---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 02/13/07: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:49 AM - MP gauge (Jay Land) 2. 06:09 AM - Re: MP gauge (Stephen Fox) 3. 06:34 AM - Re: Aluminum tubing/ Alternators (Jill Gernetzke) 4. 06:55 AM - Re: MP gauge (Rob Kent - WLAC Russian Engineering) 5. 07:04 AM - Re: Yakk'in in Philly (seancrotty@aol.com) 6. 07:20 AM - Re: Re: Aluminum tubing/ Alternators (Ben Marsh) 7. 07:20 AM - Re: Yakk'in in Philly (Genzlinger, Reade) 8. 07:35 AM - Copper Tubing Replacement -- Easiest thing around... (Tom Johnson) 9. 08:24 AM - Re: MP gauge (Doug Sapp) 10. 08:50 AM - Re: Yakk'in in Philly (Roger Kemp) 11. 09:35 AM - Re: Re: Aluminum tubing/ Alternators (Walter Lannon) 12. 09:41 AM - Re: Copper Tubing Replacement -- Easiest thing around... (Walter Lannon) 13. 12:17 PM - Yak-52 Brake Cables (John A. Nielsen) ________________________________ Message 1 _____________________________________ Time: 05:49:06 AM PST US Subject: Yak-List: MP gauge From: Jay Land Anybody have a russian manifold pressure gauge for sale? Thanks, Jay ________________________________ Message 2 _____________________________________ Time: 06:09:11 AM PST US From: Stephen Fox Subject: Re: Yak-List: MP gauge Jay- I'd contact the Coy's or Jill Hayes at M-14P Inc. Steve Fox On Tuesday, February 13, 2007, at 09:02AM, "Jay Land" wrote: > > >Anybody have a russian manifold pressure gauge for sale? > >Thanks, > >Jay > > ________________________________ Message 3 _____________________________________ Time: 06:34:56 AM PST US From: Jill Gernetzke Subject: Yak-List: Re: Aluminum tubing/ Alternators Group, I have new metric tubing in stock - not truckloads, but I can be of help. Regarding the flare tool, Walt is correct. However, the O.D. of the tubing will not be held in place properly if you use the U.S. flare tool. Metric flare tools are available. i will dig into the source for these. We have used the 5052 aluminum tubing successfully. FYI: I offer a 5% discount off of list price on B&C Alternators when you order from me. Jill Gernetzke M-14P, Incorporated 4905 Flightline Drive Kingman, AZ 86401 -7417 (928)-681-4400 Fax(928)681-4404 www.m-14p.com ________________________________ Message 4 _____________________________________ Time: 06:55:52 AM PST US From: "Rob Kent - WLAC Russian Engineering" Subject: Re: Yak-List: MP gauge Jay, I've got some new gauges in stock. I can ship by any method of your choice from Fed-Ex next day before 10:30am to standard airmail at approx 7-10days. http://www.wlacrussianeng.co.uk/main.asp?ID=&Product=137 Regards Rob Kent Stores Manager WLAC - Russian Engineering www.wlacrussianeng.co.uk Tel: +44 1628 829 165 Fax: +44 1628 825 975 Mob: +44 7842 964 358 ----- Original Message ----- From: "Jay Land" Sent: Tuesday, February 13, 2007 1:48 PM Subject: Yak-List: MP gauge > > > Anybody have a russian manifold pressure gauge for sale? > > Thanks, > > Jay > > > ________________________________ Message 5 _____________________________________ Time: 07:04:08 AM PST US From: seancrotty@aol.com Subject: Re: Yak-List: Yakk'in in Philly Hey Doc how would I go about getting on that list? As I'm flying all over the place you never know where I might show up and I'd much rather be spending my time wiping oil off the belly and flying around some then sitting in a hotel room. Fly Safe Sean ________________________________ Message 6 _____________________________________ Time: 07:20:43 AM PST US From: "Ben Marsh" Subject: RE: Yak-List: Re: Aluminum tubing/ Alternators In restoring the -55 fuel lines and such, I have been successful wrapping the metric tubing with tape before flaring the artificially enlarged tubing with a U.S. flaring tool. It's cheating, but it works. Don't go too thick with the tape; else you'll crimp the tubing. Marsh -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Jill Gernetzke Sent: Tuesday, February 13, 2007 6:34 AM Subject: Yak-List: Re: Aluminum tubing/ Alternators Group, I have new metric tubing in stock - not truckloads, but I can be of help. Regarding the flare tool, Walt is correct. However, the O.D. of the tubing will not be held in place properly if you use the U.S. flare tool. Metric flare tools are available. i will dig into the source for these. We have used the 5052 aluminum tubing successfully. FYI: I offer a 5% discount off of list price on B&C Alternators when you order from me. Jill Gernetzke M-14P, Incorporated 4905 Flightline Drive Kingman, AZ 86401 -7417 (928)-681-4400 Fax(928)681-4404 www.m-14p.com ________________________________ Message 7 _____________________________________ Time: 07:20:50 AM PST US From: "Genzlinger, Reade" Subject: RE: Yak-List: Yakk'in in Philly Sean: Click on the Matronics link at the bottom of this message and scroll down to Yak list (second form bottom). Reade _____ From: seancrotty@aol.com [mailto:seancrotty@aol.com] Sent: Tuesday, February 13, 2007 10:04 AM Subject: Re: Yak-List: Yakk'in in Philly {SPAM?} Header Hey Doc how would I go about getting on that list? As I'm flying all over the place you never know where I might show up and I'd much rather be spending my time wiping oil off the belly and flying around some then sitting in a hotel room. Fly Safe Sean
Sean:
 
