Today's Message Index:
----------------------
1. 09:29 AM - Re: Recommendations for oil filter system (Doug Sapp)
2. 10:24 AM - Kt76C (Doug Sapp)
3. 10:27 AM - Re: Recommendations for oil filter system (Samuel Sax)
4. 11:04 AM - Re: FAST Card Expiration (Shane Golden)
5. 07:18 PM - Re: FAST Card Expiration (Samuel Sax)
6. 09:15 PM - Re: Recommendations for oil filter system (Walter Lannon)
7. 09:19 PM - Re: FAST Card Expiration (Shane Golden)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Recommendations for oil filter system |
Sam,
Does that filter head have a high pressure bypass valve on it?
Always Yakin,
Doug Sapp
Samuel Sax wrote:
>
>
>Hi Dennis,
>
>I hope all is well with you and yours.
>
>I am using a standard Champion CH48109. The oil filter adapter is from J.C
>Whitney and is listed in their catalog as: Oil Filter Relocation kit, part
>#14DY6174A. Price is about $50.00 for the kit which included other stuff
>you won't need. I have it mounted on the firewall on the right side between
>the firewall's edge and the air starter - perfect location (at least for
>me). You will need 2ea -12 90degrees angled fitting (one of them on a
>swivel) and the male-to-male threaded adaptor (to accept the CH-4801) - this
>is a standard threaded adaptor.
>
>The filter is mounted inverted, thus minimizing oil spills at change time.
>It's been working great for the past 5 years.
>
>Happy Holidays to All Red Star lovers!
>
>Sam Sax
>Miami, FL
>
>
>-----Original Message-----
>From: owner-yak-list-server@matronics.com
>[mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Savarese
>Sent: Monday, December 11, 2006 8:37 AM
>To: yak-list@matronics.com
>Subject: Yak-List: Recommendations for oil filter system
>
><dsavarese@elmore.rr.com>
>
>CJ6's with M14P's - I am looking for information on which spin on oil filter
>
>system you have added to your airplane. Any photos will also be very
>helpful.
>Thanks for your input.
>Dennis
>
>A. Dennis Savarese
>334-285-2141 (office)
>334-546-8182 (cell)
>www.yak-52.com
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Any one out there have the wiring pin out for a 28 volt KT76C?
And if we are counting votes, Air Wolf is the best and they do support
Red Star, we should consider them when choosing a oil filter.
Always Yakin,
Doug Sapp
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Recommendations for oil filter system |
Hi Doug,
Yes, it does. The Champion Oil Filter is a FAA approved filter widely used
on many aircraft. The high pressure bypass is an FAA requirement for it to
be certified for aviation use. This is an important point and one of the
reasons I went with this type oil filter.
Sam Sax
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Doug Sapp
Sent: Tuesday, December 12, 2006 11:54 AM
Subject: Re: Yak-List: Recommendations for oil filter system
Sam,
Does that filter head have a high pressure bypass valve on it?
Always Yakin,
Doug Sapp
Samuel Sax wrote:
>
>
>Hi Dennis,
>
>I hope all is well with you and yours.
>
>I am using a standard Champion CH48109. The oil filter adapter is from J.C
>Whitney and is listed in their catalog as: Oil Filter Relocation kit, part
>#14DY6174A. Price is about $50.00 for the kit which included other stuff
>you won't need. I have it mounted on the firewall on the right side
between
>the firewall's edge and the air starter - perfect location (at least for
>me). You will need 2ea -12 90degrees angled fitting (one of them on a
>swivel) and the male-to-male threaded adaptor (to accept the CH-4801) -
this
>is a standard threaded adaptor.
>
>The filter is mounted inverted, thus minimizing oil spills at change time.
>It's been working great for the past 5 years.
>
>Happy Holidays to All Red Star lovers!
>
>Sam Sax
>Miami, FL
>
>
>-----Original Message-----
>From: owner-yak-list-server@matronics.com
>[mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis
Savarese
>Sent: Monday, December 11, 2006 8:37 AM
>To: yak-list@matronics.com
>Subject: Yak-List: Recommendations for oil filter system
>
><dsavarese@elmore.rr.com>
>
>CJ6's with M14P's - I am looking for information on which spin on oil
filter
>
>system you have added to your airplane. Any photos will also be very
>helpful.
>Thanks for your input.
>Dennis
>
>A. Dennis Savarese
>334-285-2141 (office)
>334-546-8182 (cell)
>www.yak-52.com
>
>
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | FAST Card Expiration |
Nope
They come to me. The new FPR with my address is on the website.
http://www.flyredstar.org/T_Formation.aspx
Shane
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Rob Mortara
Sent: Monday, December 11, 2006 10:53 PM
Subject: RE: Yak-List: FAST Card Expiration
Do we still send them to Mike?
Rob
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Shane Golden
Sent: Monday, December 11, 2006 4:21 PM
Subject: Yak-List: FAST Card Expiration
Gentlemen (Ladies also)
If you have not submitted and FPR for 2006 please do so ASAP!!! I'm about
to send all the info to the card vendor so if you have not submitted an FPR
you will not receive a card with FAST credentials on the back.
If you have questions contact me off list.
Thanks,
Shane Golden
www.aeroelectric.com
www.buildersbooks.com
www.kitlog.com
www.homebuilthelp.com
http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Yak-List
www.aeroelectric.com
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | FAST Card Expiration |
Hi Shane,
Please wait for my form. I should have it no later than tomorrow
(including the membership/FAST dues).
