---------------------------------------------------------- Yak-List Digest Archive --- Total Messages Posted Tue 04/21/09: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:25 AM - Re: Magneto high tension lead (lie.buyse@pandora.be) 2. 04:04 AM - Re: Magneto high tension lead (A. Dennis Savarese) 3. 08:23 AM - Re: Magneto high tension lead (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E) 4. 02:38 PM - Re: Converting Yak 55 to Cleveland wheels and brakes (Wesley Warner) 5. 03:40 PM - Re: Converting Yak 55 to Cleveland wheels and brakes (A. Dennis Savarese) 6. 04:02 PM - Re: Converting Yak 55 to Cleveland wheels and brakes (Wesley Warner) 7. 04:18 PM - Re: Converting Yak 55 to Cleveland wheels and brakes (A. Dennis Savarese) ________________________________ Message 1 _____________________________________ Time: 02:25:43 AM PST US From: "lie.buyse@pandora.be" Subject: Re: Yak-List: Magneto high tension lead Indeed, the internal "cigarette" INSIDE the mag. Lieven Buyse >----- Oorspronkelijk bericht ----- >Van : Yak Pilot [mailto:yakplt@yahoo.com] >Verzonden : dinsdag , april 21, 2009 12:35 AM >Aan : yak-list@matronics.com >Onderwerp : Re: Yak-List: Magneto high tension lead > >Are we talking about the internal "cigarette" inside the mag, or the wire going from the starting spark transformer TO the mag? > >I'm confused. > >Mark Bitterlich > > >________________________________ >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 2:04:04 PM >Subject: Re: Yak-List: Magneto high tension lead > > >No. You will see how the end fits into the starting coil when you remove it and the lead into the magneto is the same as all the other spark plug wires. >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 12:48 PM >Subject: Re: Yak-List: Magneto high tension lead > >Thanks Dennis, >Is it necessary to solder some kind of "head" onboth copper ends? >Lieven B. >----- Original Message ----- >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 1:38 PM >Subject: Re: Yak-List: Magneto high tension lead > >Here is a link to 7 mm wire which I have used in the past with no problems. http://www.mfgsupply.com/m/c/24-8775.html >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 6:32 AM >Subject: Yak-List: Magneto high tension lead > >Hi, > >Anyone knows if the magneto high tension lead (insulated 7,5 cm long and 7 >mm wide pencil like rod wich connects the high tension coil to the >distributor cap), can be repaired or substituted by a piece of spark plug >wire? Insulation is burnt by arcing and I can't find a spare one. Unless I >buy an overhauled one, but it has only 20 hours since overhaul! > >L. Buyse >Yak52 nbsp; Navigator Photoshare, and href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics========================<; via the Web href="http://forums.matronics.com">http://forums.matronics.com >_p; generous bsp; href="http://www.matronics.com/contribution">http://www.matronics.com/c================ > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com >href="http://www.matronics.com/contribution">http://www.matronics.com/c > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-Listhref="http://forums.matronics.com">http://forums.matronics.com >href="http://www.matronics.com===== ________________________________ Message 2 _____________________________________ Time: 04:04:41 AM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Magneto high tension lead Ahhh! I misinterpreted your email. Please do not try to use the 7 mm wire I sent the link to. I do not have a fix for the internal cigarette. Sorry. Dennis ----- Original Message ----- From: lie.buyse@pandora.be To: yak-list@matronics.com Sent: Tuesday, April 21, 2009 4:24 AM Subject: Re: Yak-List: Magneto high tension lead Indeed, the internal "cigarette" INSIDE the mag. Lieven Buyse >----- Oorspronkelijk bericht ----- >Van : Yak Pilot [mailto:yakplt@yahoo.com] >Verzonden : dinsdag , april 21, 2009 12:35 AM >Aan : yak-list@matronics.com >Onderwerp : Re: Yak-List: Magneto high tension lead > >Are we talking about the internal "cigarette" inside the mag, or the wire going from the starting spark transformer TO the mag? > >I'm confused. > >Mark Bitterlich > > > > > >________________________________ >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 2:04:04 PM >Subject: Re: Yak-List: Magneto high tension lead > > >No. You will see how the end fits into the starting coil when you remove it and the lead into the magneto is the same as all the other spark plug wires. >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 12:48 PM >Subject: Re: Yak-List: Magneto high tension lead > >Thanks