Today's Message Index:
----------------------
1. 05:36 AM - Sun & Fun (cjpilot710@aol.com)
2. 09:05 AM - Re: Tach Generator (Doug Sapp)
3. 01:52 PM - Re: Re: Metal in oil (Jorgen Nielsen)
4. 01:55 PM - Re: Tach Generator (Jorgen Nielsen)
5. 08:13 PM - Re: Tach Generator (Marshall)
6. 08:32 PM - Duane Cole (cjpilot710@aol.com)
7. 11:24 PM - anyAWOS (MFilucci@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
AC6M@aol.com, Bigj10@msn.com, keith.goolsby@eds.com, gaf127enl@msn.com,
MDSHELLEY@aol.com, yakjock@msn.com, walterfricke@yahoo.com,
finleycj6@juno.com, BDorsey777@aol.com, dabear@damned.org,
tcalloway@hangar-d.com, mason.t@worldnet.att.net, wpairprt@tdstelme.net,
radialpower@cox.net, FamilyGage@aol.com, rvfltd@televar.com,
cd001633@mindspring.com, ernest.martinez@oracle.com, FOUGAPILOT@aol.com,
N23GD@yahoo.com, jtobul@tobul.com, KILOUSMC@aol.com,
tormentor34@netzero.net
--> Yak-List message posted by: cjpilot710@aol.com
Troops,
Just to recover Sun amp; Fun stuff.
Starting date is 13 April 2004
I have not got the final word from airboss what days we'll fly in the show
but we may have this schedule:
Thursday the 15th
Leeward Flyout is Friday 16 April 2004
Saturday the 17th
Sunday the 18th
Last day for us is 18 April 2004
Sun amp; Fun ends 19 April 2004
Hotel: Howard Johnson Winter Haven (863-294-7321)
The group rate of $59./nite under the "RedStar Pilots Association" and is
only good until 13 March 2004.nbsp; All rooms are nonsmoking, double beds.
Our airfield is KGIF (Winter Haven Gilbert field) located about 8 nm north of
BOW.nbsp; About 11 nm ENE of LAL.nbsp; FBO is Winter Haven Air Services,
Rich Parish, (863-293-2501)
Starting tommorow, I'll be flying the B-24/25 around Florida until Feb. 23rd.
I''ll be busy and don't have access to e-mail all the time.nbsp; My cell
phone number is 386-503-9820 if you have questions.
Keep it safe.
Jim Goolsby
"They that can give up essential liberty to obtain a little safety,
deserve neither liberty nor safety"
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; Benjamin Franklin 1759
"With my shield, or on it"
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; Trojan Warriors BC
"The reason older men are like fine wine.nbsp; When young, they are like
grapes until some woman stomps all over them."
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;
nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp;nbsp; Unknown older man.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Yak-List message posted by: "Doug Sapp" <rvfltd@televar.com>
Tom, I have found 2 in my use stock, contact me off list-- $7.50 each.
Always Yakin,
Doug Sapp
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of tom
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: tom <ditapo@yahoo.com>
I can make a block plate for the tach generator. CNC machined and polished
for $25. I have the horizon tach as well and designed the plate for my 55M .
It will take a week or two to make a batch up.
Tom Layton
Marshall <nx4me@earthlink.net> wrote:
--> Yak-List message posted by: Marshall
Doug,
Thanks for looking. I will check back with you.
Marshall
-----Original Message-----
From: Doug Sapp
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: "Doug Sapp"
Marshal,
I think I may have one, I'll check later today, check back with me tomorrow.
Always Yakin,
Doug Sapp
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Marshall
Subject: Yak-List: Tach Generator
--> Yak-List message posted by: Marshall
We have a Horizon digital tach on our aircraft and we would like to remove
the Tach Generator. Does anyone make a block off plate for the tach drive
port on the engine (M14)?
Any information would be appreciated.
Thanks,
Marshall
---------------------------------
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Metal in oil |
--> Yak-List message posted by: "Jorgen Nielsen" <jorgen.nielsen@mweb.co.za>
Thanks for all the info folks - the recent cause of my chip detector
going on, was balls of metal that one could easily crush. So this must
be the lead fouling you mention. I did think it very strange at the
time, because none of the metal looked as if it had broken or chipped
off anything. Just a bit of metal dust with a couple of these tiny
balls, less than 1mm in diameter.
Regards
Jorgen
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of
cpayne@joimail.com
Subject: Yak-List: Re: Metal in oil
--> Yak-List message posted by: cpayne@joimail.com
Other metals found in Round engines:
Chrome: from rings running in steel cylinders. Looks like
shiny flakes or chips.