Thanks much,
Sam
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Shane Golden
Sent: Tuesday, December 12, 2006 1:25 PM
Subject: RE: Yak-List: FAST Card Expiration
Nope
They come to me. The new FPR with my address is on the website.
http://www.flyredstar.org/T_Formation.aspx
Shane
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Rob Mortara
Sent: Monday, December 11, 2006 10:53 PM
Subject: RE: Yak-List: FAST Card Expiration
Do we still send them to Mike?
Rob
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Shane Golden
Sent: Monday, December 11, 2006 4:21 PM
Subject: Yak-List: FAST Card Expiration
Gentlemen (Ladies also)
If you have not submitted and FPR for 2006 please do so ASAP!!! I'm about
to send all the info to the card vendor so if you have not submitted an FPR
you will not receive a card with FAST credentials on the back.
If you have questions contact me off list.
Thanks,
Shane Golden
www.aeroelectric.com
www.kitlog.com
http://www.matronics.com/Navigator?Yak-List
www.aeroelectric.com
www.aeroelectric.com
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Recommendations for oil filter system |
Good point Sam.
The Champion (or other) certificated filter is also strong enough to
withstand scavenge pump pressure on radial or other dry sump engines.
Scavenge pressure is unregulated and in certain conditions may reach 300
psi.
Walt
----- Original Message -----
From: "Samuel Sax" <cd001633@mindspring.com>
Sent: Tuesday, December 12, 2006 10:27 AM
Subject: RE: Yak-List: Recommendations for oil filter system
>
> Hi Doug,
>
> Yes, it does. The Champion Oil Filter is a FAA approved filter widely
> used
> on many aircraft. The high pressure bypass is an FAA requirement for it
> to
> be certified for aviation use. This is an important point and one of the
> reasons I went with this type oil filter.
>
> Sam Sax
>
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Doug Sapp
> Sent: Tuesday, December 12, 2006 11:54 AM
> To: yak-list@matronics.com
> Subject: Re: Yak-List: Recommendations for oil filter system
>
>
> Sam,
> Does that filter head have a high pressure bypass valve on it?
>
> Always Yakin,
> Doug Sapp
>
>
> Samuel Sax wrote:
>
>>
>>
>>Hi Dennis,
>>
>>I hope all is well with you and yours.
>>
>>I am using a standard Champion CH48109. The oil filter adapter is from
>>J.C
>>Whitney and is listed in their catalog as: Oil Filter Relocation kit, part
>>#14DY6174A. Price is about $50.00 for the kit which included other stuff
>>you won't need. I have it mounted on the firewall on the right side
> between
>>the firewall's edge and the air starter - perfect location (at least for
>>me). You will need 2ea -12 90degrees angled fitting (one of them on a
>>swivel) and the male-to-male threaded adaptor (to accept the CH-4801) -
> this
>>is a standard threaded adaptor.
>>
>>The filter is mounted inverted, thus minimizing oil spills at change time.
>>It's been working great for the past 5 years.
>>
>>Happy Holidays to All Red Star lovers!
>>
>>Sam Sax
>>Miami, FL
>>
>>
>>
>>-----Original Message-----
>>From: owner-yak-list-server@matronics.com
>>[mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis
> Savarese
>>Sent: Monday, December 11, 2006 8:37 AM
>>To: yak-list@matronics.com
>>Subject: Yak-List: Recommendations for oil filter system
>>
>><dsavarese@elmore.rr.com>
>>
>>CJ6's with M14P's - I am looking for information on which spin on oil
> filter
>>
>>system you have added to your airplane. Any photos will also be very
>>helpful.
>>Thanks for your input.
>>Dennis
>>
>>A. Dennis Savarese
>>334-285-2141 (office)
>>334-546-8182 (cell)
>>www.yak-52.com
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | FAST Card Expiration |
No problem.
Shane
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Samuel Sax
Sent: Tuesday, December 12, 2006 10:17 PM
Subject: RE: Yak-List: FAST Card Expiration
Hi Shane,
Please wait for my form. I should have it no later than tomorrow
(including the membership/FAST dues).
Thanks much,
Sam
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Shane Golden
Sent: Tuesday, December 12, 2006 1:25 PM
Subject: RE: Yak-List: FAST Card Expiration
Nope
They come to me. The new FPR with my address is on the website.
http://www.flyredstar.org/T_Formation.aspx
Shane
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Rob Mortara
Sent: Monday, December 11, 2006 10:53 PM
Subject: RE: Yak-List: FAST Card Expiration
Do we still send them to Mike?
Rob
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Shane Golden
Sent: Monday, December 11, 2006 4:21 PM
Subject: Yak-List: FAST Card Expiration
Gentlemen (Ladies also)
If you have not submitted and FPR for 2006 please do so ASAP!!! I'm about
to send all the info to the card vendor so if you have not submitted an FPR
you will not receive a card with FAST credentials on the back.
If you have questions contact me off list.
Thanks,
Shane Golden
www.aeroelectric.com
www.buildersbooks.com
www.kitlog.com
www.homebuilthelp.com
http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Yak-List
<http://www.aeroelectric.com> www.aeroelectric.com
www.aeroelectric.com
www.aeroelectric.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|