Today's Message Index:
----------------------
1. 06:11 AM - problem with my Baklan 5 radio (Kollmannsberger, Vincent)
2. 06:14 AM - Problem with Baklan5 radio (vincent)
3. 06:28 AM - Re: After market Tach (A. Dennis Savarese)
4. 06:39 AM - Re: problem with my Baklan 5 radio (A. Dennis Savarese)
5. 07:09 AM - Re: yak 52 panel (Bill VonDane / Whiskey Victor)
6. 08:44 AM - rear trim wheel for nanchang (skidmk)
7. 08:50 AM - 18T fabric (Joe Howse)
8. 10:04 AM - Re: problem with my Baklan 5 radio (vincent)
9. 10:09 AM - Re: After market Tach (shinden33)
10. 10:20 AM - M14 Tach (Joe Howse)
11. 10:21 AM - Xpnder Recomendations (shinden33)
12. 10:55 AM - Re: After market Tach (barryhancock)
13. 12:13 PM - Re: Re: problem with my Baklan 5 radio (A. Dennis Savarese)
14. 12:13 PM - Re: Re: After market Tach (A. Dennis Savarese)
15. 12:14 PM - Re: Re: After market Tach (Yak52w@aol.com)
16. 01:29 PM - Re: problem with my Baklan 5 radio (vincent)
17. 01:39 PM - Re: Re: problem with my Baklan 5 radio (cjpilot710@aol.com)
18. 02:47 PM - Re: Re: problem with my Baklan 5 radio (A. Dennis Savarese)
19. 02:54 PM - Re: Xpnder Recomendations (A. Dennis Savarese)
20. 05:05 PM - Re: problem with my Baklan 5 radio (Bitterlich, Mark G CIV Det Cherry Point, MALS-14 64E)
21. 07:43 PM - Re: Re: problem with my Baklan 5 radio (Roger Kemp M.D.)
22. 07:56 PM - Re: Re: After market Tach (Roger Kemp M.D.)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | problem with my Baklan 5 radio |
Hello,
I have a problem with my Baklan 5 radio on my yak 52. No emission and no
reception.
I saw on a forum that you had this problem. Can you tell me where I can
find the fuse to change ?
Thank you
vincent
Please help Logica to respect the environment by not printing this email /
Pour contribuer comme Logica au respect de l'environnement, merci de ne pa
s imprimer ce mail / Bitte drucken Sie diese Nachricht nicht aus und helfe
n Sie so Logica dabei die Umwelt zu schuetzen / Por favor ajude a Logica
a respeitar o ambiente nao imprimindo este correio electronico.
This e-mail and any attachment is for authorised use by the intended recipi
ent(s) only. It may contain proprietary material, confidential information
and/or be subject to legal privilege. It should not be copied, disclosed to
, retained or used by, any other party. If you are not an intended recipien
t then please promptly delete this e-mail and any attachment and all copies
and inform the sender. Thank you.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Problem with Baklan5 radio |
I have a problem with my Baklan 5 radio on my yak 52. No emission and no reception.
Some of you had this problem ?
Some talk about a fuse to change ? where is it ?
Thank you
Vincent
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243379#243379
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
Doc suggestion is a very good choice. If you're looking for JUST a
tach, take a look at the Horizon Instruments P-1000 tach. You can order
it configured to you needs. Just installed one in a CJ with an M14.
Dennis
----- Original Message -----
From: Roger Kemp M.D.
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 10:51 PM
Subject: RE: Yak-List: After market Tach
<viperdoc@mindspring.com>
Look at the Dynon EMS system for one. JPI also has one with a bunch of
bells
and whistles. It reports as rpm though not as % rpm. I have talked to
tech
support at Dynon about this. According to them, it is a simple
software
change but not enough people have asked for it for them feel it might
be of
benefit.
Also check with West London Aeroclub in England. I thought I saw a
tach
drive generator on their website.
