---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 10/02/06: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:36 AM - test (bill wade) 2. 07:00 AM - (John Alber) 3. 07:48 AM - Re: (Robert Schwartz) 4. 08:49 AM - mag timing procedure for the HS6A (CJ-6A) (jblake207@comcast.net) 5. 08:51 AM - Re: (netmaster15@juno.com) 6. 10:02 AM - Re: Yak Fomation Team (vectorwarbirds@aol.com) 7. 10:18 AM - Re: Re: Yak Fomation Team (David McGirt) 8. 12:25 PM - Re: Re: (Roger Kemp) 9. 12:26 PM - Re: Re: (Roger Kemp) 10. 03:22 PM - Re: No Title (Tim Gagnon) 11. 04:22 PM - Re: (doug sapp) 12. 04:58 PM - Re: mag timing procedure for the HS6A (CJ-6A) (Craig Payne) ________________________________ Message 1 _____________________________________ Time: 04:36:48 AM PST US From: bill wade Subject: Yak-List: test test --------------------------------- Get your email and more, right on the new Yahoo.com ________________________________ Message 2 _____________________________________ Time: 07:00:53 AM PST US From: John Alber --> Yak-List message posted by: John Alber Does anyone have a Yak 50 brake latch assembly--the part that bolts on the stick and provides the latching shoulder on which the brake locking latch rests? Mine is worn. Thanks. John Alber John Alber john@johnalber.com 314-259-2144 ________________________________ Message 3 _____________________________________ Time: 07:48:46 AM PST US From: "Robert Schwartz" Subject: Yak-List: Re: --> Yak-List message posted by: "Robert Schwartz" does someone offer a carburator rebuild kit for the Yak engine, or is a new carburator the only alternative? thanks bob schwartz ________________________________ Message 4 _____________________________________ Time: 08:49:24 AM PST US From: jblake207@comcast.net Subject: Yak-List: mag timing procedure for the HS6A (CJ-6A) Can someone send the mag timing procedure for the HS6A (CJ-6A) to jblake207@comcast.net? Thanks in advance. Jon

Can someone send the mag timing procedure for the HS6A (CJ-6A) to jblake207@comcast.net? Thanks in advance. Jon

________________________________ Message 5 _____________________________________ Time: 08:51:05 AM PST US From: "netmaster15@juno.com" Subject: Yak-List: Re: John, I have a similar problem in that I have no brake latch assy. on m y yak 50 stick. If you get a response to your quest would you please for ward such info. to me. Thanks a lot. Cliff Umscheid -- John Alber wrote: --> Yak-List message posted by: John Alber Does anyone have a Yak 50 brake latch assembly--the part that bolts on the stick and provides the latching shoulder on which the brake locking latch rests? Mine is worn. Thanks. John Alber John Alber john@johnalber.com 314-259-2144 ======================== =========== ======================== =========== ======================== =========== ======================== =========== ======================== ===========

John, I have a similar problem in that I have no brake la tch assy. on my yak 50 stick. If you get a response to your quest would you please forward such info. to me. Thanks a lot.

Cliff Umscheid

-- John Alber <john@johnalber .com> wrote:
--> Yak-List message posted&nb sp;by: John Alber <john@johnalber.com>

Does& nbsp;anyone have a Yak 50 brake latch ;assembly--the part that
bolts on the stick& nbsp;and provides the latching shoulder on ;which
the brake locking latch rests? Mine&n bsp;is worn.

Thanks.

John Alber

John ======================== ======================== sp; - The Yak-List Email Forum -
Archive Search & Download, 7-Day Brow ======================== =======================
_ -= Thank you for your generous sup p; &nbs p; -Matt Dralle,&nbs ======================== =====================