Silver: used to plate the master bearing. Flakes, seeing
this is serious
Lead: Used to cover and protect the silver plating on the master
bearing. Flakes may mean bearing galling. Balls of lead may be the
resultant of lead fouling in the spark plugs, common if 100LL is used.
Just check the inside bottom of the spark plugs; those balls of lead
either work their way in the plug or spill out in the crankcase, hence,
oil.
On large radials, an X-ray or ultrasound photo must be made
of the master bearing, all 360 degrees. Each OH should have
a proof photo map. Not done on our engines but can be
performed by the west coast large engine shops.
Craig Payne
==
direct advertising on the Matronics Forums.
==
==
==
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Yak-List message posted by: "Jorgen Nielsen" <jorgen.nielsen@mweb.co.za>
What is the weight saving by removing the tach generator & display
instrument?
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Doug Sapp
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: "Doug Sapp" <rvfltd@televar.com>
Tom, I have found 2 in my use stock, contact me off list-- $7.50 each.
Always Yakin,
Doug Sapp
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of tom
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: tom <ditapo@yahoo.com>
I can make a block plate for the tach generator. CNC machined and
polished for $25. I have the horizon tach as well and designed the plate
for my 55M . It will take a week or two to make a batch up.
Tom Layton
Marshall <nx4me@earthlink.net> wrote:
--> Yak-List message posted by: Marshall
Doug,
Thanks for looking. I will check back with you.
Marshall
-----Original Message-----
From: Doug Sapp
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: "Doug Sapp"
Marshal,
I think I may have one, I'll check later today, check back with me
tomorrow.
Always Yakin,
Doug Sapp
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Marshall
Subject: Yak-List: Tach Generator
--> Yak-List message posted by: Marshall
We have a Horizon digital tach on our aircraft and we would like to
remove the Tach Generator. Does anyone make a block off plate for the
tach drive port on the engine (M14)?
Any information would be appreciated.
Thanks,
Marshall
---------------------------------
==
direct advertising on the Matronics Forums.
==
==
==
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Yak-List message posted by: Marshall <nx4me@earthlink.net>
Tom,
Thanks for the offer to make us a block off plate. I would like to order one.
I am in Luxemborg on a trip but should be home next week to send you payment.
Thanks Again,
Marshall
(954)483-5049
-----Original Message-----
From: tom <ditapo@yahoo.com>
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: tom <ditapo@yahoo.com>
I can make a block plate for the tach generator. CNC machined and polished for
$25. I have the horizon tach as well and designed the plate for my 55M . It will
take a week or two to make a batch up.
Tom Layton
Marshall <nx4me@earthlink.net> wrote:
--> Yak-List message posted by: Marshall
Doug,
Thanks for looking. I will check back with you.
Marshall
-----Original Message-----
From: Doug Sapp
Subject: RE: Yak-List: Tach Generator
--> Yak-List message posted by: "Doug Sapp"
Marshal,
I think I may have one, I'll check later today, check back with me tomorrow.
Always Yakin,
Doug Sapp
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Marshall
Subject: Yak-List: Tach Generator
--> Yak-List message posted by: Marshall
We have a Horizon digital tach on our aircraft and we would like to remove
the Tach Generator. Does anyone make a block off plate for the tach drive
port on the engine (M14)?
Any information would be appreciated.
Thanks,
Marshall
---------------------------------
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Yak-List message posted by: cjpilot710@aol.com
Duane Cole has died.
Jim Goolsby
"They that can give up essential liberty to obtain a little safety,
deserve neither liberty nor safety"
Benjamin Franklin 1759
"With my shield, or on it"
Trojan Warriors BC
"The reason older men are like fine wine. When young, they are like grapes
until some woman stomps all over them."
Unknown older man.
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Yak-List message posted by: MFilucci@aol.com
Something new for our comrades, could be handy on your way to RedStar,
Sun-n-Fun, or anywhere else:
anyAWOS Provides Access to Current Weather Reports From Anywhere
A new service allows anyone to access any publicly available Automated
Weather Observing System (AWOS) or Automated Tower Information System (ATIS) via
a
toll-free number. It=E2=80=99s called anyAWOS, from Mackinac Software, LLC.=20Dial
877/any-AWOS (877/269-2967), enter any three-character airport identifier, choose
from the possible airports provided, and you=E2=80=99ll be connected to that airport=E2=80=99s
AWOS or ATIS number. The service allows users to easily access current weather
conditions nationwide, and in the case of ATIS, current airport information
such as snow removal operations notices or runway closures. (Because not all
AWOS/ASOS locations report METARs, current on-airport weather may only be
available from the AWOS.) For more information visit www.anyAWOS.com, or e-mail
info@anyAWOS.com.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|