Today's Message Index:
----------------------
1. 04:58 AM - Re: rough running engine (A. Dennis Savarese)
2. 05:51 AM - Military gear for sale (Cj6sly@cs.com)
3. 06:02 AM - Re: Military gear for sale (cjpilot710@aol.com)
4. 06:30 AM - Jeep M38A1 (Kelley Monroe)
5. 06:54 AM - RedStar events (Drew Blahnick)
6. 07:35 AM - Re: RedStar events (Roger Kemp)
7. 07:54 AM - Re: rough running engine (Don Milbourn)
8. 08:05 AM - Re: rough running engine (A. Dennis Savarese)
9. 12:25 PM - Re: name tags (Phil Goswick)
10. 12:28 PM - name tags (Phil Goswick)
11. 12:33 PM - Re: name tags (Ashley Battles)
12. 12:36 PM - Re: name tags (Ashley Battles)
13. 12:43 PM - Re: name tags (David McGirt)
14. 12:46 PM - Re: name tags (ByronMFox@aol.com)
15. 12:55 PM - Re: name tags (Ashley Battles)
16. 12:56 PM - Emailing: Mail0012 (Phil Goswick)
17. 12:56 PM - Emailing: Mail0012 (Phil Goswick)
18. 01:02 PM - Re: Emailing: Mail0012 (Ashley Battles)
19. 02:52 PM - Re: Emailing: Mail0012 (ByronMFox@aol.com)
20. 03:30 PM - yak52 gear & flap rebuild/seal kits (David McGirt)
21. 06:48 PM - Re: name tags (Sarah Tobin)
22. 08:02 PM - Re: name tags (john Fischer)
23. 08:18 PM - Re: yak52 gear & flap rebuild/seal kits (Roger Kemp)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: rough running engine |
Good post Don. What condition did you find the intake gland nut rubber
seals?
Dennis
----- Original Message -----
From: Don Milbourn
To: yak-list@matronics.com
Sent: Tuesday, January 02, 2007 11:46 PM
Subject: Yak-List: rough running engine
Hi everyone, I am new to this yak list, but I have been flying and
maintaining my Yak for the past two years. For the past several months I
have experienced an intermittent "rough running" engine. At first I
thought it could be carb-ice, but nope... Then, I thought maybe it could
be the spark plug wires, new plug wires answered that question... nope.
I still had a rough running engine. It seemed it was more prone to the
problem in colder air temperatures (40F). It would happen
intermittently, occasionally it has happened on climb out, but it would
also happened at cruise and even on the ground, at all throttle
settings. Generally when it happened at cruise speed, you could feel it
start to come on, it would start with a slight vibration and then a
violent vibration that would shake the instrument panel, sometimes with
a backfire, and then smooth out and run ok until next time. The duration
of the rough running was usually less than 5 seconds, not really long
enough time to trouble shoot it.... Finely, the other day it did it four
times. I was able to do a mag check this time and it had no change. When
the cyl temp would cool to 160 or so it would mis-fire. If you keep it
at 190 it was better, but it would still happen. So, if you let the CHT
cool down to 160, you could count on the chance of "chili" in your
shorts if you weren't ready for it... Then, I replaced the intake gland
seals... and no more misfire!!! I have been out several times since
replacing the Gland Seals, trying to make it mis-fire (allowing the CHT
down to 160) and it seems the problem has been fixed!! . The gland nuts
were tight but they would not seal, when they got warm they would seal.
It runs smoother has better idle . Turns out to be the single cheapest
thing with the best improvement I have done to my yak
Don Milbourn
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Military gear for sale |
Yakistas,
I've got some stuff for sale if anyone is interested:
1 ea.,Green Nomex Flight Suit 42R, worn but in new condition. Still has that
Nomex smell! =$45.00 +Shipping
2 ea New Air Force Black Flight Boots (never worn, still in boxes), size 11=
$30.00 Each + Shipping
2 ea. New Jungle Boots size 11 (never worn) $25.00 =+ shipping
Contact me off list at cj6sly@cs.com
Skp Slyfield
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Military gear for sale |
In a message dated 1/3/2007 8:53:10 A.M. Eastern Standard Time,
Cj6sly@cs.com writes:
Gee Sly I've been looking for a left size 11 jungle boot for months. I'll
send you $12.500 for it!