But before you press off buying a new generator, have you looked to
see if
you have a broken wire in the sim plug? That is the most common cause
for
Tach Drive Generators to fail.
Viperdoc
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of shinden33
Sent: Saturday, May 09, 2009 7:45 PM
To: yak-list@matronics.com
Subject: Yak-List: After market Tach
On that note, anyone use an aftermarket tach? Any recommendations?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243328#243328
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
The Baklan 5 radio has a circuit breaker (no fuse) on the left hand
console. It is the last one in the series of 8 breakers and the one
closest to the main air valve.
Dennis
----- Original Message -----
From: Kollmannsberger, Vincent
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 7:56 AM
Subject: Yak-List: problem with my Baklan 5 radio
Hello,
I have a problem with my Baklan 5 radio on my yak 52. No emission and
no reception.
I saw on a forum that you had this problem. Can you tell me where I
can find the fuse to change ?
Thank you
vincent
Please help Logica to respect the environment by not printing this
email / Pour contribuer comme Logica au respect de l'environnement,
merci de ne pas imprimer ce mail / Bitte drucken Sie diese Nachricht
nicht aus und helfen Sie so Logica dabei die Umwelt zu schuetzen / Por
favor ajude a Logica a respeitar o ambiente n=E3o imprimindo este
correio electr=F3nico. This e-mail and any attachment is for authorised
use by the intended recipient(s) only. It may contain proprietary
material, confidential information and/or be subject to legal privilege.
It should not be copied, disclosed to, retained or used by, any other
party. If you are not an intended recipient then please promptly delete
this e-mail and any attachment and all copies and inform the sender.
Thank you.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: yak 52 panel |
Chanock... Here is my address if you find the right panels...
Bill VonDane
Whiskey Victor / ePanel Builder
8398 Cessna Drive
Peyton, CO 80831
----------------------------------------------
Whiskey Victor / ePanel Builder
www.whiskeyvictor.com
On Thu, May 7, 2009 at 8:21 PM, Chanock Richka <crichka@hotmail.com> wrote:
> I think I have aset, please call me at 954 961 9193 and I will look for it.
>
> Chanock Born to fly, Forced to work
>
>
>> From: bill.mail@whiskeyvictor.com
>> Date: Thu, 7 May 2009 14:27:26 -0600
>> Subject: Yak-List: yak 52 panel
>> To: yak-list@matronics.com
>>
>> <bill.mail@whiskeyvictor.com>
>>
>> I am looking for original yak 52 panels that I can have to help me put
>> the panel in CAD... Jill was nice enough to loan me the panels for a
>> bit, but I need some that I can remove the hinges and thumbscrews
>> from, basically I need some that someone no longer needs...
>>
>> Once I have them digitized I will add them to my ePanel Builder
>> (www.whiskeyvictor.com) and will be able to design and cut new custom
>> panels for other 52's...
>>
>> I already have the CJ panels digitized, just need to get them added to
>> the site...
>>
>> Thanks!
>> -Bill
>>
>> Whiskey Victor / ePanel Builder
>> www.whiskeyvictor.com / 719-510-085==========
>>
>>
>>
>
> ________________________________
> Hotmail goes with you. Get it on your BlackBerry or iPhone.
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | rear trim wheel for nanchang |
Hi all,
long story short. The trim cable on the rear cockpit has unspooled. Spent 3 hours
on it yesterday and cannot seem to get it back.
is there a diagram, or pictures someone might have to help me with this problem.
Is anyone familiar with a manual section?
Leaving for a red star event on Wednsday
thanks
Mike
--------
Mike "Skidmk" Bourget
Ottawa, Ontario
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243395#243395
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Has anyone recovered the wing surfaces on an 18T?
I am starting to recover ours using Stits material and would like to
use standard ribstitching.(through the wing and around the ribs rather
than sewing to the cloth wrapping on the ribs),
Comments please
Joe
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
I see no problem with the switch N 1 "VHF" on/off ok
There's something special to do/ to check?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243400#243400
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
Doc - already tried the cannon plug. I pulled the tach gen off and the shaft no
longer turns the guts.
