---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Mon 04/13/09: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:40 AM - Re: data plate (A. Dennis Savarese) 2. 05:47 AM - Re: Yak-List Digest: 2 Msgs - 04/12/09 (Jeff Linebaugh) 3. 12:50 PM - Re: Needed CJ 285HP Exhaust Segments Needed (Craig Winkelmann) 4. 12:52 PM - Re: Big Spinner on the CJ (Craig Winkelmann) 5. 01:01 PM - Re: Free SPOT personal locator and tracker. Ends 26 March.... (Craig Winkelmann) 6. 04:05 PM - SUN N FUN 2009 (Dave \) 7. 04:20 PM - Re: Re: Needed CJ 285HP Exhaust Segments Needed (vectorwarbirds@aol.com) 8. 04:20 PM - Re: Re: Needed CJ 285HP Exhaust Segments Needed (vectorwarbirds@aol.com) 9. 06:37 PM - Re: Needed CJ 285HP Exhaust Segments Needed (N642K) 10. 07:30 PM - Re: data plate (Bulldog) ________________________________ Message 1 _____________________________________ Time: 05:40:42 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: data plate I'm amazed the FAA let you put the aircraft identification on with a P-Touch machine! I believe the regulation specifies it is suppose to be fireproof. I use the data plate shown in the Wag Aero catalog, their part number H-742-000, for $7.95. Just checked and no photo in their on-line store. It meets all FAA and USDEA requirements and is stainless steel. I take them to the local trophy shop and have them engraved. Dennis ----- Original Message ----- From: Jon Boede To: yak-list@matronics.com Sent: Sunday, April 12, 2009 11:00 PM Subject: Yak-List: data plate Anybody have a good/preferred source for nice data plates and getting them engraved? I need six for the helicopters. The FAA came out Friday and issued an airworthiness certificate for the first helicopter. Their only nit was the lack of a data plate, which we put on with a p-touch. We also got 120 new stainless braided hoses (all hoses, hydraulic, fuel, oil) for the 2x Mi-24 helicopters. One is only a condition inspection away from the a/w application as well... we're striking while our stars are in alignment! Jon ________________________________ Message 2 _____________________________________ Time: 05:47:13 AM PST US From: Jeff Linebaugh Subject: Yak-List: Re: Yak-List Digest: 2 Msgs - 04/12/09 Aircraft spruce has data plates. Take them to your local trophy shop and you'll be set! Good luck Jon. Jeff jefflinebaugh@gmail.com Sent from iPhone On Apr 13, 2009, at 1:59 AM, Yak-List Digest Server wrote: > * > > ================================================= > Online Versions of Today's List Digest Archive > ================================================= > > Today's complete Yak-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest > formatted > in HTML for viewing with a web browser and features Hyperlinked > Indexes > and Message Navigation. The .txt file includes the plain ASCII > version > of the Yak-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 09-04-12&Archive=Yak > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 09-04-12&Archive=Yak > > > =============================================== > EMail Version of Today's List Digest Archive > =============================================== > > > ---------------------------------------------------------- > Yak-List Digest Archive > --- > Total Messages Posted Sun 04/12/09: 2 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 03:54 AM - Re: Big Spinner on the CJ (Craig Payne) > 2. 09:04 PM - data plate (Jon Boede) > > > ________________________________ Message 1 > _____________________________________ > > > Time: 03:54:54 AM PST US > From: "Craig Payne" > Subject: Yak-List: Re: Big Spinner on the CJ > > Just checked my Crowder spinner and bulkhead. Bulkhead is OK, maybe > because I made > up a 3/16" thick by 6-1/4" SS mounting plate that backs it up. The > spinner > itself will crack from time to time, around the edges of the outside > shell. > So far I have never seen a crack on the inside shell. At one time I > had the prop > and spnner assembly balanced to .15 IPS but each time you remove and > replace > for maintainance, the balance changes a little. > > I still have that big spinner project on the back burner. Lately > some friends with > homebuilts have helped turn up the heat a little. What I'd like to > do is build > a 20" dia. spinner using spun aluminum bulkheads and a composite > shell. So > far the problem is finding a lathe big enough and cheap enough to do > the job. > > > Craig Payne > cpayne@joimail.com > > ________________________________ Message 2 > _____________________________________ > > > Time: 09:04:23 PM PST US > From: Jon Boede > Subject: Yak-List: data plate > > > Anybody have a good/preferred source for nice data plates