---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Wed 01/14/04: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:34 AM - Re: Elizabeth, here's one for you (Brian Lloyd) 2. 07:54 AM - Re: Aileron Alignment and Rigging Problems (Dee Grimm) 3. 07:54 AM - Re: Elizabeth, here's one for you (E R) 4. 08:06 AM - Re: Elizabeth, here's one for you (Dave Laird) 5. 09:08 AM - Re: Aileron Alignment and Rigging Problems (Jon Boede) 6. 04:50 PM - Re: Elizabeth, here's one for you (Gus Fraser) ________________________________ Message 1 _____________________________________ Time: 03:34:27 AM PST US From: Brian Lloyd Subject: Re: Yak-List: Elizabeth, here's one for you --> Yak-List message posted by: Brian Lloyd jay reiter wrote: > --> Yak-List message posted by: "jay reiter" > > Taint funny MaGee. Yes it is. Substitute "Slick Willie," "Ronnie," or "JFK" and it is still just as funny. The key is that it is always funny to poke fun at elected officials since most take themselves way too seriously. Just think of the fun we can have when Liddy Dole runs against Hillary Clinton! -- Brian Lloyd 6501 Red Hook Plaza brian@lloyd.com Suite 201 http://www.lloyd.com St. Thomas, VI 00802 +1.340.998.9447 (voice) +1.360.838.9669 (fax) ________________________________ Message 2 _____________________________________ Time: 07:54:32 AM PST US From: "Dee Grimm" Subject: Re: Yak-List: Aileron Alignment and Rigging Problems --> Yak-List message posted by: "Dee Grimm" Hi Dennis, Drop the flap and there is an adjustment point to align the ailerons at the end of the push rod. However, be certain that you know the exact cause of the difference prior to making the adjustment. Regards, Dee ________________________________ Message 3 _____________________________________ Time: 07:54:59 AM PST US From: E R Subject: Re: Yak-List: Elizabeth, here's one for you --> Yak-List message posted by: E R I think it's funny. Gus, I didn't make it to NYC because I broke my foot. The idea of hobbling down Broadway in the ice wasn't attractive enough to lure me to your fine city. Will be there in a couple months. Elizabeth jay reiter wrote: --> Yak-List message posted by: "jay reiter" Taint funny MaGee. ----- Original Message ----- From: "Gus Fraser" Subject: Yak-List: Elizabeth, here's one for you > --> Yak-List message posted by: "Gus Fraser" > > Bush Jr : Guys, guys, guess what we are going into space again. > > Aide : Well that's just fine Mr P where are we going ? > > BJ : To the sun damn it, people expect us to go to Mars but boy they will be > surprised... > > Aide : Mr P, we will burn up it gets real hot on the sun, hotter than a > snakes ass at a round up. > > BJ : Ah, but that's the clever bit, we go in at night ! > > > Funny if it could not be true. > > Excited Copper mountain in Feb, can't wait.... > > Gus > > --------------------------------- ________________________________ Message 4 _____________________________________ Time: 08:06:04 AM PST US Subject: Re: Yak-List: Elizabeth, here's one for you From: Dave Laird --> Yak-List message posted by: Dave Laird Hey....that's just a recycled Texas Aggie joke.... but I think the Aggies were serious.... ;) Dave Laird N63536 "Betty" Dallas On Tuesday, January 13, 2004, at 06:48 PM, Gus Fraser wrote: > --> Yak-List message posted by: "Gus Fraser" > > Bush Jr : Guys, guys, guess what we are going into space again. > > Aide : Well that's just fine Mr P where are we going ? > > BJ : To the sun damn it, people expect us to go to Mars but boy they > will be > surprised... > > Aide : Mr P, we will burn up it gets real hot on the sun, hotter than a > snakes ass at a round up. > > BJ : Ah, but that's the clever bit, we go in at night ! > > > Funny if it could not be true. > > Excited Copper mountain in Feb, can't wait.... > > Gus > > > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > > > > ________________________________ Message 5 _____________________________________ Time: 09:08:20 AM PST US Subject: Re: Yak-List: Aileron Alignment and Rigging Problems From: "Jon Boede" --> Yak-List message posted by: "Jon Boede" After replacing the bearings in the transfer arm, one of my ailerons was a little lower than the other. Adjusting them so that they were perfectly equal and the stick centered did make the airplane fly just slightly better. Makes you appreciate just how perfectly balanced a plane is when it's flying. Jon > --> Yak-List message posted by: "Dennis Von Ruden" > > > At the risk of sounding like a guy who does not know which end of the > screwdriver to hold on to, we are having an alignment/rigging problem > with the starboard aileron. Just finishing up a CJ restoration project. > We inspected and recovered both ailerons. The port aileron aligns > perfectly with the trailing edge of the wing. The starboard aileron > droops down and has a wider gap between it and the wing. Probably 3/16 > inch in the vertical and horizontal planes at the right wingtip. You can > visually see the difference. It does not appear that we have the aileron > attachment fitting (that bolts to the rear spar) up side down. The > aileron is new with no damage. Both wing tips hit a bridge when the > aircraft was being transported by railroad on the way from Long Beach. > Yes, the wing tips were damaged (and replaced). But, there was no spar > or aileron attachment fitting damage. > > > My question is am I being too picky to expect both ailerons to perfectly > align? Anyone ever have a similar problem with alignment? Thanks. > > > Dennis Von Ruden > > dvonruden@generalequip.com ________________________________ Message 6 _____________________________________ Time: 04:50:15 PM PST US From: "Gus Fraser" Subject: RE: Yak-List: Elizabeth, here's one for you --> Yak-List message posted by: "Gus Fraser" I have a constant need to bring those in power to their senses with a bit of humility, regardless who is in power. Today's version of this intimated that we are going to the moon to look for weapons, cause they just have to be somewhere. A bit like jokes about T34s getting all the limelight at events when as we all know the wings are about to fall off of all of them ;))) Gus -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Dave Laird Subject: Re: Yak-List: Elizabeth, here's one for you --> Yak-List message posted by: Dave Laird Hey....that's just a recycled Texas Aggie joke.... but I think the Aggies were serious.... ;) Dave Laird N63536 "Betty" Dallas On Tuesday, January 13, 2004, at 06:48 PM, Gus Fraser wrote: > --> Yak-List message posted by: "Gus Fraser" > > Bush Jr : Guys, guys, guess what we are going into space again. > > Aide : Well that's just fine Mr P where are we going ? > > BJ : To the sun damn it, people expect us to go to Mars but boy they > will be > surprised... > > Aide : Mr P, we will burn up it gets real hot on the sun, hotter than a > snakes ass at a round up. > > BJ : Ah, but that's the clever bit, we go in at night ! > > > Funny if it could not be true. > > Excited Copper mountain in Feb, can't wait.... > > Gus > > > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > _- > ======================================================================= > > > >