Dennis & Fran - The horizon can be set up for %?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243401#243401
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
IN MY OPINION, THE UMA TACH SYSTEM FROM GEORGE COY IS THE BEST,
ANALOG IN KNOTS WITH HOUR METER
JOE
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Xpnder Recomendations |
All,
My Terra 250D (installed before I got the airplane) just did what most of these
species do - it died. Any recommendations on a reasonably priced / sized replacement?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243402#243402
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
I was first introduced to the Horizon Tach several years ago when I installed an
M14P in the "Super Pickle". Since then I have come to know the company pretty
well as they have programmed a couple of 337 tachs for the stock Housai for
us. It's a great product with super customer support. It is a good diagnostic
tool, very readable, and very reliable. The gauges are STC's for other applications.
For a stand alone replacement, I'm not aware of a product that comes close. And
for about the same money as a tach generator, you get a solid state replacement
that is dead nuts simple to wire (off the P-leads at the mag switch).
FWIW,
Barry
--------
Barry Hancock
Worldwide Warbirds, Inc.
www.worldwidewarbirds.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243406#243406
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
Most likely the radio unit has gone T.U.
Dennis
----- Original Message -----
From: vincent
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 12:03 PM
Subject: Yak-List: Re: problem with my Baklan 5 radio
<vincent.kollmannsberger@wanadoo.fr>
I see no problem with the switch N =C2=B0 1 "VHF" on/off ok
There's something special to do/ to check?
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243400#243400
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
Yes. The factory will do that for you.
Dennis
----- Original Message -----
From: shinden33
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 12:08 PM
Subject: Yak-List: Re: After market Tach
Doc - already tried the cannon plug. I pulled the tach gen off and
the shaft no longer turns the guts.
Dennis & Fran - The horizon can be set up for %?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243401#243401
Message 15
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
I second that suggestion. I have the Horizon tach in my 52 and have been
very pleased with it. a digital indication for mag drop and you can get the
indicator lights set for max continuous which provides a good "idiot" light
for rpm while flying formation.
Tim Stevens
In a message dated 5/10/2009 1:55:44 P.M. Eastern Daylight Time,
bhancock@worldwidewarbirds.com writes:
--> Yak-List message posted by: "barryhancock"
<bhancock@worldwidewarbirds.com>
I was first introduced to the Horizon Tach several years ago when I
installed an M14P in the "Super Pickle". Since then I have come to know the
company pretty well as they have programmed a couple of 337 tachs for the stock
Housai for us. It's a great product with super customer support. It is a
good diagnostic tool, very readable, and very reliable. The gauges are
STC's for other applications.
For a stand alone replacement, I'm not aware of a product that comes
close. And for about the same money as a tach generator, you get a solid state
replacement that is dead nuts simple to wire (off the P-leads at the mag
switch).
FWIW,
Barry
--------
Barry Hancock
Worldwide Warbirds, Inc.
www.worldwidewarbirds.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243406#243406
**************The Average US Credit Score is 692. See Yours in Just 2 Easy
Steps!
ay51009AvgfooterNO62)
Message 16
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
T.U ???
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243425#243425
Message 17
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
T.U. Means "TITS UP" or no longer working, inoperative, or broken in
American slang.
Pappy
In a message dated 5/10/2009 4:30:05 P.M. Eastern Daylight Time,
vincent.kollmannsberger@wanadoo.fr writes:
--> Yak-List message posted by: "vincent"
<vincent.kollmannsberger@wanadoo.fr>
T.U ???
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243425#243425
**************Recession-proof vacation ideas. Find free things to do in
the U.S.
(http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002)
Message 18
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
It means "tits up" or in other words, broken.
Dennis
----- Original Message -----
From: vincent
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 3:28 PM
Subject: Yak-List: Re: problem with my Baklan 5 radio
<vincent.kollmannsberger@wanadoo.fr>
T.U ???
