d1f4f9e5 To this day the unit will not read CD's, and it was sent to them in usable working condition only to be refurbished, but was returned to me completely broken and missing screws, and once during the four return trips to Sony they even sent it back to me with a loose part rolling around inside of it. In any case, make sure to document the condition of your unit before sending it there way, and take photos. They ended up paying me to have another company to try to fix my C90, and it still hasn't come back to me in working condition... Plus they have no equivalent substitute for the C90 when they run out of repair options either. They offered me an Xplod unit from ~94 that retailed for under $400 in replacement for my broken C90, what a slap in the face... Boo Sony... Bobby -------------- Original message -------------- From: Scott Thibault <tbone7467@yahoo.com> NP Shane Sexton <shnsx@comcast.net> wrote: Cool, As soon as I get the new one from Ebay I will call sony. Thanks alot for this info. -----Original Message----- From: owner-xdp4000x-list-server@matronics.com [mailto:owner-xdp4000x-list-server@matronics.com]On Behalf Of Scott Thibault Sent: Wednesday, August 09, 2006 8:56 PM To: xdp4000x-list@matronics.com Subject: RE: XDP4000X-List: Display is out on C90, Please help yeah they said they could replace it so I told them I wanted the new flip up screen I think it was the A1. I told them I have the xdp-4000x and it would be worthless with out the cdx-c90. they wanted me to get some crap xplode deck not sure what model. I told them no and they gave the the info to send it in the get repaired Shane Sexton <shnsx@comcast.net> wrote: Question, When you set up the repair with Sony did they say that if they can't fix the unit, they would replace it with a comparible model (which we both know there is none)? -----Original Message----- From: owner-xdp4000x-list-server@matronics.com [mailto:owner-xdp4000x-list-server@matronics.com]On Behalf Of Scott Thibault Sent: Wednesday, August 09, 2006 8:19 PM To: xdp4000x-list@matronics.com Subject: RE: XDP4000X-List: Display is out on C90, Please help call sony and see if they can refurb it. I got mine done a coupld of weeks agot for a little over $100 bucks. well worth it. Shane Sexton <shnsx@comcast.net> wrote: Thanks for the quick response. Due to my FU, I had no choice but to snag another C90 off EBay, only this one includes everything even the box, from what I understand it is also hardly used and in mint condition. I would like to get at least one of these other units in perfect working order, so if anyone would like to swap a main board for a perfectly good audioboard, and CD drive unit, let me know. I love the C90, had way too many Eclipse units in my Element over the past three years, and not by my choice, they are all crap. It just amazes me how rich, and SMOOTH the sound is from the C90 is, It just amazes me that you can't get anything like this anymore, people rave about Eclipse, and I have to say that the 8455 that I had for seven weeeks before it died was the best one SQ wise, but again, not quite like the C90. Needless to say, I need to have a spare so I can sleep at night, It won't be long before the C90 will be an endangered species, and we won't be able to get another one. LOL -----Original Message----- From: owner-xdp4000x-list-server@matronics.com [mailto:owner-xdp4000x-list-server@matronics.com]On Behalf Of bobbybraun@comcast.net Sent: Wednesday, August 09, 2006 7:00 PM To: xdp4000x-list@matronics.com Subject: Re: XDP4000X-List: Display is out on C90, Please help When using the C90 and 210EQ in conjunction, the VC filter will automatically be disabled since your audio output is ultimately coming form the 210eq's DAC's. But either way, it sounds like one or both units may need repair at this point. Best of luck! Bobby -------------- Original message -------------- From: "Shane Sexton" <shnsx@comcast.net> > --> XDP4000X-List message posted by: "Shane Sexton" > > OK, Hopefully someone can help. Recently, I just purchased two CDX-C90's off > ebay, one is in mint, hardly used condition, and the other had a few minor > problems, including a flickering display, and missing inverter box (cut off > from back). > > I chose to install the nicer unit, and use that one to diagnose the > flickering faceplate issue, and needless to say, the bad faceplate blew out > something on the main board on the nicer unit. > > I tried to swap the EL inverter box to the other unit and that one worked > fine, so that eliminates the inverter, also tried the good face plate on > both units. > & lt; BR >> ===== ----------------------------------------------------------------------------




    Other Matronics Email List Services

  • Post A New Message
  •   xdp4000x-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/XDP4000X-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/xdp4000x-list
  • Browse XDP4000X-List Digests
  •   http://www.matronics.com/digest/xdp4000x-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --