---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sat 04/24/04: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:48 AM - Re: RPA (James Enkema) 2. 02:52 AM - Re: M14 Oil Filter (James Enkema) 3. 06:43 AM - And our survey says ! (Gus Fraser) 4. 06:43 AM - Low Oil Pressure (owner-yak-list-server@matronics.com) 5. 07:08 AM - Re: M14 Oil Filter ADC Oil Filter Info provided (Mark Schrick) 6. 07:35 AM - Re: M14 Oil Filter ADC Oil Filter Info provided (James Enkema) 7. 11:22 AM - [ Craig Payne ] : New Email List Photo Share Available! (Email List Photo Shares) 8. 01:10 PM - www.RPATalk.com (yak52) 9. 01:20 PM - Wikipedia Yak-52 Entry (John Alber) 10. 06:43 PM - Re: www.RPATalk.com (Terry Calloway) 11. 07:10 PM - Re: www.RPATalk.com (Gus Fraser) 12. 07:50 PM - CJ 285hp oil filter conversion (Jon Boede) 13. 09:32 PM - Re: CJ 285hp oil filter conversion - ADC Oil filter as all REDSTAR Pilots use. (Mark Schrick) ________________________________ Message 1 _____________________________________ Time: 02:48:10 AM PST US From: "James Enkema" Subject: Re: Yak-List: RPA --> Yak-List message posted by: "James Enkema" Will your User ID and PW be the same as it is for your RPA membership? Mine didn't work. Do you want a new account set up for the association forum in addition to the association home page? I tried mine ...didn't work. ----- Original Message ----- From: Subject: Yak-List: RPA > --> Yak-List message posted by: > > Folks, > > As we make improvements to the association, I will announce on the list. > > The RPA forums are now at their final location: > > www.rpatalk.com > > We are not moving away from matronics, it's a great tool, but your assoc forums allow graphically displayed individual forums and topics. Just bookmark www.rpatalk.com and when you login, just check "remember my login" and you will be auto-logged in (same goes for the associations site which now allows auto-log-in) > > The next event is ARS at Castle and it looks like we will break last years attendance record, hope to see there... > > Drew > > ________________________________ Message 2 _____________________________________ Time: 02:52:10 AM PST US From: "James Enkema" Subject: Re: Yak-List: M14 Oil Filter --> Yak-List message posted by: "James Enkema" How about a link to a web site? Thanks ----- Original Message ----- From: "Mark Schrick" Subject: RE: Yak-List: M14 Oil Filter > --> Yak-List message posted by: "Mark Schrick" > > The only filter to use is ADC Oil filters. They work great for both M-14P and > CJ engines. If you tell them Mark Schrick from RPA sent you, you get a 5% > discount for all RPA members. Support them for they donated to the RPA ALL > REDSTAR donation event. > > Good luck > > ******************************************************************** > Mark Schrick > 966 Wallace Drive > San Jose, Ca 95120-1848 > Hm/Fax 408-323-5150 > Cell 408-391-6664 > Email schrick@pacbell.net > > -----Original Message----- > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of Marshall Ekstrand > To: yak-list@matronics.com > Subject: Yak-List: M14 Oil Filter > > --> Yak-List message posted by: Marshall Ekstrand > > Does anyone have any recommendations for a oil filter for the M14? > > Thanks, > > Marshall > > ________________________________ Message 3 _____________________________________ Time: 06:43:17 AM PST US From: "Gus Fraser" Subject: Yak-List: And our survey says ! --> Yak-List message posted by: "Gus Fraser" Well ran the survey for a couple of days and here are the results. There were 32 responders and I am surprised by the Just Fly numbers. In answer to the question which do you prefer to do in your redstar aircraft the answers were:- Formation: 34.38% Just fly: 28.12% Aerobatics: 21.88% Air Combat: 15.62% I am happy to post any other questions you are interested in. Gus ________________________________ Message 4 _____________________________________ Time: 06:43:24 AM PST US From: owner-yak-list-server@matronics.com Subject: Yak-List: Low Oil Pressure --> Yak-List message posted by: Hi all I'm looking for some advice on an oil pressure problem on my Yak-52. Shortly after I got the aircraft last year, I had an incident where the oil pressure dropped during flight. I was fairly close to my home base, so I returned there as quickly as possible. The oil level was about 9 litres. I filled up to 12 litres, and the oil pressure seemed fine. On a few subsequent flights the oil pressure has dropped for a few minutes, and then returned to normal. Last week I was out practicing some aeros. The oil pressure was normal at start, and remained in the 4-5 kg/sq cm