Today's Message Index:
----------------------
1. 05:40 AM - Re: data plate (A. Dennis Savarese)
2. 05:47 AM - Re: Yak-List Digest: 2 Msgs - 04/12/09 (Jeff Linebaugh)
3. 12:50 PM - Re: Needed CJ 285HP Exhaust Segments Needed (Craig Winkelmann)
4. 12:52 PM - Re: Big Spinner on the CJ (Craig Winkelmann)
5. 01:01 PM - Re: Free SPOT personal locator and tracker. Ends 26 March.... (Craig Winkelmann)
6. 04:05 PM - SUN N FUN 2009 (Dave \)
7. 04:20 PM - Re: Re: Needed CJ 285HP Exhaust Segments Needed (vectorwarbirds@aol.com)
8. 04:20 PM - Re: Re: Needed CJ 285HP Exhaust Segments Needed (vectorwarbirds@aol.com)
9. 06:37 PM - Re: Needed CJ 285HP Exhaust Segments Needed (N642K)
10. 07:30 PM - Re: data plate (Bulldog)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I'm amazed the FAA let you put the aircraft identification on with a
P-Touch machine! I believe the regulation specifies it is suppose to be
fireproof.
I use the data plate shown in the Wag Aero catalog, their part number
H-742-000, for $7.95. Just checked and no photo in their on-line store.
It meets all FAA and USDEA requirements and is stainless steel. I take
them to the local trophy shop and have them engraved.
Dennis
----- Original Message -----
From: Jon Boede
To: yak-list@matronics.com
Sent: Sunday, April 12, 2009 11:00 PM
Subject: Yak-List: data plate
Anybody have a good/preferred source for nice data plates and getting
them engraved? I need six for the helicopters.
The FAA came out Friday and issued an airworthiness certificate for
the first helicopter. Their only nit was the lack of a data plate,
which we put on with a p-touch.
We also got 120 new stainless braided hoses (all hoses, hydraulic,
fuel, oil) for the 2x Mi-24 helicopters. One is only a condition
inspection away from the a/w application as well... we're striking while
our stars are in alignment!
Jon
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 04/12/09 |
Aircraft spruce has data plates. Take them to your local trophy shop
and you'll be set! Good luck Jon.
Jeff
jefflinebaugh@gmail.com
Sent from iPhone
On Apr 13, 2009, at 1:59 AM, Yak-List Digest Server <yak-list@matronics.com
> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest
> formatted
> in HTML for viewing with a web browser and features Hyperlinked
> Indexes
> and Message Navigation. The .txt file includes the plain ASCII
> version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 09-04-12&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 09-04-12&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Sun 04/12/09: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 03:54 AM - Re: Big Spinner on the CJ (Craig Payne)
> 2. 09:04 PM - data plate (Jon Boede)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 03:54:54 AM PST US
> From: "Craig Payne" <cpayne@joimail.com>
> Subject: Yak-List: Re: Big Spinner on the CJ
>
> Just checked my Crowder spinner and bulkhead. Bulkhead is OK, maybe
> because I made
> up a 3/16" thick by 6-1/4" SS mounting plate that backs it up. The
> spinner
> itself will crack from time to time, around the edges of the outside
> shell.
> So far I have never seen a crack on the inside shell. At one time I
> had the prop
> and spnner assembly balanced to .15 IPS but each time you remove and
> replace
> for maintainance, the balance changes a little.
>
> I still have that big spinner project on the back burner. Lately
> some friends with
> homebuilts have helped turn up the heat a little. What I'd like to
> do is build
> a 20" dia. spinner using spun aluminum bulkheads and a composite
> shell. So
> far the problem is finding a lathe big enough and cheap enough to do
> the job.
>
>
> Craig Payne
> cpayne@joimail.com
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 09:04:23 PM PST US
> From: Jon Boede <jonboede@hotmail.com>
> Subject: Yak-List: data plate
>
>
> Anybody have a good/preferred source for nice data plates and
> getting them
> engraved? I need six for the helicopters.
>
> The FAA came out Friday and issued an airworthiness certificate for
> the fir
> st helicopter. Their only nit was the lack of a data plate=2C which
> we put
> on with a p-touch.
>
> We also got 120 new stainless braided hoses (all hoses=2C
> hydraulic=2C fuel
> =2C oil) for the 2x Mi-24 helicopters. One is only a condition
> inspection
> away from the a/w application as well... we're striking while our
> stars are
> in alignment!
>
> Jon
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Needed CJ 285HP Exhaust Segments Needed |
I would thing Doug Sapp can help you out with that part....
Craig W
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=238991#238991
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Big Spinner on the CJ |
Craig:
The spinner could be one of the best bang for the buck speed mods for a CJ. If
you had the specs for the machined aluminum, there is a company in Australia
that makes spinner for other aircraft. I contacted them last year and they were
not interested in making the backing plate but could make the spinner.
Contact me off list if you want the name of the company, etc.
Craig W.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=238993#238993
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Free SPOT personal locator and tracker. Ends 26 March.... |
Tim:
Thanks for posting this. I got one. Very impressive little unit. Spot also allow
you to have a website that can track your specific unit. The Spot can be
set up to update your position every 10 minutes. Nice for those family members
at home that want to track where you are. This is in addition to the satellite
911 capability and the ability to send a text message to an e-mail address
that says you are OK or that you need help.
Craig
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=238996#238996
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
All: Trying to get a count as to who is going down on Monday to Sun
and Fun. Pappy and I are going to meet in crescent city to fly down
together. Anyone else want to join the Gaggle?
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Needed CJ 285HP Exhaust Segments Needed |
Nope, only got new stainless, not worth putting those with an old exhaust.? We
just need the one stock segment, lower right, nothing fancy.
Still looking.
Thanks
-----Original Message-----
From: Craig Winkelmann <capav8r@gmail.com>
Sent: Mon, 13 Apr 2009 12:49 pm
Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed
I would thing Doug Sapp can help you out with that part....
Craig W
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=238991#238991
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Needed CJ 285HP Exhaust Segments Needed |
Ah that would be lower left, from the CP!?
-----Original Message-----
From: Craig Winkelmann <capav8r@gmail.com>
Sent: Mon, 13 Apr 2009 12:49 pm
Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed
I would thing Doug Sapp can help you out with that part....
Craig W
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=238991#238991
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Needed CJ 285HP Exhaust Segments Needed |
I think I have one. let me check when I get home in a few days.
Mike
940 390-4747
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=239033#239033
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Jon,
Long time reader of this forum and first time post. You may want to check out www.engravers.net out of Granby, CT. They will engrave third party plates or you can select from several they carry. I have one at their shop now and I'll let you know how it turns out.
Best Regards,
Steve
--------
Steve Ritzi
N708BD
Scottish Aviation Bulldog
Royal Air Force XX708
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=239037#239037
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|