Today's Message Index:
----------------------
1. 06:47 AM - adjust oil cooler door (skidmk)
2. 12:03 PM - Re: adjust oil cooler door (Walter Lannon)
3. 04:06 PM - Yak55 Tailwheel adapter (Wesley Warner)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | adjust oil cooler door |
Hi,, doing the annual and we've found when the oil door indicator is fully closed
(and the knob won't turn anymore) the door under the belly is hanging down
about 3 inches. how do we adjust this?
M
--------
Mike "Skidmk" Bourget
Ottawa, Ontario
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=237803#237803
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: adjust oil cooler door |
Mike;
That probably means the retention of the cable housing has failed for some
reason.
The housing must be firmly clamped to structure near the operating end. If
that has come loose the housing will move with cable actuation.
Walt
----- Original Message -----
From: "skidmk" <skidmk@gmail.com>
Sent: Sunday, April 05, 2009 6:47 AM
Subject: Yak-List: adjust oil cooler door
>
> Hi,, doing the annual and we've found when the oil door indicator is fully
> closed (and the knob won't turn anymore) the door under the belly is
> hanging down about 3 inches. how do we adjust this?
>
> M
>
> --------
> Mike "Skidmk" Bourget
> Ottawa, Ontario
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=237803#237803
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Yak55 Tailwheel adapter |
Guys,
It looks like there is enough interest that it will be a go. I'll
call the machinist on Monday and confirm everything. Thursday I am
supposed to travel out to California (where the machinist is). I am
going to take the sample that I have from when he started the run to
be sure that everything is right with them. Hopefully they'll be
finished before I return home. I'll report back as soon as possible.
Wes
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|