range until the end of the sortie. My last exercise was a one-turn spin. After recovery, the oil pressure had dropped right down to about 1 kg/sq cm. I check the pressure and temp prior to the start of each sequence, so this was a sudden drop during the exercise. I returned to the field immeditaely. Oil level was 9 litres. This morning I refilled to 12 litres. At startup the oil pressure was fine, going up to 5 kg/sq cm. However, as the engine warmed the oil pressure dropped. By the time I was at holding point, it had dropped to zero. I taxied back, and the oil pressure climbed back to 3 kg/sq cm drung taxi. I shut down, and checked oil level. The level was still at 12 litres. The only odd thing was that the oil appeared to have some form of froth / bubbles, visible on the dipstick. In the in-flight incidents the prop RPM has remained constant, and the oil temp has remained constant. From what I can make out, it appears that this could be due to the vent pipe clogging. Does anyone have any suggestions of other potential problems? If it is the vent pipe, what is the easiest way to clean the pipe? Blue skies Mike Beresford ZU-CWO South Africa your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html ________________________________ Message 5 _____________________________________ Time: 07:08:23 AM PST US From: "Mark Schrick" Subject: RE: Yak-List: M14 Oil Filter ADC Oil Filter Info provided --> Yak-List message posted by: "Mark Schrick" Here is the website for ADC Oil Filters. http://www.aviationdevelopment.com/cgi-local/SoftCart.100.exe/online-store/scs tore/shophome.html?E+scstore Aviation Development Corporation 1305 NW 200th Street Seattle, WA 98177 USA contact@aviationdevelopment.com (800) 944-3011: Toll-Free (206) 546-3011: Phone (206) 546-8035: Fax Call and ask for Gordon Mark "SHREK" Schrick YAK DRIVER, LLC Aerostar Dealer of (New) Yak 52TW Fully Restored USED Yak 52's "We meet anyone's budget!!! REDSTAR Pilot Assoc. SW Regional Coordinator 966 Wallace Drive San Jose, Ca 95120-1848 Hm/Fax 408-323-5150 Cell 408-391-6664 Email schrick@pacbell.net Website www.YAKDRIVER.com -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of James Enkema Subject: Re: Yak-List: M14 Oil Filter --> Yak-List message posted by: "James Enkema" How about a link to a web site? Thanks ----- Original Message ----- From: "Mark Schrick" Subject: RE: Yak-List: M14 Oil Filter > --> Yak-List message posted by: "Mark Schrick" > > The only filter to use is ADC Oil filters. They work great for both M-14P and > CJ engines. If you tell them Mark Schrick from RPA sent you, you get a 5% > discount for all RPA members. Support them for they donated to the RPA ALL > REDSTAR donation event. > > Good luck > > ******************************************************************** > Mark Schrick > 966 Wallace Drive > San Jose, Ca 95120-1848 > Hm/Fax 408-323-5150 > Cell 408-391-6664 > Email schrick@pacbell.net > > -----Original Message----- > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of Marshall Ekstrand > To: yak-list@matronics.com > Subject: Yak-List: M14 Oil Filter > > --> Yak-List message posted by: Marshall Ekstrand > > Does anyone have any recommendations for a oil filter for the M14? > > Thanks, > > Marshall ________________________________ Message 6 _____________________________________ Time: 07:35:01 AM PST US From: "James Enkema" Subject: Re: Yak-List: M14 Oil Filter ADC Oil Filter Info provided --> Yak-List message posted by: "James Enkema" Thanks again Mark for your expeditious reply! Jim ----- Original Message ----- From: "Mark Schrick" Subject: RE: Yak-List: M14 Oil Filter ADC Oil Filter Info provided > --> Yak-List message posted by: "Mark Schrick" > > Here is the website for ADC Oil Filters. > > http://www.aviationdevelopment.com/cgi-local/SoftCart.100.exe/online-store/scs > tore/shophome.html?E+scstore > > Aviation Development Corporation > 1305 NW 200th Street > Seattle, WA 98177 USA > > contact@aviationdevelopment.com > > (800) 944-3011: Toll-Free > (206) 546-3011: Phone > (206) 546-8035: Fax > > Call and ask for Gordon > > Mark "SHREK" Schrick > > YAK DRIVER, LLC > Aerostar Dealer of (New) Yak 52TW > Fully Restored USED Yak 52's "We meet anyone's budget!!! > REDSTAR Pilot Assoc. SW Regional Coordinator > 966 Wallace Drive > San Jose, Ca 95120-1848 > Hm/Fax 408-323-5150 > Cell 408-391-6664 > Email schrick@pacbell.net > Website www.YAKDRIVER.com > > -----Original Message----- > From: owner-yak-list-server@matronics.com > [mailto:owner-yak-list-server@matronics.com] On Behalf Of James Enkema > To: yak-list@matronics.com > Subject: Re: Yak-List: M14 Oil Filter > > --> Yak-List message posted by: "James Enkema" > > How about a link to a web site? Thanks > > ----- Original Message ----- > From: "Mark Schrick" > To: > Subject: RE: Yak-List: M14 Oil Filter > > > > --> Yak-List message posted by: "Mark Schrick" > > > > The only filter to use is ADC Oil filters. They work great for both M-14P > and > > CJ engines. If you tell them Mark Schrick from RPA sent you, you get a 5% > > discount for all RPA members. Support them for they donated to the RPA ALL > > REDSTAR donation event. > > > > Good luck > > > > ******************************************************************** > > Mark Schrick > > 966 Wallace Drive > > San Jose, Ca 95120-1848 > > Hm/Fax 408-323-5150 > > Cell 408-391-6664 > > Email schrick@pacbell.net > > > > -----Original Message----- > > From: owner-yak-list-server@matronics.com > > [mailto:owner-yak-list-server@matronics.com] On Behalf Of Marshall > Ekstrand > > To: yak-list@matronics.com > > Subject: Yak-List: M14 Oil Filter > > > > --> Yak-List message posted by: Marshall Ekstrand > > > > Does anyone have any recommendations for a oil filter for the M14? > > > > Thanks, > > > > Marshall > > ________________________________ Message 7 _____________________________________ Time: 11:22:30 AM PST US Subject: Yak-List: [ Craig Payne ] : New Email List Photo Share Available! From: Email List Photo Shares --> Yak-List message posted by: Email List Photo Shares A new Email List Photo Share is available: Poster: Craig Payne Subject: CJ-6 Speed Devices http://www.matronics.com/photoshare/cpayne@joimail.com.04.24.2004/index.html o Main Photo Share Index http://www.matronics.com/photoshare o Submitting a Photo Share If you wish to submit a Photo Share of your own, please include the following information along with your email message and files: 1) Email List or Lists that they are related to: 2) Your Full Name: 3) Your Email Address: 4) One line Subject description: 5) Multi-line, multi-paragraph description of topic: 6) One-line Description of each photo or file: Email the information above and your files and photos to: pictures@matronics.com ________________________________ Message 8 _____________________________________ Time: 01:10:55 PM PST US From: "yak52" Subject: Yak-List: www.RPATalk.com --> Yak-List message posted by: "yak52" Because the www.RPATalk.com forum is for everybody and not only RPA members, we decided to handle the user info separately. So to answer the question - You will have to create a new user account for now - just go to "Create a new account" please let me know at admin@flyredstar.org if you have any problems. Thanks, Deon Esterhuizen. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of James Enkema Subject: Re: Yak-List: RPA --> Yak-List message posted by: "James Enkema" Will your User ID and PW be the same as it is for your RPA membership? Mine didn't work. Do you want a new account set up for the association forum in addition to the association home page? I tried mine ...didn't work. ----- Original Message ----- From: Subject: Yak-List: RPA > --> Yak-List message posted by: > > Folks, > > As we make improvements to the association, I will announce on the list. > > The RPA forums are now at their final location: > > www.rpatalk.com > > We are not moving away from matronics, it's a great tool, but your assoc forums allow graphically displayed individual forums and topics. Just bookmark www.rpatalk.com and when you login, just check "remember my login" and you will be auto-logged in (same goes for the associations site which now allows auto-log-in) > > The next event is ARS at Castle and it looks like we will break last years attendance record, hope to see there... > > Drew > > == == == == ________________________________ Message 9 _____________________________________ Time: 01:20:25 PM PST US From: John Alber Subject: Yak-List: Wikipedia Yak-52 Entry --> Yak-List message posted by: John Alber Here's something interesting. A "wiki" is an open source document that is maintained by an interested public. The most famous wiki is the "Wikipedia," an open source encyclopedia that is both broad and of surprisingly high quality. I just made the first entry on Yak-52s. It is at: http://en.wikipedia.org/wiki/Yakovlev_Yak-52 The way wikis work is that anyone has editing rights. They depend upon public interest and integrity to correct factual errors and add to each entry. It works remarkably well. So, I invite you to have at the entry. Correct it, add to it, etc. Let's see what we get. John Alber P.S. N852GC is my plane. John Alber john@johnalber.com Home 