________________________________ Message 6 _____________________________________ Time: 10:02:41 AM PST US Subject: Yak-List: Re: Yak Fomation Team From: vectorwarbirds@aol.com Does anyone know of a Yak Formation team out of the east? Three ship I believe. Thanks ________________________________________________________________________ Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more. ________________________________ Message 7 _____________________________________ Time: 10:18:11 AM PST US From: "David McGirt" Subject: RE: Yak-List: Re: Yak Fomation Team http://www.teamaerostar.com/ Good guys David _____ From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of vectorwarbirds@aol.com Sent: Monday, October 02, 2006 1:02 PM Subject: Yak-List: Re: Yak Fomation Team Does anyone know of a Yak Formation team out of the east? Three ship I believe. Thanks _____ size=2 width="100%" align=center> Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more. ________________________________ Message 8 _____________________________________ Time: 12:25:25 PM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: Cliff, Can you get a YAK 52 rear cockpit stick? I have one in my 50 and it works great! Actually like it better than the one in the front seat of my 52! Doc ----- Original Message ----- From: netmaster15@juno.com Sent: 10/2/2006 10:59:25 AM Subject: Yak-List: Re: John, I have a similar problem in that I have no brake latch assy. on my yak 50 stick. If you get a response to your quest would you please forward such info. to me. Thanks a lot. Cliff Umscheid -- John Alber wrote: --> Yak-List message posted by: John Alber Does anyone have a Yak 50 brake latch assembly--the part that bolts on the stick and provides the latching shoulder on which the brake locking latch rests? Mine is worn. Thanks. John Alber John ================================================sp; - The Yak-List Email Forum - ________________________________ Message 9 _____________________________________ Time: 12:26:34 PM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: --> Yak-List message posted by: "Roger Kemp" Rob Kent has a diaphram for the carb. But I am looking for a rebuild kit also. No such luck yet. Doc > [Original Message] > From: Robert Schwartz > To: > Date: 10/2/2006 9:57:23 AM > Subject: Yak-List: Re: > > --> Yak-List message posted by: "Robert Schwartz" > > does someone offer a carburator rebuild kit for the Yak engine, or is a new > carburator the only alternative? > thanks > > bob schwartz > > ________________________________ Message 10 ____________________________________ Time: 03:22:31 PM PST US Subject: Yak-List: Re: No Title From: "Tim Gagnon" --> Yak-List message posted by: "Tim Gagnon" I am having a highly experienced mechanic/fabricator looking into this very problem. I will get back to you with the results. Tim Read this topic online here: http://forums.matronics.com/viewtopic.php?p=65302#65302 ________________________________ Message 11 ____________________________________ Time: 04:22:57 PM PST US From: "doug sapp" Subject: RE: Yak-List: Yep, got that too, brand new cable in lengths of 9 foot 5 inches, also have the turn buckle end. Photos if you need em. Contact me off list rvfltd@televar.com Always Yakin, Doug Sapp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Roger Kemp Sent: Sunday, October 01, 2006 8:10 PM To: yak-list@matronics.com Subject: RE: Yak-List: Doug, I was talking about the ends that screw into the turnbuckle assemblies. The cable I am looking for is the same diametere as the control cables not the trim cable. Need it to replace a jammed fuel cutoff cable in my 50. Doc ----- Original Message ----- From: doug sapp To: yak-list@matronics.com Sent: 10/1/2006 4:53:26 PM Subject: RE: Yak-List: Doc, The H2-5400-00-1 trim cable is a piece of metric cable that measures about 36 foot 10 inches long. Don't have a clue as to rather the 52 and the CJ are the same size, but this cable mic's about 1.30MM Metric male end's????......at the risk of starting another inappropriate thread, please describe your male end. If you are talking about the end which is swaged onto the cable and screws into the turn buckle barrel, yes I have new trim turnbuckle assemblies and turnbuckle parts in stock. Unfortunately I'm not able to swage the ends at this time. Always Yakin, Doug Sapp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Roger Kemp Sent: Sunday, October 01, 2006 9:02 AM To: yak-list@matronics.com Subject: RE: Yak-List: Doug, Are the CJ controll cables the same diameter as those of the 52? Do you have the capablility of swagging them also and do you have the metric male ends? Doc ----- Original Message ----- From: doug sapp To: yak-list@matronics.com Sent: 9/30/2006 10:40:03 PM Subject: RE: Yak-List: Dennis, If you order H2-5400-00-1 it is the forward CJ6 trim cable and is simply a piece of cable without formed ends, price is $25.00, If you need the exact length let me know and I will measure it. Always Yakin, Doug Sapp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of A. Dennis Savarese Sent: Saturday, September 30, 2006 6:50 PM To: yak-list@matronics.com Subject: Re: Yak-List: the trim cables on the CJ are longer than the 52. Dennis ----- Original Message ----- From: doug sapp To: yak-list@matronics.com Sent: Saturday, September 30, 2006 8:33 PM Subject: RE: Yak-List: Bob, If they are the same as a CJ I have the trim cables in stock. Always Yakin, Doug Sapp -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of Jim Sent: Saturday, September 30, 2006 5:24 PM To: yak-list@matronics.com Subject: Re: Yak-List: Bob I made mine up for the CJ. Jim ----- Original Message ----- From: ROBERT SCHWARTZ To: yak-list@matronics.com Sent: Saturday, September 30, 2006 4:48 PM Subject: Yak-List: [LashBack] Hey Guys? I found 2 strands of my trim cable broken at the very rear at the wind up on the tail of my 52. Where can I buy the rear section of the trim cable new?? Thanks Bob Schwartz .com/Navigator?Yak-List .com/Navigator?Yak-List .com/Navigator?Yak-List ======================= .com/Navigator?Yak-List .com/Navigator?Yak-List ________________________________ Message 12 ____________________________________ Time: 04:58:49 PM PST US From: "Craig Payne" Subject: Yak-List: Re: mag timing procedure for the HS6A (CJ-6A) > Can someone send the mag timing procedure for the HS6A (CJ-6A) to >blake207@comcast.net? Thanks in advance. Jon > >on, I have a .Doc procedure with pics but it's a really big file and I only have dial-up (just a po' boy). I have been waiting for the new RPA web site to gain the functionality of the old site where articles could be posted to a tech page. No Joy yet. Craig Payne cpayne@joimail.com