---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Fri 07/28/06: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:36 AM - Photos from Russ - Oshkosh 2006 and more... (duncan1574@execpc.com) 2. 05:28 AM - Re: Photos from Russ - Oshkosh 2006 and more... (david stroud) 3. 07:02 AM - Re: Air leak psssssssss (flir47) 4. 07:13 AM - Re: Re: Air leak psssssssss (A. Dennis Savarese) ________________________________ Message 1 _____________________________________ Time: 02:36:30 AM PST US From: duncan1574@execpc.com Subject: Yak-List: Photos from Russ - Oshkosh 2006 and more... --- MIME Errors - No Plain-Text Section Found --- A message with no text/plain MIME section was received. The entire body of the message was removed. Please resend the email using Plain Text formatting. HOTMAIL is notorious for only including an HTML section in their client's default configuration. If you're using HOTMAIL, please see your email application's settings and switch to a default mail option that uses "Plain Text". --- MIME Errors No Plain-Text Section Found --- ________________________________ Message 2 _____________________________________ Time: 05:28:06 AM PST US From: "david stroud" Subject: Re: Yak-List: Photos from Russ - Oshkosh 2006 and more... Thanks for the Osh pictures Russ. Very nice to see. On the top right of page 6 of the photos, a Fokker triplane is shown. Did it have a Housai or M14P engine? If so, do you know who built or flies the plane? Thanks. David Stroud Ottawa, Canada C-FDWS Christavia Fairchild 51 early construction ----- Original Message ----- From: duncan1574@execpc.com To: yak-list@matronics.com Sent: Friday, July 28, 2006 5:34 AM Subject: Yak-List: Photos from Russ - Oshkosh 2006 and more... --> Yak-List message posted by: duncan1574@execpc.com ------------------------------------------------------------------------ From: duncan1574@execpc.com To: yak-list@matronics.com Hi. Enjoy, Russ Click on a photo below to view the entire photo album! Oshkosh 2006 ------------------------------------------------------------------------ Do you have the FREE Webshots Desktop? Add these photos to your screensaver & wallpaper! If you don't have it yet, you can download the FREE Webshots Desktop here! ========================= ========================= http://wiki.matronics.com ========================= ========================= =========== ------------------------------------------------------------------------- ----- No virus found in this incoming message. 7/26/06 ________________________________ Message 3 _____________________________________ Time: 07:02:55 AM PST US From: "flir47" Subject: Yak-List: Re: Air leak psssssssss --> Yak-List message posted by: "flir47" Ok thanks guy's. I'm gonna order the seals and give it a try. I'm kind of pressed for time..... as I wnat to sell it ASAP. It is a small leak though. Could even be the result of "lack of air tool oil" anyway you guys are great and thanks a bunch. BTW is there some sort of spring in there that will shoot out and rip off my noggin???? I have access to a complete CNC shop if I need to make some tools. Mark -------- It's not a real world war untill France surenders! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=50297#50297 ________________________________ Message 4 _____________________________________ Time: 07:13:51 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Re: Air leak psssssssss --> Yak-List message posted by: "A. Dennis Savarese" Nope! Since this is your first time disassembling them, once you get the shaft out of the cylinder, take a couple of good photos as you proceed with the removal of the seals etc. so you know precisely how it goes back together. Just a suggestion. Dennis ----- Original Message ----- Sent: Friday, July 28, 2006 9:00 AM > --> Yak-List message posted by: "flir47" > > Ok thanks guy's. I'm gonna order the seals and give it a try. I'm kind of > pressed for time..... as I wnat to sell it ASAP. It is a small leak > though. Could even be the result of "lack of air tool oil" anyway you guys > are great and thanks a bunch. BTW is there some sort of spring in there > that will shoot out and rip off my noggin???? I have access to a complete > CNC shop if I need to make some tools. > > Mark > > -------- > It's not a real world war untill France surenders! > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=50297#50297 > > >