618-675-3553 Work 314-259-2144 ________________________________ Message 10 ____________________________________ Time: 06:43:13 PM PST US From: "Terry Calloway" Subject: Re: Yak-List: www.RPATalk.com --> Yak-List message posted by: "Terry Calloway" This doesn't make any sense. yak-list is for everybody. Why support another chat board which caters to everyone. The yak-list already does a good job at that. If RPA is going to support anything, shouldn't it be for a member only chat room? I for one don't have time to follow discussions on the same subject on two different chat rooms, how can you possibly think this is a good idea? tc >>> yak52@jdlsolutions.com 4/24/2004 3:08:47 PM >>> --> Yak-List message posted by: "yak52" < yak52@jdlsolutions.com > Because the www.RPATalk.com forum is for everybody and not only RPA members, we decided to handle the user info separately. So to answer the question - You will have to create a new user account for now - just go to "Create a new account" please let me know at admin@flyredstar.org if you have any problems. Thanks, Deon Esterhuizen. ________________________________ Message 11 ____________________________________ Time: 07:10:03 PM PST US From: "Gus Fraser" Subject: Re: Yak-List: www.RPATalk.com --> Yak-List message posted by: "Gus Fraser" I agree Terry the one part that I do think is a good idea is setting up Yak list type majordomo lists for the regions. I currently host one for the NE but am happy to transfer that list to RPA if a list is set up there. This is one area where local communications on the bigger Yak list can a. Swamp the list b. Make those of us not in the region where the event or local activity is going on sad. I think that a domo list, just like this, is the best way to service this, Drew, if you guys need a hand setting these regional list up I am happy to help. The trouble with chat boards is that they are "more difficult" to get to. Gus ----- Original Message ----- From: "Terry Calloway" Subject: Re: Yak-List: www.RPATalk.com > --> Yak-List message posted by: "Terry Calloway" > > This doesn't make any sense. yak-list is for everybody. Why support > another chat board which caters to everyone. The yak-list already does > a good job at that. > > If RPA is going to support anything, shouldn't it be for a member only > chat room? > > I for one don't have time to follow discussions on the same subject on > two different chat rooms, how can you possibly think this is a good > idea? > > tc > > >>> yak52@jdlsolutions.com 4/24/2004 3:08:47 PM >>> > --> Yak-List message posted by: "yak52" < yak52@jdlsolutions.com > > > Because the www.RPATalk.com forum is for everybody and not only RPA > members, we decided to handle the user info separately. So to answer > the > question - > > You will have to create a new user account for now - just go to > "Create > a new account" please let me know at admin@flyredstar.org if you have > any problems. > > Thanks, > > Deon Esterhuizen. > > ________________________________ Message 12 ____________________________________ Time: 07:50:05 PM PST US Subject: Yak-List: CJ 285hp oil filter conversion From: "Jon Boede" --> Yak-List message posted by: "Jon Boede" Any suggestions on who to go to if I want to replace my oil "screen" system in my 285hp CJ engine with a real "filter"? Thanks, Jon ________________________________ Message 13 ____________________________________ Time: 09:32:40 PM PST US From: "Mark Schrick" Subject: RE: Yak-List: CJ 285hp oil filter conversion - ADC Oil filter as all REDSTAR Pilots use. --> Yak-List message posted by: "Mark Schrick" >Here is the website for ADC Oil Filters. They also produce Screw on oil filters > >http://www.aviationdevelopment.com/cgi-local/SoftCart.100.exe/online-st >ore/scs >tore/shophome.html?E+scstore > >Aviation Development Corporation >1305 NW 200th Street >Seattle, WA 98177 USA > >contact@aviationdevelopment.com > >(800) 944-3011: Toll-Free >(206) 546-3011: Phone >(206) 546-8035: Fax > >Call and ask for Gordon > >Mark "SHREK" Schrick > >YAK DRIVER, LLC >Aerostar Dealer of (New) Yak 52TW >Fully Restored USED Yak 52's "We meet anyone's budget!!! REDSTAR Pilot >Assoc. SW Regional Coordinator 966 Wallace Drive >San Jose, Ca 95120-1848 >Hm/Fax 408-323-5150 >Cell 408-391-6664 >Email schrick@pacbell.net >Website www.YAKDRIVER.com -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Jon Boede Subject: Yak-List: CJ 285hp oil filter conversion --> Yak-List message posted by: "Jon Boede" Any suggestions on who to go to if I want to replace my oil "screen" system in my 285hp CJ engine with a real "filter"? Thanks, Jon