Click on the Matronics link at the bottom of this message and scroll down to Yak list (second form bottom).
 
Reade

From: seancrotty@aol.com [mailto:seancrotty@aol.com]
Sent: Tuesday, February 13, 2007 10:04 AM
To: yak-list@matronics.com
Subject: Re: Yak-List: Yakk'in in Philly

{SPAM?} Header

Hey Doc how would I go about getting on that list?

 
As I'm flying all over the place you never know where I might show up and I'd much rather be spending my time wiping oil off the belly and flying around some then sitting in a hotel room.
 
Fly Safe
 
Sean
________________________________ Message 8 _____________________________________ Time: 07:35:25 AM PST US From: "Tom Johnson" Subject: Yak-List: Copper Tubing Replacement -- Easiest thing around... Swagelok for tube products. www.swagelok.com For the 6mm, use regular stainless or aluminum 1/4" tube. Use a Swagelok 1/4 to 1/4 union (Part number: SS-400-6). $9.50 For 8mm use the Part number: SS-500-6 ($10.50) They have metric reducing unions also but they are harder to get and more expensive. This fitting requires no tricky flares, but instead uses a patented double ferrule. All you do is cut your line clean, slide this on, turn it 1.25 revs and you are done. It squeezes down perfectly on the 6mm tube and makes a perfect connection to the 1/4 tube section. Swagelok products are not cheap, but of amazing quality. Once you have used the no-flare "Tubelok" system you will never flare again. Tj --------------------------- Thomas Johnson Airpower Insurance, LLC 36 West Ocotillo Road Phoenix, AZ 85013-1235 Toll Free: 866-475-9199 Tel: 602-628-2701 Fax: 623-321-5843 www.airpowerinsurance.com E: tomjohnson@cox.net ________________________________ Message 9 _____________________________________ Time: 08:24:34 AM PST US From: Doug Sapp Subject: Re: Yak-List: MP gauge Jay, I have the stock MP's for the CJ6 if that is acceptable. Always Yakin, Doug Jay Land wrote: > > >Anybody have a russian manifold pressure gauge for sale? > >Thanks, > >Jay > > > > ________________________________ Message 10 ____________________________________ Time: 08:50:32 AM PST US From: "Roger Kemp" Subject: Re: Yak-List: Yakk'in in Philly Sean, Try https://www.flyredstar.org Once you call up the website, go to the members roster. There you will find the country page followed by the region page. Click on the region and you will find the member names listed along with the state they are located in and an email address. Sorry no phone numbers listed, probably for privacy. Hope this helps, Doc ----- Original Message ----- From: Sent: 2/13/2007 9:11:17 AM Subject: Re: Yak-List: Yakk'in in Philly Hey Doc how would I go about getting on that list? As I'm flying all over the place you never know where I might show up and I'd much rather be spending my time wiping oil off the belly and flying around some then sitting in a hotel room. Fly Safe Sean ________________________________ Message 11 ____________________________________ Time: 09:35:11 AM PST US From: "Walter Lannon" Subject: Re: Yak-List: Re: Aluminum tubing/ Alternators Jill; Please note your comments apply to the 6mm tubing only. The standard aircraft flaring tool works perfectly with the 8 mm tubing as the O.D. is the same. I did not suggest the use of the