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243425#243425
Message 19
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Xpnder Recomendations |
If you're looking for a small panel mount, there really isn't any
reasonably priced/sized transponders. The small Becker/round (fits a
57mm or 2 1/4" hole) is around $1850 US and a very good unit. The
Microair is similar and also about the same price. The alternative is
to find a standard size, yellow tagged unit that you can mount
vertically on the left side console. You may even find a good used one
on eBay.
Dennis
----- Original Message -----
From: shinden33
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 12:20 PM
Subject: Yak-List: Xpnder Recomendations
All,
My Terra 250D (installed before I got the airplane) just did what most
of these species do - it died. Any recommendations on a reasonably
priced / sized replacement?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243402#243402
Message 20
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | problem with my Baklan 5 radio |
Something in the back of my mind is telling me that there is also as fuse in the
radio mount itself.
BUT.... since I do not own a YAK-52 and I don't have a mount right in front of
me, don't quote me.
Mark Bitterlich
________________________________
From: owner-yak-list-server@matronics.com on behalf of A. Dennis Savarese
Sent: Sun 5/10/2009 9:20 AM
Subject: Re: Yak-List: problem with my Baklan 5 radio
The Baklan 5 radio has a circuit breaker (no fuse) on the left hand console. It
is the last one in the series of 8 breakers and the one closest to the main
air valve.
Dennis
----- Original Message -----
From: Kollmannsberger, Vincent <mailto:vincent.kollmannsberger@logica.com>
To: yak-list@matronics.com
Sent: Sunday, May 10, 2009 7:56 AM
Subject: Yak-List: problem with my Baklan 5 radio
Hello,
I have a problem with my Baklan 5 radio on my yak 52. No emission and no reception.
I saw on a forum that you had this problem. Can you tell me where I can find the
fuse to change ?
Thank you
vincent
Please help Logica to respect the environment by not printing this email / Pour
contribuer comme Logica au respect de l'environnement, merci de ne pas imprimer
ce mail / Bitte drucken Sie diese Nachricht nicht aus und helfen Sie so Logica
dabei die Umwelt zu schuetzen / Por favor ajude a Logica a respeitar o ambiente
no imprimindo este correio electrnico. This e-mail and any attachment is
for authorised use by the intended recipient(s) only. It may contain proprietary
material, confidential information and/or be subject to legal privilege.
It should not be copied, disclosed to, retained or used by, any other party. If
you are not an intended recipient then please promptly delete this e-mail and
any attachment and all copies and inform the sender. Thank you.
href="http://www.matronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/c
Message 21
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: problem with my Baklan 5 radio |
The position your tits are in when your laid in the box or the position your
female was left in when you finished assuming missionary was where you
started. Tits up. Worn out. Deceased. Broken beyond repair.
Some more of that fighter pilot humor.
Doc
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of vincent
Sent: Sunday, May 10, 2009 3:28 PM
Subject: Yak-List: Re: problem with my Baklan 5 radio
<vincent.kollmannsberger@wanadoo.fr>
T.U ???
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243425#243425
Message 22
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: After market Tach |
West London Aero Club Russian Engineering has them listed on their website
if you want to stay orginal.
I have a mix in my pane. The Dynon and the steam gauges mixed. In the 50,
the AS indicator is perfect for snap shots on final as is the % RPM. For a
snap shot, the position of a needle on a dill works better for me than tapes
and digital printouts. Now if I had the bucks to project the info on Beveled
Glass on the windscreen AKA HUD, well then the steam gauges would be gone.
Doc
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of shinden33
Sent: Sunday, May 10, 2009 12:08 PM
Subject: Yak-List: Re: After market Tach
Doc - already tried the cannon plug. I pulled the tach gen off and the
shaft no longer turns the guts.
Dennis & Fran - The horizon can be set up for %?
S
--------
The Defiant Company
www.thedefiantcompany.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=243401#243401
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|