Dennis, >Is it necessary to solder some kind of "head" on both copper ends? >Lieven B. >----- Original Message ----- >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 1:38 PM >Subject: Re: Yak-List: Magneto high tension lead > >Here is a link to 7 mm wire which I have used in the past with no problems. http://www.mfgsupply.com/m/c/24-8775.html >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 6:32 AM >Subject: Yak-List: Magneto high tension lead > >Hi, > >Anyone knows if the magneto high tension lead (insulated 7,5 cm long and 7 >mm wide pencil like rod wich connects the high tension coil to the >distributor cap), can be repaired or substituted by a piece of spark plug >wire? Insulation is burnt by arcing and I can't find a spare one. Unless I >buy an overhauled one, but it has only 20 hours since overhaul! > >L. Buyse >Yak52 nbsp; Navigator Photoshare, and href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics ========================< ; via the Web href="http://forums.matronics.com">http://forums.matronics.com >_p; generous bsp; href="http://www.matronics.com/contribution">http://www.matronics.com/c ================ > > > > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronhr ef="http://forums.matronics.com">http://forums.matronics.com >href="http://www.matronics.com/contribution">http://www.matronics.com/ c > > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronic s.com/Navigator?Yak-Listhref="http://forums.matronics.com">http://forum s.matronics.com >href="http://www.matronics.com===== ________________________________ Message 3 _____________________________________ Time: 08:23:06 AM PST US Subject: RE: Yak-List: Magneto high tension lead From: "Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E" Lieven, there should be several sources in the U.S. for that part. George Coy, Carl Hays, Vladimir Yastremski, etc. George is: Motorstar NA 714 Airport Rd. Swanton VT 05488 802-868-5633 off 802-363-5782 cell george.coy@gmail.com SKYPE george.coy motorstarna.com Vladimir Yastremski 858-780-1860 yastremski@msn.com Carl Hays, via Jill Gernetzke M-14P, Incorporated 4905 Flightline Drive Kingman, AZ 86401 -7417 (928)-681-4400 Fax(928)681-4404 www.m-14p.com Mark Bitterlich -----Original Message----- From: owner-yak-list-server@matronics.com [mailto:owner-yak-list-server@matronics.com] On Behalf Of A. Dennis Savarese Sent: Tuesday, April 21, 2009 7:02 AM Subject: Re: Yak-List: Magneto high tension lead Ahhh! I misinterpreted your email. Please do not try to use the 7 mm wire I sent the link to. I do not have a fix for the internal cigarette. Sorry. Dennis ----- Original Message ----- From: lie.buyse@pandora.be To: yak-list@matronics.com Sent: Tuesday, April 21, 2009 4:24 AM Subject: Re: Yak-List: Magneto high tension lead Indeed, the internal "cigarette" INSIDE the mag. Lieven Buyse >----- Oorspronkelijk bericht ----- >Van : Yak Pilot [mailto:yakplt@yahoo.com] >Verzonden : dinsdag , april 21, 2009 12:35 AM >Aan : yak-list@matronics.com >Onderwerp : Re: Yak-List: Magneto high tension lead > >Are we talking about the internal "cigarette" inside the mag, or the wire going from the starting spark transformer TO the mag? > >I'm confused. > >Mark Bitterlich > > > > > >________________________________ >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 2:04:04 PM >Subject: Re: Yak-List: Magneto high tension lead > > >No. You will see how the end fits into the starting coil when you remove it and the lead into the magneto is the same as all the other spark plug wires. >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 12:48 PM >Subject: Re: Yak-List: Magneto high tension lead > >Thanks Dennis, >Is it necessary to solder some kind of "head" on both copper ends? >Lieven B. >----- Original Message ----- >From: A. Dennis Savarese >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 1:38 PM >Subject: Re: Yak-List: Magneto high tension lead > >Here is a link to 7 mm wire which I have used in the past with no problems. http://www.mfgsupply.com/m/c/24-8775.html >Dennis >----- Original Message ----- >From: lieven buyse >To: yak-list@matronics.com >Sent: Monday, April 20, 2009 6:32 AM >Subject: Yak-List: Magneto high tension lead > >Hi, > >Anyone knows if the magneto high tension lead (insulated 7,5 cm long and 7 >mm wide pencil like rod wich connects the high tension coil to the >distributor cap), can be repaired or substituted by a piece of spark plug >wire? Insulation is burnt by arcing and I can't find a spare one. Unless I >buy an overhauled one, but it has only 20 hours since overhaul! > >L. Buyse >Yak52 nbsp; Navigator Photoshare, and