standard flare tool with the 6 mm tubing though this can be done very successfully with an appropriate shim (I use a piece of 400 grit wet-or-dry) If you can obtain a metric aircraft standard flaring tool I would be interested in purchasing one. Industrial or Automotive units may be something other than 74 degs. Walt ----- Original Message ----- From: "Jill Gernetzke" Sent: Tuesday, February 13, 2007 6:34 AM Subject: Yak-List: Re: Aluminum tubing/ Alternators > > Group, > > I have new metric tubing in stock - not truckloads, but I can be of help. > Regarding the flare tool, Walt is correct. However, the O.D. of the > tubing will not be held in place properly if you use the U.S. flare tool. > Metric flare tools are available. i will dig into the source for these. > > We have used the 5052 aluminum tubing successfully. > > FYI: I offer a 5% discount off of list price on B&C Alternators when you > order from me. > > > Jill Gernetzke > M-14P, Incorporated > 4905 Flightline Drive > Kingman, AZ 86401 -7417 > (928)-681-4400 > Fax(928)681-4404 > www.m-14p.com > > > ________________________________ Message 12 ____________________________________ Time: 09:41:29 AM PST US From: "Walter Lannon" Subject: Re: Yak-List: Copper Tubing Replacement -- Easiest thing around... Hi Tom; Swagelock is great but this is a temporary, get-it-home, fix. Once home you replace the damaged tube, don't you? Cheers; Walt ----- Original Message ----- From: Tom Johnson To: Yak-List@Matronics. Com Sent: Tuesday, February 13, 2007 7:34 AM Subject: Yak-List: Copper Tubing Replacement -- Easiest thing around... Swagelok for tube products. www.swagelok.com For the 6mm, use regular stainless or aluminum 1/4" tube. Use a Swagelok 1/4 to 1/4 union (Part number: SS-400-6). $9.50 For 8mm use the Part number: SS-500-6 ($10.50) They have metric reducing unions also but they are harder to get and more expensive. This fitting requires no tricky flares, but instead uses a patented double ferrule. All you do is cut your line clean, slide this on, turn it 1.25 revs and you are done. It squeezes down perfectly on the 6mm tube and makes a perfect connection to the 1/4 tube section. Swagelok products are not cheap, but of amazing quality. Once you have used the no-flare "Tubelok" system you will never flare again. Tj --------------------------- Thomas Johnson Airpower Insurance, LLC 36 West Ocotillo Road Phoenix, AZ 85013-1235 Toll Free: 866-475-9199 Tel: 602-628-2701 Fax: 623-321-5843 www.airpowerinsurance.com E: tomjohnson@cox.net ________________________________ Message 13 ____________________________________ Time: 12:17:40 PM PST US From: "John A. Nielsen" Subject: Yak-List: Yak-52 Brake Cables I am about to produce a direct replacement brake cable for a Yak 52. (the one that terminates at the forward control stick). The original got pinched as it went through the floor. I can get a break on price for qty of 12 or more. Price is expected be $110 plus shipping. All components are AN hardware and cable is SS. Can you all help me with demand for an initial order? Reply to this message or to my e-mail directly. Thank you. John Nielsen www.NielsenFord.com www.HighPerformanceAircraftProducts.com Bloomer WI Cell: 715-829-6512 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.