---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 07/24/07: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:25 AM - Re: Yak-List Digest: 12 Msgs - 07/21/07 (Tim Gagnon) 2. 06:59 AM - Lucky one.... (Jerome van der Schaar) 3. 08:04 AM - Re: Yak-List Digest: 12 Msgs - 07/21/07 (Jim Bernier) 4. 11:33 AM - Re: Re: Yak-List Digest: 12 Msgs - 07/21/07 (Roger Kemp) 5. 11:48 AM - Re: Re: Yak-List Digest: 12 Msgs - 07/21/07 (Craig Schneider) 6. 12:11 PM - Re: Re: Yak-List Digest: 12 Msgs - 07/21/07 (Roger Kemp) 7. 12:30 PM - Re: Re: Yak-List Digest: 12 Msgs - 07/21/07 (Roger Kemp) 8. 12:40 PM - Re: Re: Yak-List Digest: 12 Msgs - 07/21/07 (Jim Bernier) 9. 12:46 PM - Gathering of Mustangs and Legends (Craig Winkelmann) 10. 07:35 PM - Re: Gathering of Mustangs and Legends (Tim Gagnon) 11. 07:37 PM - Re: Yak-List Digest: 12 Msgs - 07/21/07 (Tim Gagnon) 12. 07:39 PM - Re: Air system problem.... (Tim Gagnon) 13. 07:42 PM - Re: Re: Gathering of Mustangs and Legends (steve and donna hanshew) ________________________________ Message 1 _____________________________________ Time: 06:25:06 AM PST US Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 From: "Tim Gagnon" > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 ________________________________ Message 2 _____________________________________ Time: 06:59:21 AM PST US From: "Jerome van der Schaar" Subject: Yak-List: Lucky one.... See this guy land at the highway last weekend. http://journalbg.wmod.llnwd.net/a521/o1/wtmjtv/72307_raw_41planeland.wmv ________________________________ Message 3 _____________________________________ Time: 08:04:59 AM PST US From: "Jim Bernier" Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Just run a relief tub to the exhaust stack. Only good on a stainless exhaust. And be certain that you are the last one in formation. Cheap smoke. Short lived. >>> "Tim Gagnon" 7/24/2007 8:24 AM >>> > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 ________________________________ Message 4 _____________________________________ Time: 11:33:04 AM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Nothing like YELLOW RAIN streaming down the side of the fuselage! Doc -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Tim Gagnon Sent: Tuesday, July 24, 2007 8:24 AM Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 ________________________________ Message 5 _____________________________________ Time: 11:48:55 AM PST US Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 From: "Craig Schneider" The vision we all get is that you sit on a stack of cushions...not that you're hung like a horse. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Tim Gagnon Sent: Tuesday, July 24, 2007 9:24 AM Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 ________________________________ Message 6 _____________________________________ Time: 12:11:23 PM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 I think they call it the "six inch dream"...since this thread had degenerated to such! At least that's what you told all the girls! Doc -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Craig Schneider Sent: Tuesday, July 24, 2007 1:51 PM Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 The vision we all get is that you sit on a stack of cushions...not that you're hung like a horse. -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Tim Gagnon Sent: Tuesday, July 24, 2007 9:24 AM Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 ________________________________ Message 7 _____________________________________ Time: 12:30:04 PM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Needs a stainless steel injector tip also or it to will corrode. Nothing worse than a corroded limp injector tip in the stainless steel exhaust! Doc From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of Jim Bernier Sent: Tuesday, July 24, 2007 10:04 AM Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Just run a relief tub to the exhaust stack. Only good on a stainless exhaust. And be certain that you are the last one in formation. Cheap smoke. Short lived. >>> "Tim Gagnon" 7/24/2007 8:24 AM >>> > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 http://forums.matronics.com============= Navigator to browse Subscriptions page, Chat, FAQ, http://www.matronics.com/Navigator?Yak-List ________________________________ Message 8 _____________________________________ Time: 12:40:50 PM PST US From: "Jim Bernier" Subject: RE: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Need to monitor the vacuum gauge on the relief tube to the exhaust stack. Could be a problem concentrating on flying. Enough of that, gone to far already. >>> "Roger Kemp" 7/24/2007 2:29 PM >>> Needs a stainless steel injector tip also or it to will corrode. Nothing worse than a corroded limp injector tip in the stainless steel exhaust! Doc From:owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matr onics.com] On Behalf Of Jim Bernier Sent: Tuesday, July 24, 2007 10:04 AM Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 Just run a relief tub to the exhaust stack. Only good on a stainless exhaust. And be certain that you are the last one in formation. Cheap smoke. Short lived. >>> "Tim Gagnon" 7/24/2007 8:24 AM >>> > Have you ever tried to use a piddle pack in a 50 without an autopilot? I just throw it over the side. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125472#125472 http://forums.matronics.com============== ( http://forums.matronics.com/ ) ( http://forums.matronics.com/ ) ( http://forums.matronics.com/ ) Subject: Yak-List: Gathering of Mustangs and Legends Hey all: Is anybody planning on attending the Gathering of Mustangs and Legends planned for Sept 29 and 30 in Columbus, Ohio? At present, they have almost 100 P-51s signed up to be there including civilian acts and military performances. In addition, they will have planes the Mustang flew with and against. I know they aren't round engines and were made it the US.....This should be a great event. If 10 want to go, RPA could get a box for group box seating. I'm willing to coordinate. Contact me offline if you are interested. Need to know soon. Craig Winkelmann, CFI Soon to be CJ Owner ________________________________ Message 10 ____________________________________ Time: 07:35:00 PM PST US Subject: Yak-List: Re: Gathering of Mustangs and Legends From: "Tim Gagnon" If enough people are going to this, I will have a little get together at my hangar about 30 minutes away. We can have a little fly-in in conjunction with the GML and maybe do a mass form up to Rick... Thoughts? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125601#125601 ________________________________ Message 11 ____________________________________ Time: 07:37:01 PM PST US Subject: Yak-List: Re: Yak-List Digest: 12 Msgs - 07/21/07 From: "Tim Gagnon" viperdoc(at)mindspring.co wrote: > I think they call it the "six inch dream"...since this thread had > degenerated to such! At least that's what you told all the girls! > Doc > > -- Six inches! I am not folding it in half for anyone! Back on topic...where a diaper. I talked again to a guy today about an external, we may get started on a prototype. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125602#125602 ________________________________ Message 12 ____________________________________ Time: 07:39:26 PM PST US Subject: Yak-List: Re: Air system problem.... From: "Tim Gagnon" Brian, nice to see you again and thanks for the advice. I ran the test Mark recommended today and if I simply had better hearing, I could have avoided all of them and found the problem. I did figure out that I have a good check valve and started valve though. Right main is leaking from the front cap where the rod end goes. They come out tomorrow and will be shipped for overhaul. Thanks for the input fellas! Read this topic online here: http://forums.matronics.com/viewtopic.php?p=125603#125603 ________________________________ Message 13 ____________________________________ Time: 07:42:43 PM PST US From: "steve and donna hanshew" Subject: Re: Yak-List: Re: Gathering of Mustangs and Legends Tim, When is it? Second weekend in September?? Donna Hanshew ----- Original Message ----- From: "Tim Gagnon" Sent: Tuesday, July 24, 2007 10:34 PM Subject: Yak-List: Re: Gathering of Mustangs and Legends > > If enough people are going to this, I will have a little get together at > my hangar about 30 minutes away. We can have a little fly-in in > conjunction with the GML and maybe do a mass form up to Rick... > > Thoughts? > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=125601#125601 > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.