---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Sun 12/23/07: 13 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:57 AM - Parachutes? (skidmk) 2. 12:15 PM - Re: Parachutes? (viperdoc) 3. 12:32 PM - Re: Parachutes? (Brian Lloyd) 4. 04:54 PM - WANTED - IRIS for M14 (David McGirt) 5. 06:17 PM - Re: White Paper on Russian Generator System (tjyak50) 6. 06:31 PM - New CJ Canopy Glass (ByronMFox@aol.com) 7. 06:54 PM - Re: WANTED - IRIS for M14 (Tim Gagnon) 8. 07:05 PM - Re: Re: WANTED - IRIS for M14 (David McGirt) 9. 07:13 PM - Re: Re: WANTED - IRIS for M14 (cjpilot710@aol.com) 10. 07:51 PM - Re: Re: White Paper on Russian Generator System (Roger Kemp) 11. 08:46 PM - B&C Alternator (Tom Johnson) 12. 09:54 PM - Re: Re: White Paper on Russian Generator System (Brian Lloyd) 13. 09:56 PM - Re: B&C Alternator (Brian Lloyd) ________________________________ Message 1 _____________________________________ Time: 11:57:34 AM PST US Subject: Yak-List: Parachutes? From: "skidmk" Hi,,, anyone out there contemplating selling spare chutes? Looking to outfit my cj for the spring. will need something that is repackable and useable. Mike -------- Mike "Skidmk" Bourget Ottawa, Ontario Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153838#153838 ________________________________ Message 2 _____________________________________ Time: 12:15:44 PM PST US From: "viperdoc" Subject: RE: Yak-List: Parachutes? Look at the Strong and National parachute website. They sometimes have used chutes and if you get it from them you will be guaranteed that all the ADs have been complied with. Doc -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of skidmk Sent: Sunday, December 23, 2007 1:57 PM Subject: Yak-List: Parachutes? Hi,,, anyone out there contemplating selling spare chutes? Looking to outfit my cj for the spring. will need something that is repackable and useable. Mike -------- Mike "Skidmk" Bourget Ottawa, Ontario Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153838#153838 ________________________________ Message 3 _____________________________________ Time: 12:32:04 PM PST US From: Brian Lloyd Subject: Re: Yak-List: Parachutes? On Dec 23, 2007, at 12:14 PM, viperdoc wrote: > > Look at the Strong and National parachute website. They sometimes > have used > chutes and if you get it from them you will be guaranteed that all > the ADs > have been complied with. I have a National and would never buy another. It is just too painful to sit on. Alan Silver usually knows where there are good used 'chutes available. See: http://www.silverparachutes.com/ He even has a spot on his web site where you can sign up for a used 'chute when one becomes available. -- Brian Lloyd 3191 Western Drive brian HYPHEN 1927 AT lloyd DOT com Cameron Park, CA 95682 +1.916.367.2131 (voice) +1.270.912.0788 (fax) I fly because it releases my mind from the tyranny of petty things . . . Antoine de Saint-Exupry PGP key ID: 12095C52A32A1B6C PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C ________________________________ Message 4 _____________________________________ Time: 04:54:48 PM PST US Subject: Yak-List: WANTED - IRIS for M14 From: David McGirt If you have a full size IRIS you would like to part with, please email me off list =AD alum or Titanium , used or new.. David McGirt ________________________________ Message 5 _____________________________________ Time: 06:17:32 PM PST US Subject: Yak-List: Re: White Paper on Russian Generator System From: "tjyak50" This topic is officially back alive... My generator has not been tripping off correctly at low RPM (Reverse Current). I installed a new Carbon Pile Regulator with no change. Installed a spare DMR-200D (S/n: 1361243) "Combined Device" and the problem actually got worse, where the battery would dead short at shut down. (Thanks a lot Bill!) I opened my original Combined Device (S/n: 1861584) and cleaned the points which looked grody. Also started messing with the adjustments. See the Reverse Polarization relay here: http://www.youtube.com/watch?v=Nou8dcJAA7s There are 2 adjustments on the "Teter-Toter". One to adjust the relative position of the contacts, the other I have no idea but it would be convenient if it adjusted the thing that doesn't work. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153927#153927 ________________________________ Message 6 _____________________________________ Time: 06:31:42 PM PST US From: ByronMFox@aol.com Subject: Yak-List: New CJ Canopy Glass We have two long-suffering French RPA members who have been struggling to import two CJs from China for several years. Looks like it's finally going to happen no thanks to the French authorities. They are interested in installing new tinted canopies and are familiar LP Aero Plastics in Jeanette, PA, but wonder if anyone out there knows of other good sources. Please let me know. Merry Christmas and Thanks, ...Blitz ************************************** See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004) ________________________________ Message 7 _____________________________________ Time: 06:54:11 PM PST US Subject: Yak-List: Re: WANTED - IRIS for M14 From: "Tim Gagnon" What airplane are you putting it on? I have an Iris (Yak-50) and have yet to figure out how to control it. Mine is fixed for now but I have NEVER had an issue with temps...even in the summer. I do not have the original controls for the louvers so I am starting over... Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153935#153935 ________________________________ Message 8 _____________________________________ Time: 07:05:31 PM PST US Subject: Re: Yak-List: Re: WANTED - IRIS for M14 From: David McGirt Using it for a little experiment on my TW.. :) On 12/23/07 9:53 PM, "Tim Gagnon" wrote: > > What airplane are you putting it on? I have an Iris (Yak-50) and have yet to > figure out how to control it. Mine is fixed for now but I have NEVER had an > issue with temps...even in the summer. > > I do not have the original controls for the louvers so I am starting over... > > > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=153935#153935 > > > > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 07:13:37 PM PST US From: cjpilot710@aol.com Subject: Re: Yak-List: Re: WANTED - IRIS for M14 I had one on my CJ when I first put the M-14p on. I didn't like it. First even when closed my engine was to cool. It raddled, looked awful because the paint was always scratched and was not "typical" of the CJ's looks. It seemed to "belong" to the Sukoys and such. Not the Yaks or CJs I got rid of it after a couple years. Pappy In a message dated 12/23/2007 9:55:00 P.M. Eastern Standard Time, NiftyYak50@fuse.net writes: --> Yak-List message posted by: "Tim Gagnon" What airplane are you putting it on? I have an Iris (Yak-50) and have yet to figure out how to control it. Mine is fixed for now but I have NEVER had an issue with temps...even in the summer. I do not have the original controls for the louvers so I am starting over... Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153935#153935 **************************************See AOL's top rated recipes (http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004) ________________________________ Message 10 ____________________________________ Time: 07:51:07 PM PST US From: "Roger Kemp" Subject: RE: Yak-List: Re: White Paper on Russian Generator System Tj, Contact mark.bitterlich@navy.mil. He has worked this problem before. Doc -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of tjyak50 Sent: Sunday, December 23, 2007 8:17 PM Subject: Yak-List: Re: White Paper on Russian Generator System This topic is officially back alive... My generator has not been tripping off correctly at low RPM (Reverse Current). I installed a new Carbon Pile Regulator with no change. Installed a spare DMR-200D (S/n: 1361243) "Combined Device" and the problem actually got worse, where the battery would dead short at shut down. (Thanks a lot Bill!) I opened my original Combined Device (S/n: 1861584) and cleaned the points which looked grody. Also started messing with the adjustments. See the Reverse Polarization relay here: http://www.youtube.com/watch?v=Nou8dcJAA7s There are 2 adjustments on the "Teter-Toter". One to adjust the relative position of the contacts, the other I have no idea but it would be convenient if it adjusted the thing that doesn't work. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=153927#153927 ________________________________ Message 11 ____________________________________ Time: 08:46:42 PM PST US From: "Tom Johnson" Subject: Yak-List: B&C Alternator Interested to hear from those who have installed the B&C or Jasco alternator in a Yak. Do any of our regular Yak suppliers have special pricing or is it all direct? Tj --------------------------- Thomas Johnson, Airpower Insurance, LLC 36 West Ocotillo Road, Phoenix, AZ 85013-1235 Tel: 602-628-2701 or Toll Free: 866-475-9199 E: tomjohnson@cox.net or Fax: 623-321-5843 Free Quote: www.airpowerinsurance.com * Privacy Information ** NO insurance can be started or changed by email until confirmed in writing. ________________________________ Message 12 ____________________________________ Time: 09:54:37 PM PST US From: Brian Lloyd Subject: Re: Yak-List: Re: White Paper on Russian Generator System On Dec 23, 2007, at 6:16 PM, tjyak50 wrote: > > This topic is officially back alive... > > My generator has not been tripping off correctly at low RPM > (Reverse Current). I installed a new Carbon Pile Regulator with no > change. Why keep messing with the generator? It is heavy and prone to failure. Why not just switch to an alternator and be done with the problems? The switch is easier on the M14 as there is already a seal for the generator shaft coupling. Is it because there is not a dirt- cheap, bolt-on solution? -- Brian Lloyd 3191 Western Drive brian HYPHEN 1927 AT lloyd DOT com Cameron Park, CA 95682 +1.916.367.2131 (voice) +1.270.912.0788 (fax) I fly because it releases my mind from the tyranny of petty things . . . Antoine de Saint-Exupry PGP key ID: 12095C52A32A1B6C PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C ________________________________ Message 13 ____________________________________ Time: 09:56:12 PM PST US From: Brian Lloyd Subject: Re: Yak-List: B&C Alternator On Dec 23, 2007, at 8:38 PM, Tom Johnson wrote: > Interested to hear from those who have installed the B&C or Jasco > alternator in a Yak. B&C works extremely well and is very expensive. Most of the other conversion I have seen are GM truck alternators. They work really well and are dirt cheap once you weld the spline coupling onto the alternator shaft. -- Brian Lloyd 3191 Western Drive brian HYPHEN 1927 AT lloyd DOT com Cameron Park, CA 95682 +1.916.367.2131 (voice) +1.270.912.0788 (fax) I fly because it releases my mind from the tyranny of petty things . . . Antoine de Saint-Exupry PGP key ID: 12095C52A32A1B6C PGP key fingerprint: 3B1D BA11 4913 3254 B6E0 CC09 1209 5C52 A32A 1B6C ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.