---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 11/21/06: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:37 AM - Re: Warbird July Issue (David Sproule) 2. 06:43 AM - Yak-52 (Jerry Painter) 3. 07:01 AM - Yak Tools and air refill fitting??? (Kregg Victory) 4. 08:22 AM - Re: Yak Tools and air refill fitting??? (A. Dennis Savarese) 5. 08:55 AM - Re: Yak Tools and air refill fitting??? (Kregg Victory) 6. 09:03 AM - Re: Yak Tools and air refill fitting??? (Roger Kemp) 7. 09:14 AM - Re: Yak Tools and air refill fitting??? (A. Dennis Savarese) 8. 09:14 AM - Re: Yak Tools and air refill fitting??? (A. Dennis Savarese) 9. 10:05 AM - Re: Yak Tools and air refill fitting??? (Roger Kemp) 10. 06:47 PM - Seat cushions (peter waddington) ________________________________ Message 1 _____________________________________ Time: 12:37:20 AM PST US From: "David Sproule" Subject: RE: Yak-List: Warbird July Issue Hi Everyone, For a look at Ron Lee's "Best Nanchang" as it was being restored have a look at my website, www.warbirdrebuilder.com Best regards, David Sproule -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Stephen Fox Sent: November 16, 2006 10:58 AM Subject: Re: Yak-List: Warbird July Issue I just got mine as well last week. On Thursday, November 16, 2006, at 12:16PM, "Ashley Battles" wrote: > >Is everyone just now getting their July Issue of Warbird magazine from Sun N >Fun...or is it just me?? I just received 3 phone calls about this, so it >must not be... > >The mass formation is on the back cover, another formation photo on the >contents page, Ron Lee's "Best Nanchange", AND THEN a picture of the "Red >Stars in full force" on the opposite page. > > ________________________________ Message 2 _____________________________________ Time: 06:43:58 AM PST US From: "Jerry Painter" Subject: Yak-List: Yak-52 Hi Steve-- I have a Yak-52, a CJ-6A and a couple of Yak-55's for sale--all are exceptionally nice airplanes. See my website for more info and pictures. Regards, Jerry Painter Wild Blue Aviation 425-876-0865 JP@FlyWBA.com http://www.FlyWBA.com ________________________________ Message 3 _____________________________________ Time: 07:01:33 AM PST US From: "Kregg Victory" Subject: Yak-List: Yak Tools and air refill fitting??? Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg ________________________________ Message 4 _____________________________________ Time: 08:22:39 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Yak Tools and air refill fitting??? Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG&CtlgPgNbr =421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep= 610450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C&Return Page=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory To: 'Yak List' Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg ________________________________ Message 5 _____________________________________ Time: 08:55:00 AM PST US From: "Kregg Victory" Subject: RE: Yak-List: Yak Tools and air refill fitting??? Thanks but, I need the fitting (the cover plate) that twists onto the side of the fuse, before I can start attaching valves? Kregg _____ From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Savarese Sent: Tuesday, November 21, 2006 8:22 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG &CtlgPgNbr=421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep=6 10450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C &ReturnPage=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/chref "http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navig ator?Yak-List ________________________________ Message 6 _____________________________________ Time: 09:03:32 AM PST US From: "Roger Kemp" Subject: Re: Yak-List: Yak Tools and air refill fitting??? The schrader #1 or #4 valve? I need one for the 50. Doc ----- Original Message ----- From: A. Dennis Savarese Sent: 11/21/2006 10:35:28 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG&CtlgPgNbr=421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep=610450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C&ReturnPage=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List ________________________________ Message 7 _____________________________________ Time: 09:14:27 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Yak Tools and air refill fitting??? Oh! Without the cover plate, my solution won't work. Dennis ----- Original Message ----- From: Kregg Victory To: yak-list@matronics.com Sent: Tuesday, November 21, 2006 10:54 AM Subject: RE: Yak-List: Yak Tools and air refill fitting??? Thanks but, I need the fitting (the cover plate) that twists onto the side of the fuse, before I can start attaching valves? Kregg ------------------------------------------------------------------------- ----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Savarese Sent: Tuesday, November 21, 2006 8:22 AM To: yak-list@matronics.com Subject: Re: Yak-List: =ashBack] Yak Tools and air refill fitting??? Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG&CtlgPgNbr =421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep= 610450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C&Return Page=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory To: 'Yak List' Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg href="http://www.aeroelectric.com">www.aeroelectric.comhref="http://w ww.buildersbooks.com">www.buildersbooks.comhref="http://www.kitlog.com" >www.kitlog.comhref="http://www.homebuilthelp.com">www.homebuilthelp.co mhref="http://www.matronics.com/contribution">http://www.matronics.com/ chref="http://www.matronics.com/Navigator?Yak-List">http://www.matronic s.com/Navigator?Yak-List www.aeroelectric.comwww.kitlog.comhttp://www.matronics.com/Navigator?Yak- List ________________________________ Message 8 _____________________________________ Time: 09:14:32 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Yak Tools and air refill fitting??? I have them at the hangar. Dennis ----- Original Message ----- From: Roger Kemp To: yak-list@matronics.com Sent: Tuesday, November 21, 2006 11:03 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? The schrader #1 or #4 valve? I need one for the 50. Doc ----- Original Message ----- From: A. Dennis Savarese To: yak-list@matronics.com Sent: 11/21/2006 10:35:28 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? [LashBack] Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG&CtlgPgNbr =421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep= 610450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C&Return Page=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory To: 'Yak List' Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? [LashBack] Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics .com/Navigator?Yak-List ________________________________ Message 9 _____________________________________ Time: 10:05:33 AM PST US From: "Roger Kemp" Subject: Re: Yak-List: Yak Tools and air refill fitting??? O'Tay' Buckwheat! doc ----- Original Message ----- From: A. Dennis Savarese Sent: 11/21/2006 11:34:18 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? I have them at the hangar. Dennis ----- Original Message ----- From: Roger Kemp Sent: Tuesday, November 21, 2006 11:03 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? The schrader #1 or #4 valve? I need one for the 50. Doc ----- Original Message ----- From: A. Dennis Savarese Sent: 11/21/2006 10:35:28 AM Subject: Re: Yak-List: Yak Tools and air refill fitting??? [LashBack] Buy a Schrader valve fitting, 1/8" NPT threads, drill and tap the cover plate in the center, and install the Schrader valve. Remove the valve core from the Schrader valve. You don't need it. http://www.mcmaster.com/ctlg/DisplCtlgPage.asp?ReqTyp=CATALOG&CtlgPgNbr=421&RelatedCtlgPgs=421,1106&term=Schrader+Air+Valves&sesnextrep=610450177804958&ScreenWidth=1280&McMMainWidth=821 Then buy this coupler/adapter from Aircraft Tool Supply and mount it to the air hose that attaches to your high pressure air tank. http://www.aircraft-tool.com/shop/detail.aspx?PRODUCT_ID=SK2043C&ReturnPage=/shop/flyer.aspx?PageNo=1 Dennis ----- Original Message ----- From: Kregg Victory Sent: Tuesday, November 21, 2006 9:01 AM Subject: Yak-List: Yak Tools and air refill fitting??? [LashBack] Anyone have a set of yak tools and/or the adapter fitting for connecting a hose the fuse for refilling the air in the bottles? If so, contact me off line. Thanks, Kregg href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List ________________________________ Message 10 ____________________________________ Time: 06:47:06 PM PST US From: "peter waddington" Subject: Yak-List: Seat cushions Looking to have a set of cushions made for our CJ-6. As we are still waiting delivery of the airplane, can anyone of you guys help supply dimensions for the seats, front and back. Seat depth would also help. In addition any advice regarding materials for both the exterior cover and interior foam core. Thanks Pete _________________________________________________________________ Experience Live Search from your PC or mobile device today. http://www.live.com/?mkt=en-ca ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.