---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 02/27/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:22 AM - Re: Cyl temps (Tom Noonan) 2. 10:59 AM - Re: LED replacments for LDG LIGHTS (Doug Sapp) 3. 06:53 PM - Re: LED replacments for LDG LIGHTS (Walt Lannon) ________________________________ Message 1 _____________________________________ Time: 05:22:36 AM PST US From: "Tom Noonan" Subject: RE: Yak-List: Cyl temps --> Yak-List message posted by: "Tom Noonan" Rob: The cylinder numbering system are listed in the maint manual. See you this weekend Tom -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Rob Mortara Subject: RE: Yak-List: Cyl temps --> Yak-List message posted by: "Rob Mortara" Any one know why cyls 3 and 6 run significantly hotter thn the others on a Huosai How can I identify the cyl #. Which are # 3 and 6 rob ________________________________ Message 2 _____________________________________ Time: 10:59:14 AM PST US From: "Doug Sapp" Subject: RE: Yak-List: LED replacments for LDG LIGHTS --> Yak-List message posted by: "Doug Sapp" Walt, I carry the GE 1864 bulbs in stock @ 1.50 each. I no longer carry the 313 bulbs for the reason you have mentioned. My stock is low right now but will have 200 more in 1 week. Always Yakin, Doug Sapp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Walt Lannon Subject: Re: Yak-List: LED replacments for LDG LIGHTS --> Yak-List message posted by: "Walt Lannon" Jay; Very interesting!!!! I have been replacing the CJ lamps with the 313 which is the T6/Harvard standard and still available but they don't seem to stand up as well as the original Chinese lamp. The Harvard has resistors in these circuits, the CJ does not. What is the difference between the 1864 and the 313? Are they readily available? Thanks. Walt ----- Original Message ----- From: "jay reiter" Subject: Re: Yak-List: LED replacments for LDG LIGHTS > --> Yak-List message posted by: "jay reiter" > > At 20 ma a 1400 ohm resistor drops 28v and disapates .56 watt. Seams that an > 1864 is less complicated. Thats why the industry and military switched from > the 327 and 313 forty years ago. > > -- Original Message ----- > From: "Aubrey Price" > To: > Subject: Re: Yak-List: LED replacments for LDG LIGHTS > > > > --> Yak-List message posted by: Aubrey Price > > > > What size resistor are you putting in series to drop the voltage. Great > > idea. Why didn't I think of it. > > Aubrey Price > > VarTec Telecom, Inc. > > > > -----Original Message----- > > From: N13472@aol.com > > To: yak-list-digest@matronics.com > > Subject: Yak-List: LED replacments for LDG LIGHTS > > > > --> Yak-List message posted by: N13472@aol.com > > > > Ref, the below, Frank if you will look in Radio Shack, Newark, Mosler, > etc. > > catalogs > > you will find LED replacements for most light bulb configurations. > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > Time: 09:12:30 AM PST US > > From: "Frank Haertlein" > > Subject: Yak-List: Gear Indicator Light Bulb > > > > --> Yak-List message posted by: "Frank Haertlein" > > > > > > Speaking of light bulbs; > > I'm taking bright white-light diodes and putting them in my yak light > > bulb (lamp) indicators like the gear and flaps. I'm breaking off the > > glass portion and soldering in the diodes. They take tens of years to > > burn out. They may just outlast your lifetime. > > > > So, to answer your question, it takes one to think of the idea for a new > > light bulb, another to actually build the product and make it work and > > one to sell it to those who want to benefit from this promising new > > product :) > > > > I'll let the list know how it turns out. > > > > > > Tom Elliott > > CJ-6 N63727 > > Sandy Valley NV > > 3L2 > > > > > > ________________________________ Message 3 _____________________________________ Time: 06:53:38 PM PST US From: "Walt Lannon" Subject: Re: Yak-List: LED replacments for LDG LIGHTS --> Yak-List message posted by: "Walt Lannon" Thanks for the info Doug. I had a call from Harold Middleton re NLG seals. Turned out I had some spares but am short of the MLG ones. He had a set of those so we are making a trade. Have a good trip to China. Best; Walt ----- Original Message ----- From: "Doug Sapp" Subject: RE: Yak-List: LED replacments for LDG LIGHTS > --> Yak-List message posted by: "Doug Sapp" > > Walt, > I carry the GE 1864 bulbs in stock @ 1.50 each. I no longer carry the 313 > bulbs for the reason you have mentioned. My stock is low right now but will > have 200 more in 1 week. > > > Always Yakin, > Doug Sapp > > -----Original Message----- > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com]On Behalf Of Walt Lannon > To: yak-list@matronics.com > Subject: Re: Yak-List: LED replacments for LDG LIGHTS > > > --> Yak-List message posted by: "Walt Lannon" > > Jay; > > Very interesting!!!! > I have been replacing the CJ lamps with the 313 which is the T6/Harvard > standard and still available but they don't seem to stand up as well as the > original Chinese lamp. > The Harvard has resistors in these circuits, the CJ does not. > What is the difference between the 1864 and the 313? Are they readily > available? Thanks. > > Walt > > > ----- Original Message ----- > From: "jay reiter" > To: > Subject: Re: Yak-List: LED replacments for LDG LIGHTS > > > > --> Yak-List message posted by: "jay reiter" > > > > At 20 ma a 1400 ohm resistor drops 28v and disapates .56 watt. Seams that > an > > 1864 is less complicated. Thats why the industry and military switched > from > > the 327 and 313 forty years ago. > > > > -- Original Message ----- > > From: "Aubrey Price" > > To: > > Subject: Re: Yak-List: LED replacments for LDG LIGHTS > > > > > > > --> Yak-List message posted by: Aubrey Price > > > > > > What size resistor are you putting in series to drop the voltage. Great > > > idea. Why didn't I think of it. > > > Aubrey Price > > > VarTec Telecom, Inc. > > > > > > -----Original Message----- > > > From: N13472@aol.com > > > To: yak-list-digest@matronics.com > > > Subject: Yak-List: LED replacments for LDG LIGHTS > > > > > > --> Yak-List message posted by: N13472@aol.com > > > > > > Ref, the below, Frank if you will look in Radio Shack, Newark, Mosler, > > etc. > > > catalogs > > > you will find LED replacements for most light bulb configurations. > > > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > > > Time: 09:12:30 AM PST US > > > From: "Frank Haertlein" > > > Subject: Yak-List: Gear Indicator Light Bulb > > > > > > --> Yak-List message posted by: "Frank Haertlein" > > > > > > > > > Speaking of light bulbs; > > > I'm taking bright white-light diodes and putting them in my yak light > > > bulb (lamp) indicators like the gear and flaps. I'm breaking off the > > > glass portion and soldering in the diodes. They take tens of years to > > > burn out. They may just outlast your lifetime. > > > > > > So, to answer your question, it takes one to think of the idea for a new > > > light bulb, another to actually build the product and make it work and > > > one to sell it to those who want to benefit from this promising new > > > product :) > > > > > > I'll let the list know how it turns out. > > > > > > > > > Tom Elliott > > > CJ-6 N63727 > > > Sandy Valley NV > > > 3L2 > > > > > > > > > > > >