Yakistas,
I've got some stuff for sale if anyone is interested:
1 ea.,Green Nomex Flight Suit 42R, worn but in new condition. Still has that
Nomex smell! =$45.00 +Shipping
2 ea New Air Force Black Flight Boots (never worn, still in boxes), size 11=
$30.00 Each + Shipping
2 ea. New Jungle Boots size 11 (never worn) $25.00 =+ shipping
Contact me off list at cj6sly@cs.com
Skp Slyfield
(http://www.matronics.com/Navigator?Yak-List)
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I have a M38A1 Jeep for sale. This Jeep has had a complete frame off
restoration and used to transport warbird pilots at Oshkosh. The last
to years has been in the American Wings Museum at ANE. If interested
contact me off list. Thanks Kelley 612-508-3740
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Pilotos'-
Definately put your fly-ins on the fly-in module of www.flyredstar.org if you can, I get all email from admin@flyredstar.org and get a lot of "whens that california event", "any events in alabama in 2007", "is there anything up in my area...I looked online but..."
So it means the system is useful and new members are looking,
thanks,
Drew
Drew A. Blahnick
RedStar Pilots Association
__________________________________________________
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Garbled in transmission. Please retransmit.
Doc
----- Original Message -----
From: Drew Blahnick
Sent: 1/3/2007 9:02:23 AM
Subject: Yak-List: RedStar events
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: rough running engine |
Dennis, they looked old and dry. ----- Original Message -----
From: A. Dennis Savarese
To: yak-list@matronics.com
Sent: Wednesday, January 03, 2007 5:57 AM
Subject: Re: Yak-List: rough running engine
Good post Don. What condition did you find the intake gland nut
rubber seals?
Dennis
----- Original Message -----
From: Don Milbourn
To: yak-list@matronics.com
Sent: Tuesday, January 02, 2007 11:46 PM
Subject: Yak-List: rough running engine
Hi everyone, I am new to this yak list, but I have been flying and
maintaining my Yak for the past two years. For the past several months I
have experienced an intermittent "rough running" engine. At first I
thought it could be carb-ice, but nope... Then, I thought maybe it could
be the spark plug wires, new plug wires answered that question... nope.
I still had a rough running engine. It seemed it was more prone to the
problem in colder air temperatures (40F). It would happen
intermittently, occasionally it has happened on climb out, but it would
also happened at cruise and even on the ground, at all throttle
settings. Generally when it happened at cruise speed, you could feel it
start to come on, it would start with a slight vibration and then a
violent vibration that would shake the instrument panel, sometimes with
a backfire, and then smooth out and run ok until next time. The duration
of the rough running was usually less than 5 seconds, not really long
enough time to trouble shoot it.... Finely, the other day it did it four
times. I was able to do a mag check this time and it had no change. When
the cyl temp would cool to 160 or so it would mis-fire. If you keep it
at 190 it was better, but it would still happen. So, if you let the CHT
cool down to 160, you could count on the chance of "chili" in your
shorts if you weren't ready for it... Then, I replaced the intake gland
seals... and no more misfire!!! I have been out several times since
replacing the Gland Seals, trying to make it mis-fire (allowing the CHT
down to 160) and it seems the problem has been fixed!! . The gland nuts
were tight but they would not seal, when they got warm they would seal.
It runs smoother has better idle . Turns out to be the single cheapest
thing with the best improvement I have done to my yak
Don Milbourn
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics
.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: rough running engine |
I know this question is after the fact, but when you felt the vibration
did you happen to see any change in the manifold pressure?
Dennis
----- Original Message -----
From: Don Milbourn
To: yak-list@matronics.com
Sent: Wednesday, January 03, 2007 9:54 AM
Subject: Re: Yak-List: rough running engine
Dennis, they looked old and dry. ----- Original Message -----
From: A. Dennis Savarese
To: yak-list@matronics.com
Sent: Wednesday, January 03, 2007 5:57 AM
Subject: Re: Yak-List: rough =ashBack] running engine
Good post Don. What condition did you find the intake gland nut
rubber seals?