and > getting them > engraved? I need six for the helicopters. > > The FAA came out Friday and issued an airworthiness certificate for > the fir > st helicopter. Their only nit was the lack of a data plate=2C which > we put > on with a p-touch. > > We also got 120 new stainless braided hoses (all hoses=2C > hydraulic=2C fuel > =2C oil) for the 2x Mi-24 helicopters. One is only a condition > inspection > away from the a/w application as well... we're striking while our > stars are > in alignment! > > Jon > > ________________________________ Message 3 _____________________________________ Time: 12:50:59 PM PST US Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed From: "Craig Winkelmann" I would thing Doug Sapp can help you out with that part.... Craig W Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238991#238991 ________________________________ Message 4 _____________________________________ Time: 12:52:53 PM PST US Subject: Yak-List: Re: Big Spinner on the CJ From: "Craig Winkelmann" Craig: The spinner could be one of the best bang for the buck speed mods for a CJ. If you had the specs for the machined aluminum, there is a company in Australia that makes spinner for other aircraft. I contacted them last year and they were not interested in making the backing plate but could make the spinner. Contact me off list if you want the name of the company, etc. Craig W. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238993#238993 ________________________________ Message 5 _____________________________________ Time: 01:01:36 PM PST US Subject: Yak-List: Re: Free SPOT personal locator and tracker. Ends 26 March.... From: "Craig Winkelmann" Tim: Thanks for posting this. I got one. Very impressive little unit. Spot also allow you to have a website that can track your specific unit. The Spot can be set up to update your position every 10 minutes. Nice for those family members at home that want to track where you are. This is in addition to the satellite 911 capability and the ability to send a text message to an e-mail address that says you are OK or that you need help. Craig Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238996#238996 ________________________________ Message 6 _____________________________________ Time: 04:05:59 PM PST US From: "Dave \"Goatboy\" Jester" Subject: Yak-List: SUN N FUN 2009 All: Trying to get a count as to who is going down on Monday to Sun and Fun. Pappy and I are going to meet in crescent city to fly down together. Anyone else want to join the Gaggle? ________________________________ Message 7 _____________________________________ Time: 04:20:18 PM PST US Subject: Re: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed From: vectorwarbirds@aol.com Nope, only got new stainless, not worth putting those with an old exhaust.? We just need the one stock segment, lower right, nothing fancy. Still looking. Thanks -----Original Message----- From: Craig Winkelmann Sent: Mon, 13 Apr 2009 12:49 pm Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed I would thing Doug Sapp can help you out with that part.... Craig W Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238991#238991 ________________________________ Message 8 _____________________________________ Time: 04:20:36 PM PST US Subject: Re: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed From: vectorwarbirds@aol.com Ah that would be lower left, from the CP!? -----Original Message----- From: Craig Winkelmann Sent: Mon, 13 Apr 2009 12:49 pm Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed I would thing Doug Sapp can help you out with that part.... Craig W Read this topic online here: http://forums.matronics.com/viewtopic.php?p=238991#238991 ________________________________ Message 9 _____________________________________ Time: 06:37:14 PM PST US Subject: Yak-List: Re: Needed CJ 285HP Exhaust Segments Needed From: "N642K" I think I have one. let me check when I get home in a few days. Mike 940 390-4747 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=239033#239033 ________________________________ Message 10 ____________________________________ Time: 07:30:48 PM PST US Subject: Yak-List: Re: data plate From: "Bulldog" Jon, Long time reader of this forum and first time post. You may want to check out www.engravers.net out of Granby, CT. They will engrave third party plates or you can select from several they carry. I have one at their shop now and I'll let you know how it turns out. Best Regards, Steve -------- Steve Ritzi N708BD Scottish Aviation Bulldog Royal Air Force XX708 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=239037#239037 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.