Today's Message Index:
----------------------
1. 10:33 AM - Re: Re: Scott Taliwheel for Yak 55M (Yak 55M)
2. 11:04 AM - Re: Re: Scott Taliwheel for Yak 55M (Herb Coussons)
3. 06:37 PM - Re: Re: Scott Taliwheel for Yak 55M (Dr Andre Katz)
4. 06:43 PM - Re: Scott Taliwheel for Yak 55M (mikspin)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Scott Taliwheel for Yak 55M |
Hi Wes,
I am interested.
Regards,
Anthony.
On Fri, Apr 3, 2009 at 7:00 PM, Wesley Warner <warner.wesley@gmail.com>wrote:
> Ok. The guy got back to me tonight. He sent me a pic of the adapters
> he has left (7 of them) and is looking for the digital file. I think
> they are complete except for a counter-bore hole and a final
> sanding/finishing. I'm trying to work a deal with him on all 7. If
> it works out, they should be around $150ea with the final
> sanding/finishing to be done by the buyer. They're made of 7075
> Aluminum. They bolt up to the existing tailwheel spring on Yak 55 and
> 55M's with no modifications. If anyone is interested, please let me
> know so, I can give him the go-ahead or not.
>
> Thanks, Wes
>
> On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner <warner.wesley@gmail.com>
> wrote:
> > Mike,
> > The guy I was working with was supposed to get back to me. I just
> > spoke with him a few minutes ago, and lit a fire. :) He made it seem
> > as though the file was gone because it has been so long. However,
> > he's going to look. He said that if he had the file and the rest of
> > the parts from the initial run, and I bought them, he would include
> > the file (if he can find it). I'll keep you updated.
> >
> > Wes
> >
> > On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike@gmail.com> wrote:
> >>
> >> Wes,
> >>
> >> I never saw a reply post on this, did you say that you had or could get
> some drawings on the Scott tailwheel adapter that was machined?
> >>
> >> Please lemme know,
> >>
> >> Mike Hastings
> >>
> >>
> >>
> >>
> >> Read this topic online here:
> >>
> >> http://forums.matronics.com/viewtopic.php?p=237409#237409
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> ===========
> ===========
> ===========
> ralle, List Admin.
> ===========
> >>
> >>
> >>
> >>
> >
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Scott Taliwheel for Yak 55M |
Count me in.
Herb Coussons
639-8434
On Apr 3, 2009, at 9:00 PM, Wesley Warner wrote:
> Ok. The guy got back to me tonight. He sent me a pic of the adapters
> he has left (7 of them) and is looking for the digital file. I think
> they are complete except for a counter-bore hole and a final
> sanding/finishing. I'm trying to work a deal with him on all 7. If
> it works out, they should be around $150ea with the final
> sanding/finishing to be done by the buyer. They're made of 7075
> Aluminum. They bolt up to the existing tailwheel spring on Yak 55 and
> 55M's with no modifications. If anyone is interested, please let me
> know so, I can give him the go-ahead or not.
>
> Thanks, Wes
>
> On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner
> <warner.wesley@gmail.com> wrote:
>> Mike,
>> The guy I was working with was supposed to get back to me. I just
>> spoke with him a few minutes ago, and lit a fire. :) He made it seem
>> as though the file was gone because it has been so long. However,
>> he's going to look. He said that if he had the file and the rest of
>> the parts from the initial run, and I bought them, he would include
>> the file (if he can find it). I'll keep you updated.
>>
>> Wes
>>
>> On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike@gmail.com> wrote:
>>>
>>> Wes,
>>>
>>> I never saw a reply post on this, did you say that you had or
>>> could get some drawings on the Scott tailwheel adapter that was
>>> machined?
>>>
>>> Please lemme know,
>>>
>>> Mike Hastings
>>>
>>>
>>>
>>>
>>> Read this topic online here:
>>>
>>> http://forums.matronics.com/viewtopic.php?p=237409#237409
>>>
>>>
>>>
>>>
>>>
>>>
>>>
> ===========
> ===========
> ===========
> ralle, List Admin.
> ===========
>>>
>>>
>>>
>>>
>>
> <IMG_0117.JPG>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Scott Taliwheel for Yak 55M |
count me in=0A=0Aandres=0A=0A=0A=0A________________________________=0AFrom:
Herb Coussons <drc@wscare.com>=0ATo: yak-list@matronics.com=0ASent: Saturd
ay, April 4, 2009 1:02:56 PM=0ASubject: Re: Yak-List: Re: Scott Taliwheel f
om>=0A=0ACount me in.=0A=0AHerb Coussons=0A639-8434=0A=0A=0AOn Apr 3, 2009,
at 9:00 PM, Wesley Warner wrote:=0A=0A> Ok. The guy got back to me tonigh
t. He sent me a pic of the adapters=0A> he has left (7 of them) and is loo
king for the digital file. I think=0A> they are complete except for a coun
ter-bore hole and a final=0A> sanding/finishing. I'm trying to work a deal
with him on all 7. If=0A> it works out, they should be around $150ea with
the final=0A> sanding/finishing to be done by the buyer. They're made of
7075=0A> Aluminum. They bolt up to the existing tailwheel spring on Yak 55
and=0A> 55M's with no modifications. If anyone is interested, please let
me=0A> know so, I can give him the go-ahead or not.=0A>=0A> Thanks, Wes=0A>
=0A> On Thu, Apr 2, 2009 at 3:57 PM, Wesley Warner =0A> <warner.wesley@gma
il.com> wrote:=0A>> Mike,=0A>> The guy I was working with was supposed to
get back to me. I just=0A>> spoke with him a few minutes ago, and lit a fi
re. :) He made it seem=0A>> as though the file was gone because it has bee
n so long. However,=0A>> he's going to look. He said that if he had the f
ile and the rest of=0A>> the parts from the initial run, and I bought them,
he would include=0A>> the file (if he can find it). I'll keep you updated
.=0A>>=0A>> Wes=0A>>=0A>> On Thu, Apr 2, 2009 at 2:57 PM, mikspin <acromike
e@gmail.com>=0A>>>=0A>>> Wes,=0A>>>=0A>>> I never saw a reply post on this,
did you say that you had or =0A>>> could get some drawings on the Scott t
ailwheel adapter that was =0A>>> machined?=0A>>>=0A>>> Please lemme know,
=0A>>>=0A>>> Mike Hastings=0A>>>=0A>>>=0A>>>=0A>>>=0A>>> Read this topic on
line here:=0A>>>=0A>>> http://forums.matronics.com/viewtopic.php?p=237409
#237409=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A>>>=0A> =======
======0A> =============0A> ====
=========0A> ralle, List Admin.=0A> =======
============
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Scott Taliwheel for Yak 55M |
Wes,
Put me down for one as well.
Thanks
Mike Hastings
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=237757#237757
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|