Dennis
----- Original Message -----
From: Don Milbourn
To: yak-list@matronics.com
Sent: Tuesday, January 02, 2007 11:46 PM
Subject: Yak-List: rough =ashBack] running engine
Hi everyone, I am new to this yak list, but I have been flying and
maintaining my Yak for the past two years. For the past several months I
have experienced an intermittent "rough running" engine. At first I
thought it could be carb-ice, but nope... Then, I thought maybe it could
be the spark plug wires, new plug wires answered that question... nope.
I still had a rough running engine. It seemed it was more prone to the
problem in colder air temperatures (40F). It would happen
intermittently, occasionally it has happened on climb out, but it would
also happened at cruise and even on the ground, at all throttle
settings. Generally when it happened at cruise speed, you could feel it
start to come on, it would start with a slight vibration and then a
violent vibration that would shake the instrument panel, sometimes with
a backfire, and then smooth out and run ok until next time. The duration
of the rough running was usually less than 5 seconds, not really long
enough time to trouble shoot it.... Finely, the other day it did it four
times. I was able to do a mag check this time and it had no change. When
the cyl temp would cool to 160 or so it would mis-fire. If you keep it
at 190 it was better, but it would still happen. So, if you let the CHT
cool down to 160, you could count on the chance of "chili" in your
shorts if you weren't ready for it... Then, I replaced the intake gland
seals... and no more misfire!!! I have been out several times since
replacing the Gland Seals, trying to make it mis-fire (allowing the CHT
down to 160) and it seems the problem has been fixed!! . The gland nuts
were tight but they would not seal, when they got warm they would seal.
It runs smoother has better idle . Turns out to be the single cheapest
thing with the best improvement I have done to my yak
Don Milbourn
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronhre
f="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics
.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
recently there was a post showing a name tag with the red star and the
Yak wings. Does any one know where these came from so I may order some
Phil
Yak 52
Tulsa, Ok
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
does any one know where the name tags with the red star and yak wings
came from. I would like to order some.
Phil
Yak 52
Tulsa, Ok
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Phil,
Try these links. If they don't work, go to www.nametags4u.com. The actual
Russian wings are under the International link. The RPA wings are under the
Misc. link.
Yak wings
http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT&cat=nations
RedStar wings
http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT&cat=misc
Miss flying with you guys!
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Phil Goswick
Sent: Wednesday, January 03, 2007 2:28 PM
To: yak-list@matronics.com
Subject: Yak-List: name tags
does any one know where the name tags with the red star and yak wings came
from. I would like to order some.
Phil
Yak 52
Tulsa, Ok
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
And don't be fooled by the first set of wings you come to that say "Navy
wings with Red Star". Keep scrolling down and there is a set of silver
wings that says "RedStar Pilots Association wings"
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Phil Goswick
Sent: Wednesday, January 03, 2007 2:28 PM
To: yak-list@matronics.com
Subject: Yak-List: name tags
does any one know where the name tags with the red star and yak wings came
from. I would like to order some.
Phil
Yak 52
Tulsa, Ok
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
In case you are the naval type..
http://www.nametags4u.com/cgi-bin/lwwlist.cgi?pm=VB
<http://www.nametags4u.com/cgi-bin/lwwlist.cgi?pm=VB&img=misc_soviet>
&img=misc_soviet
_____
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Ashley Battles
Sent: Wednesday, January 03, 2007 3:36 PM
Subject: RE: Yak-List: name tags
Phil,
Try these links. If they don't work, go to www.nametags4u.com. The actual
Russian wings are under the International link. The RPA wings are under the
Misc. link.
Yak wings
<http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT&cat=nations>
http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT&cat=nations
RedStar wings
http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT
<http://www.nametags4u.com/cgi-bin/wwlist.cgi?pm=LISTCAT&cat=misc> &cat=misc
Miss flying with you guys!