href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics==== ===================<; via the Web href="http://forums.matronics.com">http://forums.matronics.com >_p; generous bsp; href="http://www.matronics.com/contribution">http://www.matronics.com/c==== =========== > > > > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronhref="h ttp://forums.matronics.com">http://forums.matronics.com >href="http://www.matronics.com/contribution">http://www.matronics.com/c > > > >href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com /Navigator?Yak-Listhref="http://forums.matronics.com">http://forums.matronic s.com >href="http://www.matronics.com====p; Navigator Photoshare, and href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics==== ===================<; via the Web href="http://forums.matronics.com">http://forums.matronics.com _p; generous bsp; href="http://www.matronics.com/contribution">http://www.matronics.com/c==== =========== ________________________________ Message 4 _____________________________________ Time: 02:38:12 PM PST US Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes From: Wesley Warner These are the the ones I used... Std. Disc 199-104 $1589.00 http://www.aircraftspruce.com/catalog/lgpages/cleve_homebuiltwb.php Hope that helps. Wes On Mon, Apr 20, 2009 at 2:18 PM, A. Dennis Savarese wrote: > Has anyone converted their Yak 55M to Cleveland wheels and brakes and if > yes, would you mind posting what the Cleveland part numbers are for the > conversion? Thanks very much. > Dennis > > A. Dennis Savarese > 334-285-2141 > 334-546-8182 (cell) > Skype: yakworld1 > www.yak-52.com > > ________________________________ Message 5 _____________________________________ Time: 03:40:33 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes Thank you very much Wes. Much appreciated. Dennis ----- Original Message ----- From: Wesley Warner To: yak-list@matronics.com Sent: Tuesday, April 21, 2009 4:36 PM Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes These are the the ones I used... Std. Disc 199-104 $1589.00 http://www.aircraftspruce.com/catalog/lgpages/cleve_homebuiltwb.php Hope that helps. Wes On Mon, Apr 20, 2009 at 2:18 PM, A. Dennis Savarese wrote: > Has anyone converted their Yak 55M to Cleveland wheels and brakes and if > yes, would you mind posting what the Cleveland part numbers are for the > conversion? Thanks very much. > Dennis > > A. Dennis Savarese > 334-285-2141 > 334-546-8182 (cell) > Skype: yakworld1 > www.yak-52.com > > > > ________________________________ Message 6 _____________________________________ Time: 04:02:51 PM PST US Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes From: Wesley Warner Sure. No problem. BTW, I used 15X6.00-6 tires. Are you planning on using gear extensions, or just adapters? On Tue, Apr 21, 2009 at 6:30 PM, A. Dennis Savarese wrote: > Thank you very much Wes. Much appreciated. > Dennis > > > ----- Original Message ----- > From: Wesley Warner > To: yak-list@matronics.com > Sent: Tuesday, April 21, 2009 4:36 PM > Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes > > These are the the ones I used... > > Std. Disc 199-104 $1589.00 > > http://www.aircraftspruce.com/catalog/lgpages/cleve_homebuiltwb.php > > Hope that helps. > > Wes ________________________________ Message 7 _____________________________________ Time: 04:18:06 PM PST US From: "A. Dennis Savarese" Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes I am gathering this information out for a gentleman in France. So whatever suggestions you pass along, I pass along to him. Dennis ----- Original Message ----- From: Wesley Warner To: yak-list@matronics.com Sent: Tuesday, April 21, 2009 6:00 PM Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes Sure. No problem. BTW, I used 15X6.00-6 tires. Are you planning on using gear extensions, or just adapters? On Tue, Apr 21, 2009 at 6:30 PM, A. Dennis Savarese wrote: > Thank you very much Wes. Much appreciated. > Dennis > > > ----- Original Message ----- > From: Wesley Warner > To: yak-list@matronics.com > Sent: Tuesday, April 21, 2009 4:36 PM > Subject: Re: Yak-List: Converting Yak 55 to Cleveland wheels and brakes > > These are the the ones I used... > > Std. Disc 199-104 $1589.00 > > http://www.aircraftspruce.com/catalog/lgpages/cleve_homebuiltwb.php > > Hope that helps. > > Wes ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message yak-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Yak-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/yak-list Browse Digests http://www.matronics.com/digest/yak-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.