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Phil Goswick
Sent: Wednesday, January 03, 2007 2:28 PM
Subject: Yak-List: name tags
does any one know where the name tags with the red star and yak wings came
from. I would like to order some.
Phil
Yak 52
Tulsa, Ok
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/
Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
In a message dated 1/3/07 12:27:10 PM, p.goswick@cox.net writes:
>
> recently there was a post showing a name tag with the red star and the Yak
> wings.- Does any one know where these came from so I may order some
>
> Phil
>
>
While Ashley has correctly directed you to RPA specific wings at Williams &
Williams, Phil, I do recall someone weeks ago asking about Yak 52 specific
wings. If we can locate the art work, Williams & Williams will duplicate it,
and
put the wings on their web site just as they did with our RPA wings. Please
let
me know if you succeed in locating the art.
Blitz
Byron M Fox
The RPA Store
80 Milland Drive
Mill Valley, CA 94941
415-307-2405 Cell Days
415-380-0907 Home Eves
http://www.flyredstar.org/StoreCSVS/default.aspx
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
http://www.yakclub.com/images/shop/namebadge.gif
Is this the artwork for the Yak specific wings you are talking about Blitz?
Can you tell I already had all this stuff bookmarked! This would be cool to
have Williams & Williams duplicate. Do you have contact info for them to
send it to them?
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of ByronMFox@aol.com
Sent: Wednesday, January 03, 2007 2:46 PM
To: yak-list@matronics.com
Subject: Re: Yak-List: name tags
In a message dated 1/3/07 12:27:10 PM, p.goswick@cox.net writes:
recently there was a post showing a name tag with the red star and the
Yak wings. Does any one know where these came from so I may order some
Phil
While Ashley has correctly directed you to RPA specific wings at Williams
& Williams, Phil, I do recall someone weeks ago asking about Yak 52 specific
wings. If we can locate the art work, Williams & Williams will duplicate it,
and put the wings on their web site just as they did with our RPA wings.
Please let me know if you succeed in locating the art.
Blitz
Byron M Fox
The RPA Store
80 Milland Drive
Mill Valley, CA 94941
415-307-2405 Cell Days
415-380-0907 Home Eves
http://www.flyredstar.org/StoreCSVS/default.aspx
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: Mail0012 |
this is the name tag that I saw and would like to purchase
Phil
Tulsa
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: Mail0012 |
this is the name tag that I saw and would like to purchase
Phil
Tulsa
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Emailing: Mail0012 |
http://www.yakclub.com/images/shop/namebadge.gif
I don't think there is anyplace to purchase this one yet...but if Blitz
knows how to get some artwork to Williams & Williams, they could make it for
us...no telling what the time frame would be though
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com]On Behalf Of Phil Goswick
Sent: Wednesday, January 03, 2007 2:56 PM
To: yak-list@matronics.com
Subject: Yak-List: Emailing: Mail0012
this is the name tag that I saw and would like to purchase
Phil
Tulsa
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Emailing: Mail0012 |
In a message dated 1/3/07 1:05:09 PM, ashley.battles@aircapitalins.com
writes:
>
> http://www.yakclub.com/images/shop/namebadge.gif
>
> -
>
> I don't think there is anyplace to purchase this one yet...but if Blitz
> knows how to get some artwork to Williams & Williams, they could make it f
or
> us...no telling what the time frame would be though
>
>
There's an 800 number at the bottom of Williams & Williams home page. I
called that number when arranging for the RPA wings to be put on their site.
The fellow, who's name I can't recall, was very helpful. ...Blitz
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | yak52 gear & flap rebuild/seal kits |
Anyone happen to have some rebuild/seal kits on the shelf? Jill is out
playing like they have a life on vacation, and I need to get these sooner
than later. Email me off list if you like - thanks all
David
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I wrote to several name tag companies and they said they could do it for me for
12 bucks for 1 or 2, can't remember, but if I order more that ten orders, it's
only 10 bucks, but not sure about the shipping aspect of that, but maybe you
could send it to one of your Red Star gatherings.
Smash
Ashley Battles <ashley.battles@aircapitalins.com> wrote:
http://www.yakclub.com/images/shop/namebadge.gif
Is this the artwork for the Yak specific wings you are talking about Blitz?
Can you tell I already had all this stuff bookmarked! This would be cool to have
Williams & Williams duplicate. Do you have contact info for them to send
it to them?
-----Original Message-----
From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On Behalf Of ByronMFox@aol.com
Sent: Wednesday, January 03, 2007 2:46 PM
Subject: Re: Yak-List: name tags
In a message dated 1/3/07 12:27:10 PM, p.goswick@cox.net writes:
recently there was a post showing a name tag with the red star and the Yak wings.
Does any one know where these came from so I may order some
Phil
While Ashley has correctly directed you to RPA specific wings at Williams & Williams,
Phil, I do recall someone weeks ago asking about Yak 52 specific wings.
If we can locate the art work, Williams & Williams will duplicate it, and put
the wings on their web site just as they did with our RPA wings. Please let me
know if you succeed in locating the art.
Blitz
Byron M Fox
The RPA Store
80 Milland Drive
Mill Valley, CA 94941
415-307-2405 Cell Days
415-380-0907 Home Eves
http://www.flyredstar.org/StoreCSVS/default.aspx
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List href="http://forums.matronics.com">http://forums.matronics.com
__________________________________________________
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Group,
After Sara asked the last time, I went to my local embroidery shop and had the
design work done to make the name tags. I have not had a chance to get back
and pick up the sample I had made.
I will pick it up tomorrow and post digital photos for the group. I can sell
them for $10.00 ea, with no min purchase.
Thats about $1.50 for my time to drop off the order and ship for each purchase.
Thanks
John fischer
California City, CA
Cell (818) 257-0911
>
>I wrote to several name tag companies and they said they could do it for me
for 12 bucks for 1 or 2, can't remember, but if I order more that ten orders,
it's only 10 bucks, but not sure about the shipping aspect of that, but maybe
you could send it to one of your Red Star gatherings.
>
> Smash
>
>Ashley Battles <ashley.battles@aircapitalins.com> wrote:
> http://www.yakclub.com/images/shop/namebadge.gif
>
> Is this the artwork for the Yak specific wings you are talking about Blitz?
Can you tell I already had all this stuff bookmarked! This would be cool to
have Williams & Williams duplicate. Do you have contact info for them to send
it to them?
> -----Original Message-----
>From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com]On
Behalf Of ByronMFox@aol.com
>Sent: Wednesday, January 03, 2007 2:46 PM
>To: yak-list@matronics.com
>Subject: Re: Yak-List: name tags
>
>
>In a message dated 1/3/07 12:27:10 PM, p.goswick@cox.net writes:
>
>
>
>recently there was a post showing a name tag with the red star and the Yak
wings. Does any one know where these came from so I may order some
>
>Phil
>
>
>While Ashley has correctly directed you to RPA specific wings at Williams &
Williams, Phil, I do recall someone weeks ago asking about Yak 52 specific wings.
If we can locate the art work, Williams & Williams will duplicate it, and put
the wings on their web site just as they did with our RPA wings. Please let
me know if you succeed in locating the art.
>
>Blitz
>
>Byron M Fox
>The RPA Store
>80 Milland Drive
>Mill Valley, CA 94941
>415-307-2405 Cell Days
>415-380-0907 Home Eves
>http://www.flyredstar.org/StoreCSVS/default.aspx
>
> href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
>
>
> __________________________________________________
>
>
Message 23
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | yak52 gear & flap rebuild/seal kits |
Talon,
Have you talked to Dennis? He usually keeps a few spares around. I have a strut
seal kits for the 50. But you need the actuator seal kits correct?
Doc
----- Original Message -----
From: David McGirt
Sent: 1/3/2007 5:35:58 PM
Subject: Yak-List: yak52 gear & flap rebuild/seal kits
Anyone happen to have some rebuild/seal kits on the shelf? Jill is out playing
like they have a life on vacation, and I need to get these sooner than later.
Email me off list if you like thanks all
David
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|